Non-Tariff Barriers

Non-Tariff Measure

NTM classification

B82: Testing requirement 

Date when the measure came into force

01 June 2010 

Publication where the measure is specified

Government Gazette No. 33059, 1 April 2010 

Regulation where the measure is specified

Amendment To The Compulsory Specification For Motor Vehicles Of Category M2/3 

Country/Region applying the measure

South Africa 

The rationale of the measure

1.1 This specification covers the requirements for motor vehicle models of category M2 and M3, and minibuses, not previously registered or licensed in South Africa, designed or adapted for operation on a public road. NOTE Except where stated otherwise, a semi-trailer bus should comply with a/l the requirements of this specification, and. in addition, with any compulsory requirements for the category 0 or N portions of the combination
not covered by this specification.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire speCification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 This specification does not apply to experimental or to prototype vehicles constructed or imported by the original manufacturers or importers for the purpose of testing, assessment or development.
1.4 The relevant requirements of this specification shall take effect on the dates as specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply 

Coded list of objectives

X: For purposes n.e.s. 

Description of the measure

3.3.1 Braking equipment shall be fitted to a vehicle and shall comply with the relevant requirements given in SABS ECE R13, Uniform provisions concerning the approval of vehicles of categories M, N and 0 with regard to braking, to the level of ECE R13.08:
Provided that the specific requirements for the type IIA testing of braking devices shall be applicable to all M3 vehicles of gross vehicle mass exceeding 10 t, other than any vehicle designed and equipped as a class I urban bus.
3.3.3 For vehicles fitted with anti-lock braking systems, the braking equipment shall, in terms of
braking performance, at least comply with the requirements for the vehicles with non anti-lock
braking systems fitted.
3.3.4 For the purposes of this specification, the following requirements of SABS ECE R13 are
excluded:
a) the fitment of automatic brake adjustment devices,
b) the compulsory fitment of anti-lock braking systems; and
c) anti-lock specific brake test procedure and its requirements (paragraph 5 of annex 13 of
SABS ECE R13). 

Reference of the measure

Regulation 3.3.1, 3.3.3 and 3.3.4 

Measure also domestic

Yes 

Products affected by the measure.

Description

Brakes and braking equipment of motor vehicles in catergory M2/3
Category M2 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and Reproduced by Sabinet Online in terms of Government Printer’s Copyright Authority No. 10505 dated 02 February 1998 that has a maximum mass not exceeding 5 t
Category M3 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and that has a maximum mass exceeding 5 t 

Countries/Regions affected by the measure.

Description

All countries