English
FrançaisRegulations
Page 33 of 140, showing 20 records out of 2786 total, starting on record 641, ending on 660
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US CODEX STAN 183:1993, Standard for papaya | This Uganda Standard applies to fruits of commercial varieties of papayas grown from Carica papaya L., of the Caricaceae family, to be supplied fresh to the consumer, after preparation and packaging. Papayas for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 13363:2004, Rubber and plastics hoses for marine engine wet-exhaust systems — Specification | This Uganda Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water).The three types are:type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; andtype 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.The two classes are:class A intended for diesel engines; andclass B intended for petrol engines, and for diesel engines with a very high exhaust temperature | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 185:1993, Standard for nopal | This Uganda Standard applies to modified stem of commercial varieties of nopals grown from Opuntia ficus indica, O. tomentosa, O. hyptiacantha, O. robusta, O. inermis, O. ondulata, of the Cactaceae family, to be supplied fresh to the consumer, after preparation and packaging. Nopals for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 14113:2013, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | This Uganda Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C. This standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This standard does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see US ISO 3821 and US ISO 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 186:1993, Standard for prickly pear | This Uganda Standard applies to the fruit of commercial varieties of prickly pears grown from Opuntia ficus indica, O. streptachanthae, and O. lindheimeiri, of the Cactaceae family, to be supplied fresh to the consumer, after preparation and packaging. Prickly pears for industrial processing are excluded | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 14557:2002, Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies | This Uganda Standard gives requirements and test methods for rubber and plastics suction hoses for fire-fighting purposes. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 187:1993, Standard for carambola | This Uganda Standard applies to the fruit of commercial varieties of carambolas grown from Averrhoa carambola L., of the Oxalidaceae family, to be supplied fresh to the consumer, after preparation and packaging. Carambolas for industrial processing are excluded | 2015-04-21 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 15 September 2016 |
| US ISO 15465:2004, Pipework — Stripwound metal hoses and hose assemblies | This Uganda Standard specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum allowable pressures of up to 40 bar. These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 196:1995, Standard for litchi | This Uganda Standard applies to commercial varieties (cultivars) of litchis grown from Litchi chinensis Sonn., of the Sapindaceae family, to be supplied fresh to the consumer, after preparation and packaging. Litchis for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 16438:2012, Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications | This Uganda Standard specifies requirements for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C. It is applicable to irrigation hoses with nominal diameters between 40 mm and 500 mm and working pressures between 0,3 bar (0,03 MPa) and 6 bar (0,6 MPa). This standard is applicable to two types of hose configurations: distributor hose (with outlet connections) and plain hose (without outlet connections). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 204:1997, Standard for mangosteen | This Uganda Standard applies to commercial varieties of mangosteens grown from Garcinia mangostana L., of the Guttiferae family, to be supplied fresh to the consumer, after preparation and packaging. Mangosteens for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 17165-1:2007, Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements | This Uganda Standard specifies requirements for hose assemblies that are manufactured from hoses that conform to US ISO 3949 and to all parts of US ISO 1436, US ISO 3862, US ISO 4079 and US ISO 11237 and hose fittings with elastomeric seals that conform to US ISO 12151-1, US ISO 12151-2, US ISO 12151-3 and ISO 12151-6. This part of US ISO 17165 contains information of the most important criteria for the selection of preferred types of hoses and hose fittings with elastomeric sealing for use in hydraulic fluid power applications. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 213:1999, Standard for limes | This Uganda Standard applies tocommercial varieties of limes grown from Citrus latifolia Tanaka, of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Limes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 23297:2008, Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification | This Uganda Standard specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic hoses and hose assemblies of nominal size from 3,2 to 31,5. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR, and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for grades A and B and −40 °C to +120 °C for grades C and D. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 214:1999, Standard for pummelos (citrus grandi) | This Uganda Standard applies to commercial varieties of pummelos grown from Citrus grandis (L.) Osbeck (syn. C. maxima Merr.), of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Pummelos for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 669:2000, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements | This Uganda Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete movable welding equipment. The following types are included: • single-phase equipment with alternating welding current; • single-phase equipment with rectified welding current by rectification of the output of the welding transformer; • single-phase equipment with inverter welding transformer; • three-phase equipment with rectified welding current by rectification of the output of the welding transformer; • three-phase equipment with a current rectification in the input of the welding transformer (sometimes called frequency convertor); and • three-phase equipment with inverter welding transformers. This standard applies neither to welding transformers sold separately nor to safety requirements | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 215:1999, Standard for guavas | This Uganda Standard applies to commercial varieties of guavas grown from Psidium guajava L., of the Myrtaceae family, to be supplied fresh to the consumer, after preparation and packaging. Guavas for industrial processing are excluded | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 216:1999, Standard for chayotes | This Uganda Standard applies to commercial varieties of chayotes grown from Sechium edule (Jacq.) Sw., of the Cucurbitaceae family, to be supplied fresh to the consumer, after preparation and packaging. Chayotes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
