Non-Tariff Barriers

Non-Tariff Measure

NTM classification

B31: Labelling requirements 

Date when the measure came into force

19 January 2011 

Publication where the measure is specified

Government Gazette No.33763, 19 November 2010 

Regulation where the measure is specified

Amendment To The Compulsory Specification For Motor Vehicles Of Category N1 

Country/Region applying the measure

South Africa 

The rationale of the measure

1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. 

Coded list of objectives

X: For purposes n.e.s. 

Description of the measure

3.2.2.2 Windows and partitions
3.2.2.2.1 Glass partitions and glass windows fitted to a vehicle shall be of safety glass that complies with the relevant requirements given in the said SABS 1191 or in SABS 1193:1978, Toughened safety glass for vehicles, as published by Government Notice no. 463 of 9 July 1982.
3.2.2.2.2 For the purposes of this specification, the marking requirements shall be as follows:
a) the glass shall bear the glass manufacturer's registered trademark; and
b) the glass fitted shall comply with an approved national standard, recognized by the Regulatory Authority, that will provide a method of identifying the glass type. 

Reference of the measure

Regulation 3.2.2.2.2 

Measure also domestic

Yes 

Products affected by the measure.

Description

Glass partitions and glass windows for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods. 

Countries/Regions affected by the measure.

Description

All countries