Non-Tariff Barriers

Non-Tariff Measure

NTM classification

B82: Testing requirement 

Date when the measure came into force

19 January 2011 

Publication where the measure is specified

Government Gazette No.33763, 19 November 2010 

Regulation where the measure is specified

Amendment To The Compulsory Specification For Motor Vehicles Of Category N1 

Country/Region applying the measure

South Africa 

The rationale of the measure

1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. 

Coded list of objectives

X: For purposes n.e.s. 

Description of the measure

4.2.4 Ongoing Conformity of Production
Each model of motor vehicle shall be tested in accordance with a Type 1 test as defined in clause 5.3.1 of SABS ECE R83 every 12 months. One sample of each engine generation type shall be taken, representing the worst case scenario of that particular model. Each model shall meet with the compliance limits given in 8.2.1.1.1.1 and 8.2.1.1.1.2.
If the sample taken does not meet with the compliance limits given in 8.2.1.1.1.1 and 8.2.1.1.1.2, then two further samples of the same model shall be subjected to the same test. The arithmetical mean of the results of the three samples taken shall determine compliance. 

Reference of the measure

Regulation 4.2.4 

Measure also domestic

Yes 

Products affected by the measure.

Description

Motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods. 

Countries/Regions affected by the measure.

Description

All countries