English
FrançaisNon-tariff Measures
Showing items 4441 to 4460 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-3:2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases.
- Reference of the measure
- US ISO 9809-3:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US 983:2015, Banana (matooke) flour – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for banana (matooke) flour.
- Reference of the measure
- US 983:2015,
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Banana (matooke) flour
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 264-1966 (Revision in 2013), Standard for Danbo
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Danbo intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 264-1966
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Danbo
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-4:2014, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations, and tests at manufacture of refillable seamless stainless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied, and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
- Reference of the measure
- US ISO 9809-4:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 265-1966 (Revision in 2013), Standard for Edam
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Edam intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 265-1966
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Edam
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US 980:2013, Herbal tea – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, food additives, contaminants, hygiene, packaging, labelling,methods of sampling and test of herbal tea.
- Reference of the measure
- US 980:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- herbal tea
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 266-1966 (Revision in 2013), Standard for Gouda
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Gouda intended for direct consumption or for further procesing.
- Reference of the measure
- US CODEX STAN 266-1966
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gouda
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 11114-1:2012, Gas cylinders — Compatibility of cylinders and valve materials with gas contents — Part 1: Metallic materials
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content. The compatibility data given is related to single gases and to gas mixtures. Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, liquefied and dissolved gases, are considered.
- Reference of the measure
- US ISO 11114-1:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 267-1966 (Revision in 2013), Standard for Havarti
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Havarti intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 267-1966
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Havarti
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 11118:1999, Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved gases exposed to extreme worldwide ambient temperatures.
- Reference of the measure
- US ISO 11118:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 11:2013, Galvanized plain and corrugated steel sheets — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and methods of sampling and test for galvanized plain and corrugated steel sheets for roofing, cladding, fencing, fabrication and general use. This standard does not cover special purpose profiles. (This Uganda Standard cancels and replaces US 301:2006, Specification for galvanized plain and corrugated iron sheets, which has been technically revised and republished).
- Reference of the measure
- US EAS 11:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- galvanized plain and corrugated steel sheets for roofing, cladding, fencing, fabrication and general use
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 268-1966 (Revision in 2013), Standard for Samsø
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Samsø intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 268-1966
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Samsø
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 108:2013, Hot-rolled, heavy-thickness carbon steel sheets, coils and strips — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality.
- Reference of the measure
- US EAS 108:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 269-1967 (Revision in 2013), Standard for Emmental
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Emmental intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 269-1967
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Emmental
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 134:2013, Cold rolled steel sections — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and sectional properties of cold rolled steel sections of thickness up to 8 mm for use in structural applications. (This Uganda Standard cancels and replaces US EAS 134:1999, Cold rolled steel sections – Specification, which has been technically revised).
- Reference of the measure
- US EAS 134:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cold rolled steel sections of thickness up to 8 mm for use in structural applications
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 270-1968 (Revision in 2013), Standard for Tilsiter
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Standard applies to Tilsiter intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 270-1968
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Tilsiter
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 196:2013, High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for steel sheet in coils and cut lengths. It applies to the carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet. This standard is not applicable to hot-rolled, heavy-thickness carbon sheet coils. In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of the general specification. For the purposes of determining conformance with this specification and the various material specifications, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values.
- Reference of the measure
- US EAS 196:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- steel sheet in coils and cut lengths, carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 271-1968 (Revision in 2013), Standard for Saint-Paulin
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Saint-Paulin intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 271-1968
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Saint-Paulin
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies technical requirements for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. (This Uganda Standard cancels and replaces US 155-1:2003, Specification for steel bars for reinforcement of concrete — Plain bars, which has been technically revised and republished).
- Reference of the measure
- US EAS 412-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Plain bars to be used as reinforcement in concrete. Plain bars intended for Welding types: B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 272-1968 (Revision in 2013), Standard for Provolone
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to Provolone intended for direct consumption or for further processing.
- Reference of the measure
- US CODEX STAN 272-1968
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Provolone
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
