English
FrançaisNon-tariff Measures
Showing items 3061 to 3080 of 7642
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 186: 2013, Toilet soap — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, packaging, marking, sampling and test methods for toilet soap. It does not apply to carbolic soap or specialty soaps such as medicated soap, transparent soap, floating soap, liquid soap or sea-water soap. (This Uganda Standard cancels and replaces US EAS 186: 2011, Toilet soap — Specification, which has been technically revised).
- Reference of the measure
- US EAS 186: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- toilet soap
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 02 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US 310-1:2016, Cement — Part 1: Composition, specification and conformity criteria for common cements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives the Quality requirements, Marking, labelling, packaging and storage
for
common cements (The Uganda Standard cancels and replaces US 310-1:2001, Cement — Part 1: Composition, specifications, and conformity criteria for common cements, which has been technically revised) - Reference of the measure
- US 310-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cement
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 127-1: 2013, Synthetic detergent powders — Specification — Part 1: Household hand use (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packaging, marking and methods of sampling and test for synthetic detergents powders for household use. This standard does not cover machine wash and industrial detergent powders. (This Uganda Standard cancels and replaces US EAS 127:2011, Synthetic laundry detergents for household use — Specification, which has been technically revised).
- Reference of the measure
- US EAS 127-1: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- synthetic detergents powders for household use
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies technical requirements, Quality requirements, Marking, methods of sampling and test
for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. - Reference of the measure
- US EAS 412-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- plain steel bars to be used as reinforcement in concrete
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 127-2:2014, Synthetic detergent powders — Specification — Part 2: Machine wash
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packaging and marking, and methods of sampling and test for synthetic detergents for machine wash. It does not cover hand wash powders and industrial detergent powders.
- Reference of the measure
- US EAS 127-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- synthetic detergents for machine wash
Countries/Regions affected by the measure.
-
Applied by Uganda on the entire world
The measure came into effect on 12 October 2009
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 12 October 2009
- Publication where the measure is specified
- Statutory Instruments No. 56 of 2009
- Regulation where the measure is specified
- The Petroleum (Marking and Quality Control) Regulations, 2009
- Country/Region applying the measure
- Uganda
- Coded list of objectives
- E: Protection of the environment and X: For purposes n.e.s.
- Description of the measure
- 4. Marking of petroleum products
(1) A petroleum product to be sold in Uganda shall be marked with a marker approved by the Minister by notice in the Gazette.
(2) The importer or marketer shall present the petroleum product for marking to the marking agent appointed by the Commissioner.
(3) Marking of a petroleum product shall be done at a custom bonded facility.
(4) A petroleum product shall not be released from a custom bonded facility unless it has been marked. - Reference of the measure
- Regulation 4 (1-4)
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Petroleum products
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 31: 2013, Laundry soap — Specification (2nd Edition
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, packaging, marking, sampling and test methods for two grades of laundry soaps. This standard covers two grades of laundry soap pure and built laundry soap in the form of cakes, tablets or bars, produced from vegetable or animal oils or fats or a blend of all or part to these materials. It does not cover liquid soap for household purposes, and bar soap, in which synthetic detergents have been added to enhance its performance. (This Uganda Standard cancels and replaces US EAS 31:2011, Laundry soap — Specification, which has been technically revised).
- Reference of the measure
- US EAS 31: 2013,
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- laundry soap
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 786: 2013, Skin care creams, lotions and gels — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, packing, marking and methods of sampling and test for creams, lotions and gels for skin care. This standard does not apply to skin care products, for which therapeutic claims are made and also does not apply to non-emulsified lotions and gels. (This Uganda Standard cancels and replaces US 339:2006, Specification for creams, lotions and gels for skin care, which has been technically revised and republished).
- Reference of the measure
- US EAS 786: 2013,
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- reams, lotions and gels for skin care.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 461: 2013, Hair dyes — Part 1: Aryl diamine based formulated powders — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packaging, marking and methods of sampling and test for aryl diamine based formulated powder hair dyes. This standard only covers permanent powder hair dyes based on aryl di-amines which act as primary intermediates in dyes. It does not apply to vegetable-based hair dyes, metallic-based hair dyes and liquid hair dye. (This Uganda Standard cancels and replaces US 489:2003, Formulated powder, hair dyes, aryl diamine based — Specification, which has been technically revised and republished).
- Reference of the measure
- US EAS 461: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- aryl diamine based formulated powder hair dyes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 342: 2013, Pomades and solid brilliantines — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- this Uganda Standard specifies requirements and methods of sampling and test for pomades and solid brilliantines for general use. It applies to pomades and solid brilliantines which are either vegetable oil or petroleum based but excludes oil emulsions. This standard does not cover liquid brilliantines.
- Reference of the measure
- US EAS 342: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pomades and solid brilliantines
Countries/Regions affected by the measure.
-
Applied by Uganda on the entire world
The measure came into effect on 24 November 2011
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 24 November 2011
- Publication where the measure is specified
- Statutory Instruments No.4of 2012
- Regulation where the measure is specified
- Atomic Energy Regulations, 2012
- Country/Region applying the measure
- Uganda
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- 97. Marking.
(1) Where unpackaged LSA-I or SCO-I material is contained in receptacles or packing material and shipped under conditions specified in regulation 91, the outer surface of these receptacles or wrapping materials shall bear the marking “RADIOACTIVE LSA-I” or “RADIOACTIVE SCO-I” as appropriate.
(2) All packages shall be legibly and durably marked on the outside of the packaging with the identification of either the consignor or consignee, or both.
(3) Each package of gross mass exceeding 50 kg shall have its permissible gross mass legibly and durably marked on the outside of the packaging.
(4) All packages shall be legibly and durably marked on the outside of the packaging with the appropriate United Nations number specified in Table 4, Schedule 11 preceded by the letters “UN” and for each
package, other than excepted packages, the proper shipping name as specified in Table 4, Schedule 11 shall also be included with the marking.
(5) Industrial packages shall be legibly and durably marked on the outside of the packaging with the words “TYPE IP- 1”, “TYPE IP-2” or “TYPE IP-3”.
(6) Type A packages shall be legibly and durably marked on the outside of the packaging with the words “TYPE A”.
(7) Each package which conforms to an approved Type B(U), Type B(M) or Type C package design shall be legibly and durably marked on the outside of the packaging with—
(a) the identification mark allocated by the Council to the design of that package;
(b) a serial number to uniquely identify each packaging which conforms to that design; and
(c) in the case of a Type B(U) or Type B(M) package design, with “TYPE B(U)” or “TYPE B(M)”.
(8) In the case of a Type C package design, with the words “TYPE C” in addition, each package which conforms to a Type B(U), Type B(M) or Type C package design shall have the outside of the outermost receptacle which is resistant to the effects of fire and water plainly marked by embossing, stamping or other means resistant to the effects of
fire and water with the trefoil symbol for radioactive material specified in Figure 1, Schedule 7. - Reference of the measure
- Part XII Regulation 97 ; Figure 1, Schedule 7
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Radioactive Material
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 341: 2013, Nail polish removers — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packing , marking and methods of sampling and test for nail polish removers used for cosmetic purposes. (This Uganda Standard cancels and replaces US 486:2003, Nail polish removers — Specification — Part 1: Organic solvent based, which has been technically revised and republished).
- Reference of the measure
- US EAS 341: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- nail polish removers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1042:2013, Alcoholometers and alcohol hydrometer; and thermometers for use in alcoholometry— Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standards specifies the requirements and marking for alcoholometers and alcohol hydrometers used for the determination of the alcoholic strength of mixtures of water and ethanol, and to thermometers for use in alcoholometry. It sets out technical and metrological specifications for these instruments, in accordance with International Alcoholometric Tables. This standard covers glass hydrometers indicating percentage alcoholic strength by mass, referred to as mass alcoholometers, glass hydrometers indicating percentage alcoholic strength by volume, referred to as volume alcoholometers, and glass hydrometers indicating density in kilogram per cubic metre, referred to as alcohol hydrometers.
- Reference of the measure
- US 1042:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- alcoholometers and alcohol hydrometers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1039:2013, Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and marking for speedometers, mechanical odometers and chronotachographs for motor vehicles.
- Reference of the measure
- US 1039:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- speedometers, mechanical odometers and chronotachographs for motor vehicles.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 340: 2013, Nail polish — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packaging and marking and methods of test for nail polishes used for cosmetic purposes.
- Reference of the measure
- US EAS 340: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- nail polishes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 12 April 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 17 of 12th April 2013
- Regulation where the measure is specified
- US 970-2:2012, Agglomerated stone-slabs and cut-to-size product — Part 2: Product requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies marking requirements for slabs and cut-to-size product of agglomerated stone which are made for use as vanity, kitchen tops and other similar uses in furnishing and modular tiles of agglomerated stone which are made for use as flooring and stairs for internal and external uses, fixed by mortar or adhesives.
- Reference of the measure
- US 970-2:2012,
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Agglomerated stone-slabs and cut-to-size product
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1025:2013, Moisture meters for cereal grain and oilseeds — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and marking for moisture meters for cereal grains and oilseeds, that is to say instruments measuring and indicating, either directly or by means of conversion tables and (or) correction tables, the moisture content of cereal grains and the moisture and volatile matter content of oilseeds. This standard applies only to moisture meters used for measurements on statistical samples.
- Reference of the measure
- US 1025:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- moisture meters for cereal grains and oilseeds
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61702: 1995, Rating of direct coupled photovoltaic (PV) pumping systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard defines predicted short-term characteristics (instantaneous and for a typical daily period) and marking of direct coupled photovoltaic (PV) water pumping systems. It also defines minimum actual performance values to be obtained on-site. It does not address PV pumping systems with batteries.
- Reference of the measure
- US IEC 61702: 1995
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- direct coupled photovoltaic (PV) water pumping systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 339: 2013, Hair creams, lotions and gels — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, packing, marking and methods of sampling and test for hair creams, lotions and gels based on vegetable oil or mineral oil, or any combination of the above, with fatty acids or fatty acid emulsions. It also applies to hair conditioners and setting lotions. This standard does not cover hair sprays, hair sheens or hair oils including hair creams, lotions and gels for which therapeutic claims are made.
- Reference of the measure
- US EAS 339: 2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- hair creams, lotions and gels based on vegetable oil or mineral oil, or any combination of the above, with fatty acids or fatty acid emulsions. It also applies to hair conditioners and setting lotions.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B32: Marking requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61646: 2008, Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down requirements and markings for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by US IEC 61215. (This Uganda Standard cancels and replaces US 553:2005, Thin film terrestrial PV (PV) modules – design qualification and type approval, which has been republished).
- Reference of the measure
- US IEC 61646: 2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates
Countries/Regions affected by the measure.
B32: Marking requirements
