English
FrançaisRegulations
Page 29 of 140, showing 20 records out of 2786 total, starting on record 561, ending on 580
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 60227-6: 2001, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 6: Lift cables and cables for flexible connections | This Uganda Standard details the particular specifications for both circular and flat lift cables and cables for flexible connections of rated voltages up to and including 450/750 V. Each cable complies with the appropriate requirements given in US IEC 60227-1, and with the particular requirements of this part of US IEC 60227. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60227-5:2011, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords) | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 | |
| US IEC 60227-4:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring | This Uganda Standard details the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V. Each cable shall comply with the appropriate requirements given in US IEC 60227-1 and the particular requirements of this part. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60227-3:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring | This Uganda Standard details the particular specifications for polyvinyl chloride insulated single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750V. All cables shall comply with the appropriate requirements given in US IEC 60227-1 and the individual types of cables shall each comply with the particular requirements of this part. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60227-1:2007, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 1: General requirements (2nd Edition) | This Uganda Standard applies to rigid and flexible cables with insulation, and sheath if any, based on polyvinyl chloride, of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60104:1987, Aluminium-magnesium-silicon alloy wire for overhead line conductors | This Uganda Standard is applicable to aluminium-magnesium-silicon alloy wires of two types having different mechanical and electrical properties for the manufacture of stranded conductors for overhead power transmission purposes. It specifies the mechanical and electrical properties of wires in the diameter range 1.50 mm to 4.50 mm. The two types are designated Type A and Type B respectively. (This Uganda Standard cancels and replaces US EAS 507:2008, Aluminium-magnesium-silicon alloy wire for overhead line conductors, which has been republished). | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 23 August 2016 |
| US IEC 60095-2:2009, Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals | This Uganda Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60095-1:2006, Lead-acid starter batteries — Part 1: General requirements and methods of test | This Uganda Standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". This standard specifies general requirements; essential functional characteristics, relevant test methods and results required, for several classes of starter batteries; according to the general type of application; and according to the type of product. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60086-5: 2011, Primary batteries — Part 5: Safety of batteries with aqueous electrolyte | This Uganda Standard specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-4: 2007, Primary batteries — Part 4: Safety of lithium batteries | This Uganda Standard specifies tests and requirements for primary batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-3: 2011, Primary batteries — Part 3: Watch batteries | This Uganda Standard specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-2: 2011, Primary batteries — Part 2: Physical and electrical specifications | This Uganda Standard is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions and the discharge test conditions and discharge performance requirements. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-1: 2011, Primary batteries — General | This Uganda Standard is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. This standard specifies test methods for testing primary cells and batteries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit | This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-3:2013, Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air | This Uganda Standard applies to power transformers as defined by and in the scope of US IEC 60076-1. It gives details of the applicable dielectric tests and minimum dielectric test levels. Recommended minimum external clearances in air between live parts and between live parts and earth are given for use when these clearances are not specified by the purchaser. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-2:2011, Power transformers — Part 2: Temperature rise for liquid-immersed transformers | This Uganda Standard applies to liquid-immersed transformers, identifies power transformers according to their cooling methods, defines temperature rise limits and gives the methods for temperature rise tests. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-1:2011, Power transformers — Part 1: General | This Uganda Standard applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; transformers, which have no windings with rated voltage higher than 1 000 V; instrument transformers; amongst others. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 857:2016, Thinner for acrylic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinner for acrylic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 856: 2016, 2-Pack acrylic resin based auto-refinishing paint — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for 2-Pack acrylic resin based auto-refinishing paint. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 855:2016, Thinner for synthetic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for synthetic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
