English
FrançaisRegulations
Page 15 of 140, showing 20 records out of 2786 total, starting on record 281, ending on 300
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6807:2003, Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification | This Uganda Standard specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This standard applies to hoses which are suitable for use at ambient temperatures between − 20 °C and + 52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This standard does not apply to hoses which are intended for use with gases.. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6804:2009, Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification | This Uganda Standard specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).It is applicable to the following types of hose: Type 1: rubber hoses for unheated water supply (maximum temperature 70 °C).Type 2: rubber hoses for heated water supply (maximum temperature 90 °C).Type 3: plastics hoses for unheated water supply (maximum temperature 60 °C). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6742-5:2015, Cycles — Lighting and retroreflective devices — Part 5: Lighting systems not powered by the cycle’s movement | systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems not powered by the cycle’s movement. It applies to light devices complying with ISO 6742-1. Lighting systems include lighting devices and power not supplied by cycle’s movement such as battery. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 10 August 2016 |
| US ISO 6742-4:2015, Cycles — Lighting and retroreflective devices — Part 4: Lighting systems powered by the cycle’s movement | This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems powered by the cycle’s movement. It applies to light devices complying with US ISO 6742-1. Lighting systems include lighting devices and power supplied by cycle's movement such as generator. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 10 August 2016 |
| US ISO 6742-3:2015, Cycles — Lighting and retroreflective devices — Part 3:Installation and use of lighting and retro-reflective devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-2:2015, Cycles — Lighting and retroreflective devices — Part 2:Retroreflective devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 669:2000, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements | This Uganda Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete movable welding equipment. The following types are included: • single-phase equipment with alternating welding current; • single-phase equipment with rectified welding current by rectification of the output of the welding transformer; • single-phase equipment with inverter welding transformer; • three-phase equipment with rectified welding current by rectification of the output of the welding transformer; • three-phase equipment with a current rectification in the input of the welding transformer (sometimes called frequency convertor); and • three-phase equipment with inverter welding transformers. This standard applies neither to welding transformers sold separately nor to safety requirements | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6699:1990, Cycles — Stern and handlebar bend — Assembly dimensions | This Uganda Standard specifies the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend of a bicycle. lt applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. lt does not apply to specialized types of bicycle such as tradesmen’s delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6698:1989, Cycles — Screw threads used to assemble freewheels on bicycle hubs | This Uganda Standard specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. It is based on the use of the ISO basic thread profile given in ISO 68; satisfactory interchangeability with the corresponding British Standard Cycle (B.S.C.) thread; this has required the use of an inch pitch (t.p.i.);the use of screw thread tolerance grades and tolerance positions given in ISO 965-l1; and the use of gauges made to ISO 1502. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6539:2014, Cinnamon (Cinnamomum zeylanicum Blume) – Specification (2nd Edition) | This Uganda Standard specifies requirements for whole or ground (powdered) cinnamon, of the Sri Lankan, Madagascan and Seychelles types obtained from the bark of the tree or shrub Cinnamomum zeylanicum Blume. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6465:2009, Spices – Cumin (Cuminum cyminum L.) – Specification (2nd Edition) | This Uganda Standard specifies requirements for fruits of cumin (Cuminum cyminum L.) | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6425:1996, Divers’ watches | This Uganda Standard specifies requirements and test methods for divers’ watches and for divers’ watches for use in deep diving. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6362-7:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | 03 September 2016 | |
| US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of the following: • wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; • wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products. | 2016-08-12 | National Forest Authority | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
