English
FrançaisRegulations
Page 29 of 140, showing 20 records out of 2786 total, starting on record 561, ending on 580
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 14998:2013, Petroleum and natural gas industries — Downhole equipment — Completion accessories | This Uganda Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This Uganda Standard provides requirements for the functional specification and technical specifications including: design, design verification and validation, materials, documentation and data control, redress, repair, shipment, and storage. This standard covers the pressure containing, load bearing, disconnect/reconnect, tubing movement, and opening a port functionalities of completion accessories. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 22846-2:2012, Personal equipment for protection against falls — Rope access systems — Part 2: Code of practice | This Uganda Standard provides recommendations and guidance on the use of rope access methods for work at height and expands on the fundamental principles given in ISO 22846-1, in conjunction with which it is intended to be used. It is intended for use by employers, employees and self-employed persons who use rope access methods, by those commissioning rope access works and by rope access associations. This part of US ISO 22846 is applicable to the use of rope access methods in any situation where ropes are used as the primary means of access, egress or support and as the primary means of protection against a fall, on both man-made and natural features. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers | This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 17078-4:2010, Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment | This Uganda Standard provides informative documentation to assist the user/purchaser and the supplier/manufacturer in specification, design, selection, testing, calibration, reconditioning, installation and use of side-pocket mandrels, flow-control devices and associated latches and installation tools. The product design and manufacturing-related requirements for these products are included within the other parts of US ISO 17078. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO/TS 16976-6:2014, Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects | This Uganda Standard provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD. It specifies for the writers of RPD standards, principles relating to the interaction between RPD and the human physiological and psychological perception, the acceptance by the wearer, and the need for training to improve acceptance of the RPD by the wearer. This standard does not cover requirements related to the specific hazard for which the RPD is designed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-1:2015, Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of US ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: metabolic rates associated with various intensities of work; oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-2:2015, Respiratory protective devices — Human factors — Part 2: Anthropometrics | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for: anthropometric measurement methods; anthropometric data for head, face, and neck dimensions; anthropometric data for torso dimensions; human test panels; models of headforms | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-5:2013, Respiratory protective devices — Human factors — Part 5: Thermal effects | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. It contains information related to thermal effects of respiratory protective devices on the human body, in particular: temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; thermal effects of breathing gas temperatures on lung airways and tissues; effects of breathing gas temperature and humidity on respiratory heat exchange; effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women aged between 20 and 60 years. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 15663-3:2001, Petroleum and natural gas industries —Life-cycle costing —Part 3: Implementation guidelines | This Uganda Standard provides guidelines for the implementation of life-cycle costing for the development and operation of the facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 is applicable when making decisions on any option which has cost implications for more than one cost element or project phase. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 17348:2016, Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment | This Uganda Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this standard. This standard only considers materials compatibility with the environment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 13879:2015, Petroleum and natural gas industries — Content and drafting of a functional specification | This Uganda Standard provides guidance on the content and drafting of a functional specification. A functional specification may not be necessary if a user/purchaser wishes to obtain a known standard product, process or service manufactured/supplied to a recognized standard. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15663-2:2001, Petroleum and natural gas industries —Life-cycle costing —Part 2:Guidance on application of methodology and calculation methods | This Uganda Standard provides guidance on application of the methodology for life-cycle costing for the development and operation of facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 also provides guidance on the application and calculations of the life-cycle costing process defined in US ISO 15663-1. This part of US ISO 15663 is not concerned with determining the life-cycle cost of individual items of equipment, but rather with life-cycle costing in order to estimate the cost differences between competing project options. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 13880:1999, Petroleum and natural gas industries —Content and drafting of a technical specification | This Uganda Standard provides guidance for the content and drafting of a technical specification in order to ensure that all technical requirements of a product, process or service are included and can be verified as complying with specified performance requirements, such as may be specified in a functional specification (see US ISO 13879). | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 14693:2003, Petroleum and natural gas industries — Drilling and wellservicing equipment | This Uganda Standard provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of this standard | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 10427-2:2004, Petroleum and natural gas industries — Equipment for well cementing — Part 2: Centralizer placement and stop-collar testing | This Uganda Standard provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 24505:2016, Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision | This Uganda Standard provides a method for creating conspicuous colour combinations for use in visual signs and displays taking into account viewer age. It is based on the perceived similarity of colours at photopic and mesopic lighting conditions. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 18788:2015, Management system for private security operations — Requirements with guidance for use | This Uganda Standard provides a framework for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the management of security operations. It provides the principles and requirements for a security operations management system (SOMS). This standard provides a business and risk management framework for organizations conducting or contracting security operations and related activities and functions while demonstrating: a) conduct of professional security operations to meet the requirements of clients and other stakeholders; b) accountability to law and respect for human rights; c) consistency with voluntary commitments to which it subscribes. This standard is applicable to any organization that needs to: a) establish, implement, maintain and improve an SOMS; b) assess its conformity with its stated security operations management policy; c) demonstrate its ability to consistently provide services that meet client needs and are in conformance with applicable laws and human rights requirements. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO/TS 16901:2015, Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | This Uganda Standard provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 20712-1:2008, Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in workplaces and public areas | This Uganda Standard prescribes water safety signs intended for use in connection with the aquatic environment. It is intended for use by owners and operators of aquatic environments and by manufacturers of signs and equipment. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
