Non-Tariff Measure

NTM classification
B82: Testing requirement 
Date when the measure came into force
01 June 2010 
Publication where the measure is specified
Government Gazette No. 33059, 1 April 2010 
Regulation where the measure is specified
Amendment To The Compulsory Specification For Motor Vehicles Of Category N2/3 
Country/Region applying the measure
South Africa 
The rationale of the measure
1.1 This specification covers the requirements for motor vehicle models of category N2 and N3, not previously registered or licensed in South Africa, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 This specification does not apply to experimental or to prototype vehicles constructed or imported by the original manufacturers or importers for the purpose of testing, assessment or development, or to a type "A" military vehicle, or to special purpose vehicles of the type covered by National Road Traffic Act, 1996 (Act 93 of 1996), or to agricultural tractors.
1.4 The relevant requirements of this specification shall effect on the dates specified in schedule 1. 
Coded list of objectives
X: For purposes n.e.s. 
Description of the measure
3.3.4 For the purpose of this Compulsory Specification paragraph 2.3.6 of annex 4 of SABS ECE R 13 is amended to read as follows:
To check compliance with the requirements specified in paragraph 5.2.1.2.4 of SABS ECE R13, a Type-O test shall be carried out with the engine disconnected at an initial test speed of 30km/h. The mean fully developed deceleration on application of the control of the parking brake system and the deceleration immediately before the vehicle stops shall not be less than 1 ,5 m/s2. The test shall be carried out with a laden vehicle. The force exerted on the braking control device shall not exceed
the specified values. 
Reference of the measure
Regulations 3.3.4 
Measure also domestic
Yes 

Products affected by the measure.

Code Product Partial coverage Partial coverage indication Date in Date out
8708.30 - Brakes and servo-brakes; parts thereof No    
Description
Brakes and braking equipment 

Countries/Regions affected by the measure.

Inclusion/Exclusion Country Date in Date out
Inclusion Entire world    
Description
All countries