English
FrançaisRegulations
Page 11 of 140, showing 20 records out of 2786 total, starting on record 201, ending on 220
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| Value Added Tax Act | An Act to provide for the imposition and collection of Value Added Tax; and to provide for matters relating to or incidental to Value Added Tax | 2005-08-12 | Malawi Revenue Authority | Value Added Tax Act | 14 December 2015 |
| Value Added Tax (Unbeneficiated Hides Exports) Regulations, 2017 | Hard copy documents with amendments on VAT regulation for unbeneficiated hides exports | 2017-01-13 | Ministry on Finance and Economic Development | Statutory Instrument 12 of 2017 | 30 October 2017 |
| US US IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long term operation in general open air climates, as defined in IEC 60721-2-1 | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 4869-5:2013, Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects | This Uganda Standard specifies a method for measuring noise reduction of passive hearing protectors at the threshold of hearing. The method is designed to provide estimates of the noise reduction obtained by typical groups of users in real-world occupational settings, who may lack the training and motivation to wear hearing protectors in an optimum manner. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-8:2013, Respiratory protective devices — Human factors — Part 8: Ergonomic factors | This Uganda Standard gives guidance on the generic ergonomic factors for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). It specifies principles relating to: the biomechanical interaction between RPD and the human body; the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-7:2013, Respiratory protective devices — Human factors — Part 7: Hearing and speech | This Uganda Standard contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-6:2014, Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects | This Uganda Standard provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD. It specifies for the writers of RPD standards, principles relating to the interaction between RPD and the human physiological and psychological perception, the acceptance by the wearer, and the need for training to improve acceptance of the RPD by the wearer. This standard does not cover requirements related to the specific hazard for which the RPD is designed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-5:2013, Respiratory protective devices — Human factors — Part 5: Thermal effects | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. It contains information related to thermal effects of respiratory protective devices on the human body, in particular: temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; thermal effects of breathing gas temperatures on lung airways and tissues; effects of breathing gas temperature and humidity on respiratory heat exchange; effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women aged between 20 and 60 years. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-4:2012, Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance: Physiologically based limits | This Uganda Standard describes how to calculate the work performed by a person's respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except diving equipment. This standard describes how much additional impediment people can tolerate and contains values that can be used to judge the acceptability of an RPD. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-3:2011, Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment | This Uganda Standard gives: a description of the factors contributing to the present content of the Earth's atmosphere; a description of the physiology of human respiration; a survey of the current biomedical literature on the effects of carbon dioxide and oxygen on human physiology; examples of environmental circumstances where the partial pressure of oxygen or carbon dioxide can vary from that found at sea level. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-2:2015, Respiratory protective devices — Human factors — Part 2: Anthropometrics | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for: anthropometric measurement methods; anthropometric data for head, face, and neck dimensions; anthropometric data for torso dimensions; human test panels; models of headforms | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-1:2015, Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of US ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: metabolic rates associated with various intensities of work; oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16901:2015, Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | This Uganda Standard provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO/TS 16530-2:2014, Well integrity — Part 2: Well integrity for the operational phase | This Uganda Standard provides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 9994: 2005 Lighters — Safety specification/ US ISO 9994: 2005/Amd.1: 2008, Lighters — Safety specification | This standard establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes. The safety specification given in this standard cannot eliminate all hazards, but is intended to reduce potential hazards to users. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-4:2014, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa | This Uganda Standard specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations, and tests at manufacture of refillable seamless stainless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied, and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum actual tensile strength, Rma, of less than 1 100 MPa. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-3:2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-2:2010, Gas cylinders — Refillable seamless steel gas cylinders —Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum tensile strength Rma ≥ 1 100 MPa. It is not applicable to cylinders with Rma, max >1 300 MPa for diameters >140 mm and guaranteed wall thicknesses a’ ≥ 12 mm and Rma, max >1 400 MPa for diameters ≤ 140 mm and guaranteed wall thicknesses a’ ≥ 6 mm, because beyond these limits, additional requirements can apply. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9809-1: 2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This standard is applicable to cylinders with a maximum actual tensile strength Rma of less than 1 100 MPa. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 973:1999, Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground – Specification | This Uganda Standard specifies requirements for pimento or allspice [Pimentadioica (L.) Merr.], whole or ground. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
