English
FrançaisRegulations
Page 67 of 140, showing 20 records out of 2786 total, starting on record 1321, ending on 1340
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| Jatropha Stright Vegetable Oil (JSVO)- Specification | This Malawi Standard specifies requirements and test methods for marketed and delivered straight vegetable oil extracted from Jatropha carcus to be used at an agreed and approved percentage either as diesel or illuminating paraffin blend. | 2014-06-01 | Malawi Bureau of Standards | 29 September 2016 | |
| calcium carbonate, precipitated for cosmetic industry - Specification | This standard prescribes the requirements methods of sampling and tests for precipitated calcium carbonate for the cosmetic industry | 2014-06-01 | Malawi Bureau of Standards | 29 September 2016 | |
| The Malawi Gazette Suppliment, dated 13th February 2015 | Wheat flour for human wheat consumption prepared from common wheat. | 2014-06-01 | Malawi Bureau of Standards | Malawi Bureau of Standards Act, 2012 | 29 September 2016 |
| TZS 161: 2015 Chilli sauce — Specification | 0000-00-00 | Tanzania Bureau of Standards (TBS) | TZS 161: 2015 | 29 September 2016 | |
| TZS 152: 2015 Steel tubes — Mild steel tubes and sockets screwed — Specification | 2015-09-10 | Tanzania Bureau of Standards (TBS) | TZS 152: 2015 | 29 September 2016 | |
| TZS 160: 2013 Tomato sauce and ketchup — Specification | 2013-10-03 | Tanzania Bureau of Standards (TBS) | TZS 160: 2013 | 29 September 2016 | |
| US ISO 9312:2013, Resistance welding equipment — Insulated pins for use in electrode back-ups | This Uganda Standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment, or other live equipment, which need to be insulated from each other. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 9313:1989, Resistance welding equipment — Cooling tubes | This Uganda Standard specifies dimensions and tolerances of cooling tubes for resistance spot welding equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 9539:2010, Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes | This Uganda Standard specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes. Additional requirements on materials for some equipment are given in other standards. This standard is not applicable to materials used for the construction of welding hoses which are specified in US ISO 3821. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 10225:2013, Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes | This Uganda Standard specifies the gas letter code to be used for marking the equipment for gas welding, cutting and allied processes, when the full name of the gas cannot be used. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition) | This Uganda Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 14112:1996, Gas welding equipment — Small kits for gas brazing and welding | This Uganda Standard specifies safety requirements for the construction of small kits for brazing, soldering and welding for non-professional use. This standard is applicable to appliances whose welding equipment is completely set up in the factory and which use a liquefied gas or gas mixture as combustible gas, and compressed oxygen, air or an air/oxygen mixture for combustion. It is applicable to appliances which use gases contained in refillable containers having a maximum water capacity of 5 litres, or in disposable containers with maximum water capacity of 1 litre. It is not applicable to the following:appliances using acetylene or hydrogen as combustible gas;air-aspirated appliances;appliances working with an oxygen generator; andappliances working by electrolysis. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 14113:2013, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | This Uganda Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C. This standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This standard does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see US ISO 3821 and US ISO 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 14114:1999, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements | This Uganda Standard is applicable to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the connection of the flame arrestor. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes. This standard applies to acetylene cylinder manifold systems in which up to 16 acetylene single cylinders or two acetylene bundles are coupled for collective gas withdrawal. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 14373:2006, Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels | This Uganda Standard specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: • uncoated steels; • hot-dip zinc or iron-zinc alloy (galvannealed) coated steel; • electrolytic zinc, zinc-iron, or zinc-nickel coated steel; • aluminium coated steel; ad • zinc-aluminium coated steel. This standard is applicable to the welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm. Welding with the following types of equipment is within the scope of this standard: • pedestal welding equipment; • gun welders; • automatic welding equipment where the components are fed by robots or automatic feeding equipment; • multi welders; and • robotic welders. 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 15615:2013, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices | This Uganda Standard establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in US ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| TZS 1682:2014, Incineration plant for destruction of hospital waste — Method of test and calculation for the performance | This standard describes methods of test for the performance of the incineration plant to be carried after installation when the plant is operating in accordance with the manufacturer's instruction. In addition certain methods of calculation are given. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | 30 September 2016 | |
| TZS 1683:2014, Incineration plant for destruction of hospital waste — Method for specifying purchasers’ requirements | These standard details a method for specifying requirements for incinerators for the destruction of hospital waste manufactured to specifiers' requirements. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | 30 September 2016 | |
| TZS 1684:2014, Incineration plant for the destruction of hospital waste — Code of practice for the design, specification, installation and commissioning | This standard gives guidance on the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste. It also gives information on training of staff and maintenance of plant, on collection and transports of hospital waste. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | 30 September 2016 | |
| Fortified wheat flour - Specification | Requirements for fortified wheat flour direct for human consumption. | 2014-06-01 | Malawi Bureau of Standards | 30 September 2016 |
