English
FrançaisRegulations
Page 73 of 140, showing 20 records out of 2786 total, starting on record 1441, ending on 1460
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| TZS 927:2007 Plastic carrier bags – Specification | This measure specifies the minimum requirements of plastic carrier bags which shall be manufactured, imported and/or distributed in the country. It specifies requirements for the thickness for purpose of enhancing re-usability and re-cycleability in line with the available technology. The type of ink, which can be used for printing on the plastic material, has also been prescribed for the same purpose. | 2007-08-23 | Tanzania Bureau of Standards (TBS) | TZS 927:2007 | 03 October 2016 |
| TZS 940: 2015 Brandy — Specification | This measure prescribes the requirements for brandies | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 940: 2015 | 03 October 2016 |
| Ethanol Blend | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 of 2013 | 03 October 2016 | |
| US ISO 7240-21:2005, Fire detection and alarm systems — Part 21: Routing equipment | This Uganda Standard specifies requirements, methods of test, and performance criteria for fire-alarm routing (transmitting) equipment (see US ISO 7240-1) and for fault (trouble) warning routing equipment (see US ISO 7240-1) for use in fire detection and fire alarm systems installed in buildings. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 7240-22:2007, Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts | This Uganda Standard specifies requirements, test methods and performance criteria for smoke-detection equipment for ducts (s.d.e.d.) for use in fire-detection and fire alarm systems installed in buildings (see US ISO 7240-1). The s.d.e.d. samples the air from a duct and detects smoke in the sample. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 7240-23:2013, Fire detection and alarm systems — Part 23: Visual alarm devices | This Uganda Standard specifies the requirements, test methods and performance criteria for visual alarm devices in a fixed installation intended to signal a visual warning of a fire between a fire detection and alarm system and occupants in and around buildings. This standard specifies visual alarm devices for three types of application environment. It is only applicable to pulsing or flashing visual alarm devices, for example xenon beacons or rotating beacons. It is not applicable to devices giving continuous light output. This standard is not intended to cover visual indicators, for example, on detectors or on the control and indicating equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 7240-24:2010, Fire detection and alarm systems — Part 24: Sound-system loudspeakers | This Uganda Standard specifies requirements, test methods and performance criteria for loudspeakers intended to broadcast a warning of fire between a fire detection and alarm system and the occupants of a building (see US ISO 7240-1). This standard specifies loudspeakers for two types of application environment: type A, generally for indoor use, and type B, generally for outdoor use. This standard does not cover loudspeakers for special applications, for example loudspeakers for use in hazardous applications, if such applications require additional or other requirements or tests other than those given in this standard. This standard is not intended to cover addressable loudspeakers or loudspeakers with active components. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 7240-25:2010, Fire detection and alarm systems — Part 25: Components using radio transmission paths | This Uganda Standard specifies requirements, test methods and performance criteria for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of this standard. Where components work together and this requires knowledge of the system design, this standard also specifies requirements for the system. When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of US ISO 7240 apply together with this part of US ISO 7240. Requirements relevant to wire transmission paths are superseded or modified by those included in this standard. This standard does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices;the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; andthe allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 7240-27:2009, Fire detection and alarm systems — Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor | This Uganda Standard specifies requirements, test methods and performance criteria for multi-sensor point-type fire detectors that incorporate an optical or ionization smoke sensor, an electro-chemical cell for sensing carbon monoxide (CO) and, optionally, one or more heat sensors, for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). For the testing of other types of fire detectors using smoke, CO and, optionally, heat sensors working on different principles, this standard can be used only for guidance. Fire detectors using smoke, CO and, optionally, heat sensors which have special characteristics and which have been developed for specific risks are not covered by this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| Ethanol Blend | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 of 2013 | 03 October 2016 | |
| Ethanol Blend | 2013-02-22 | Statutory Instrument 23 of 2013 | 03 October 2016 | ||
| Ethanol Blend | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 0f 2013 | 03 October 2016 | |
| US ISO 7240-28:2009, Fire detection and alarm systems — Part 28: Fire protection control equipment | This Uganda Standard specifies requirements, methods of test and performance criteria for fire protection control equipment (f.p.c.e.) (see ISO 7240-1) connected to automatic fire protection equipment (a.f.p.e.) (see ISO 7240-1) installed in buildings. The f.p.c.e. receives signals from control and indicating equipment (see ISO 7240-1), sends control signals to, and indicates the condition of, the a.f.p.e. The control signals are used to initiate automatic fire protection equipment, such as pumps associated with fire suppression systems, control doors, dampers, fans and the like. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| Unleaded Petrol | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 0f 2013 | 03 October 2016 | |
| US ISO 16528-1:2007, Boilers and pressure vessels — Part 1: Performance requirements | This Uganda Standard defines the performance requirements for the construction of boilers and pressure vessels. It is not the intent of this standard to address operation, maintenance and in-service inspection of boilers and pressure vessels. In relation to the geometry of the pressure-containing parts for pressure vessels, the scope of this standard includes the following: • welding end connection for the first circumferential joint for welded connections; • first threaded joint for screwed connections; • face of the first flange for bolted, flanged connections; • first sealing surface for proprietary connections or fittings; • safety accessories, where necessary. In relation to the geometry of pressure-containing parts for boilers, the scope of this standard covers the following: • feedwater inlet (including the inlet valve) to steam outlet (including the outlet valve), including all inter-connecting tubing that can be exposed to a risk of overheating and cannot be isolated from the main system; • associated safety accessories; • connections to the boilers involved in services, such as draining, venting, superheating, etc. This standard does not apply for nuclear components, railway and marine boilers, gas cylinders or piping systems or mechanical equipment, e.g. turbine and machinery casings. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 5775-2:1996, Bicycle tyres and rims — Part 2: Rims | This Uganda Standard specifies rim dimensions for bicycle tyres: it gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim. US ISO 5775-1 covers designations and dimensions for tyres. ISO 5775 covers straight side (SS) rims, hooked bead (HB) rims and crotchet type (C) rims. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6698:1989, Cycles — Screw threads used to assemble freewheels on bicycle hubs | This Uganda Standard specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. It is based on the use of the ISO basic thread profile given in ISO 68; satisfactory interchangeability with the corresponding British Standard Cycle (B.S.C.) thread; this has required the use of an inch pitch (t.p.i.);the use of screw thread tolerance grades and tolerance positions given in ISO 965-l1; and the use of gauges made to ISO 1502. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| Unleaded petrol | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 0f 2013 | 03 October 2016 | |
| US ISO 6699:1990, Cycles — Stern and handlebar bend — Assembly dimensions | This Uganda Standard specifies the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend of a bicycle. lt applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. lt does not apply to specialized types of bicycle such as tradesmen’s delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| Unleaded Petrol | 2013-02-22 | Standards Assocaition of zimbabwe | Statutory Instrument 23 0f 2013 | 03 October 2016 |
