English
FrançaisNon-tariff Measures
Showing items 4801 to 4820 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US 1541:2013, Chocolate and chocolate products – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, food additives, contaminants, hygiene, packaging, labelling,methods of sampling and test for chocolate and chocolate products intended for human consumption. This standard does not apply to products in which chocolate is used as an enhancer.
- Reference of the measure
- US 1541:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- chocolate and chocolate products
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61646: 2008, Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down requirements and markings for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by US IEC 61215. (This Uganda Standard cancels and replaces US 553:2005, Thin film terrestrial PV (PV) modules – design qualification and type approval, which has been republished).
- Reference of the measure
- US IEC 61646: 2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 11:2013, Galvanized plain and corrugated steel sheets — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and methods of sampling and test for galvanized plain and corrugated steel sheets for roofing, cladding, fencing, fabrication and general use. This standard does not cover special purpose profiles.
- Reference of the measure
- US EAS 11:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- galvanized plain and corrugated steel sheets
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61702: 1995, Rating of direct coupled photovoltaic (PV) pumping systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard defines predicted short-term characteristics (instantaneous and for a typical daily period) and marking of direct coupled photovoltaic (PV) water pumping systems. It also defines minimum actual performance values to be obtained on-site. It does not address PV pumping systems with batteries.
- Reference of the measure
- US IEC 61702
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- direct coupled photovoltaic (PV) water pumping systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 985:2014, Apple — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to fruits of commercial varieties (cultivars) of apples grown from Malus domestica Borkh, of the Rosaceae family, to be supplied fresh to the consumer, after preparation and packaging. Apples for industrial processing are excluded.
- Reference of the measure
- US 985:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Apples
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 108:2013, Hot-rolled, heavy-thickness carbon steel sheets, coils and strips — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality.
- Reference of the measure
- US EAS 108:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- hot-rolled, heavy-thickness carbon steel sheets, coils and strips
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1022-1:2013, Material measures of length for general use — Part 1: Metrological and technical requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to material measures of length for general use, hereinafter called “measures”. This standard specifies the technical, metrological and administrative conditions which are mandatory for these measures. It also includes the requirements for digital readouts on the cases of tapes, whether electronic or mechanical. This standard does not apply to high-precision measures used by industry in the field of mechanics or in geodesy (for example: gauge blocks, geodetic wires and precision line measures). It also does not address safety aspects, for example the use of material measures with electronic devices in hazardous areas. Guidelines for these aspects should be followed in accordance with the applicable international, regional or national regulations or other standards.
- Reference of the measure
- US 1022-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Material measures of length
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 997:2014, Cooking banana (matooke) — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda standard specifies requirements for cooking banana (matooke) grown from Musa spp. (AAA-EAH) and of family Musaceae to be supplied raw to the consumer.
- Reference of the measure
- US 997:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Banana (matooke)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 134:2013, Cold rolled steel sections — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and sectional properties of cold rolled steel sections of thickness up to 8 mm for use in structural applications.
- Reference of the measure
- US EAS 134:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cold rolled steel sections
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1025:2013, Moisture meters for cereal grain and oilseeds — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and marking for moisture meters for cereal grains and oilseeds, that is to say instruments measuring and indicating, either directly or by means of conversion tables and (or) correction tables, the moisture content of cereal grains and the moisture and volatile matter content of oilseeds. This standard applies only to moisture meters used for measurements on statistical samples.
- Reference of the measure
- US 1025:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- moisture meters for cereal grains and oilseeds,
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 196:2013, High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for steel sheet in coils and cut lengths. It applies to the carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet. This standard is not applicable to hot-rolled, heavy-thickness carbon sheet coils. In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of the general specification. For the purposes of determining conformance with this specification and the various material specifications, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values.
- Reference of the measure
- US EAS 196:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies technical requirements, Quality requirements, Marking, methods of sampling and test
for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. - Reference of the measure
- US EAS 412-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- plain bars to be used as reinforcement in concrete
Countries/Regions affected by the measure.
-
Applied by Uganda on the entire world
The measure came into effect on 28 March 2014
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 28 March 2014
- Publication where the measure is specified
- Statutory Instruments 2014, No. 34
- Regulation where the measure is specified
- The National Drug Policy And Authority (Importation And Exportation of Drugs) Regulations, 2014.
- Country/Region applying the measure
- Uganda
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- 14 (2) The quality of the drug imported for donation shall conform to the authorised pharmacopoeias and the presentation, strength and formulation of the drug shall as far as possible, be similar to the drug which is commonly used in Uganda.
- Reference of the measure
- Part III regulation 14 (2)
- Measure also domestic
- No
Products affected by the measure.
- Description
- Drugs
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use.
- Reference of the measure
- US EAS 468:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pre-painted hot-dip metal-coated steel sheets and coils for exterior use
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1039:2013, Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and marking for speedometers, mechanical odometers and chronotachographs for motor vehicles.
- Reference of the measure
- US 1039:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- speedometers, mechanical odometers and chronotachographs for motor vehicles.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 998:2014, Plantain (gonja) — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda standard specifies requirements for plantain (gonja) (AAB genome) banana grown from Musa spp. (AAA-B) and of family Musaceae.
- Reference of the measure
- US 998:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- plantain (gonja)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 783:2013, Stainless steel tanks ― Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies material, dimensional, and constructional requirements for stainless steel tanks.
- Reference of the measure
- US EAS 783:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- stainless steel tanks
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1042:2013, Alcoholometers and alcohol hydrometer; and thermometers for use in alcoholometry— Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standards specifies the requirements and marking for alcoholometers and alcohol hydrometers used for the determination of the alcoholic strength of mixtures of water and ethanol, and to thermometers for use in alcoholometry. It sets out technical and metrological specifications for these instruments, in accordance with International Alcoholometric Tables. This standard covers glass hydrometers indicating percentage alcoholic strength by mass, referred to as mass alcoholometers, glass hydrometers indicating percentage alcoholic strength by volume, referred to as volume alcoholometers, and glass hydrometers indicating density in kilogram per cubic metre, referred to as alcohol hydrometers.
- Reference of the measure
- US 1042:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- alcoholometers and alcohol hydrometers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 6079:1990, Instant tea in solid form — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for instant tea in solid form. It does not apply to: instant tea containing non-tea carbohydrates as bulking/filling agents (normally referred to as "filled instant tea"); preparations of instant tea containing added aromatic material unless these are derived exclusively from the plant Camellia sinensis; and decaffeinated instant tea.
- Reference of the measure
- US ISO 6079:1990
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- instant tea
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US 1560:2013, Rotational moulded polyethylene water storage tank — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and methods of sampling and test for rotational moulded polyethylene water storage tanks (closed and open top tank). This standard is not applicable to underground tanks and mobile water tanks and horizontal cylindrical water tanks
- Reference of the measure
- US 1560:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- rotational moulded polyethylene water storage tanks
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
