English
FrançaisRegulations
Page 118 of 140, showing 20 records out of 2786 total, starting on record 2341, ending on 2360
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US 739:2012, Sausages — Specification | This Uganda Standard specifies requirements and methods of sampling and test for sausages intended for use as food or as an ingredient in other foods. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US 931:2012, Minced meat — Specification | This Uganda Standard specifies requirements and methods of sampling and test for minced meat intended for use as food or as an ingredient in foods | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US 932:2012, Bovine (beef) carcasses and cuts — Specification | This Uganda Standard specifies requirements for bovine (beef) carcasses and cuts meant for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US 919:2012, Dried silver cyprinid (Mukene) — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for dried whole silver cyprinid (Mukene) for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US EAS 43:2012, Bread — Specification/ Corrigendum 1 2013-09-30 | This Uganda Standard specifies the requirements and methods of sampling and test for bread intended for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US EAS 772:2012, Dried sweet potato chips — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for dried sweetpotato chips intended for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US EAS 781:2012, Biscuits — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for biscuits intended for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US EAS 782:2012, Composite flour – Specification | This Uganda Standard specifies requirements and methods of sampling and test for composite flour intended for human consumption. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US ISO 4642-1:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter. Hoses conforming to this part of US ISO 4642 are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works. This part of US ISO 4642 applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 4642-2:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). This part of US ISO 4642 applies to delivery hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5359:2008, Low-pressure hose assemblies for use with medical gases | This Uganda Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen; nitrous oxide; medical air; helium; carbon dioxide; xenon; specified mixtures of the gases listed above; oxygen-enriched air; air for driving surgical tools; nitrogen for driving surgical tools; vacuum. It is intended in particular to ensure gas-specificity and to prevent cross-connection between systems conveying different gases. These hose assemblies are intended for use at maximum operating pressures of less than 1 400 kPa. This standard specifies the allocation of (NIST), (DISS), (SIS) connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors. This standard does not specify:requirements for coaxial hoses used for the supply and disposal of air for driving surgical tools; andrequirements for electrical conductivity.This standard does not specify the intended uses of hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5771:2008, Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification | This Uganda Standard specifies the minimum requirements for rubber hoses used for transferring ammonia, in liquid or in gaseous form, at ambient temperatures from −40 °C up to and including +55 °C. It does not include specifications for end fittings, but is limited to the performance of the hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5772:1998, Rubber hoses and hose assemblies for measured fuel dispensing — Specification | This Uganda Standard specifies the requirements for three types of rubber hose and hose assembly used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15 % oxygenated compounds). The three types of hose are as follows:type 1: hoses with textile reinforcement suitable for reeling on a drum or hanging in bends;type 2: hoses with textile and helical wire reinforcement designed for torsional flexibility, suitable for coiling, reeling on a drum or hanging in bends; and type 3: hoses with fine wire reinforcement designed for low dilation, suitable for reeling on a drum or hanging in bends. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5774:2006 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification | This Uganda Standard specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from − 10 °C to + 60 °C. The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6134:2005, Rubber hoses and hose assemblies for saturated steam — Specification | This Uganda Standard specifies requirements for two types of hoses and hose assemblies, low pressure with a maximum working pressure of 6 bar and high pressure with a maximum working pressure of 18 bar, made of rubber and hose fittings made of metal, designed to convey saturated steam and hot water condensate. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification | This Uganda Standard specifies the requirements for general-purpose textile reinforced thermoplastics water-discharge hoses. Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:ambient temperatures: −10 °C to +60 °C; and water temperature during operation: 0 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6804:2009, Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification | This Uganda Standard specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).It is applicable to the following types of hose: Type 1: rubber hoses for unheated water supply (maximum temperature 70 °C).Type 2: rubber hoses for heated water supply (maximum temperature 90 °C).Type 3: plastics hoses for unheated water supply (maximum temperature 60 °C). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6807:2003, Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification | This Uganda Standard specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This standard applies to hoses which are suitable for use at ambient temperatures between − 20 °C and + 52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This standard does not apply to hoses which are intended for use with gases.. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 8028:1999, Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification | This Uganda Standard specifies the requirements for four types, differentiated by burst pressure and temperature of use, of elastomeric hose and hose assembly for use in airless paint spraying. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 8029:2007, — General-purpose collapsible water hose, textile reinforced — Specification | This Uganda Standard specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of−10 °C to +55 °C. Such hoses are classified into four types, as follows:low pressure, designed for a maximum working pressure of up to 4,0 bar at 23 °C and up to 2,0 bar at 55 °C;medium pressure, for a maximum working pressure of up to 7,0 bar at 23 °C and up to 3,6 bar at 55 °C;high pressure, for a maximum working pressure of up to 10,0 bar at 23 °C and up to 5,1 bar at 55 °C; andextra-high pressure, for a maximum working pressure of up to 15,5 bar at 23 °C and up to 7,9 bar at 55 °C.This standard does not apply to products used for fire-fighting or the conveyance of drinking water | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
