Regulations

Page 35 of 140, showing 20 records out of 2786 total, starting on record 681, ending on 700

Title Description Implementation date Source Publication Created
US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 7225:2005, Gas cylinders — Precautionary labels This Uganda Standard specifies the design, content (that is, hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this standard.. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-1: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 2 hoop wrapped cylinder or tube with a load-sharing metal liner and composite reinforcement on the cylindrical portion only. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-2: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-3: 2013 Gas cylinders— Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load –sharing metallic or non-metallic liners This Uganda Standard specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard does not address the design, fitting and performance of removable protective sleeves. . 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 14245:2006, Gas cylinders — Specification and testing of LPG cylinder valves — Self closing This Uganda Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US EAS 2:2013, Maize grains – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for maize grains of varieties grown from common maize grains, Zea Mays indentata L., and/or Zea mays indurata L., or their hybrids intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 51:2013, Wheat grains – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for wheat grains of varieties (cultivars) grown from common wheat (Triticum aestivum L.), club wheat (T. compactum Host.), intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 284:2013, Pearl millet grains – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for whole and decorticated pearl millet of the Senegalese varieties (cultivars) “souna” and “sanio” grown from Pennisetum glaucum (L.) R.Br. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 331:2013, Green grams – Specification (2nd Edition) This Uganda Standard specifies requirements and methods of sampling and test for the dry whole grains of the green gram of the cultivar Vigna radiata intended for direct human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 755:2013, Cowpeas – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for dry cowpeas of the varieties (cultivars) grown from Vigna unguiculata Linn.Sync. Vigna sinensis (L.) Hassk. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 756:2013, Pigeon peas – Specification (2nd Edition) This Uganda Standard specifies the requirements, methods of sampling and test for dry pigeon peas of the varieties (cultivars) grown from Cajanus cajan Linn. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 757:2013, Sorghum grains – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for sorghum grains of varieties (cultivars) grown from Sorghum bicolor (L.) Moench intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 758:2013, Finger millet grains – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for finger millet grains of varieties (cultivars) grown from Eleusine coracana (L.) Gaertner intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 759:2013, Dry whole peas – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for dry whole peas of varieties (cultivars) grown from Pisum sativum L. and Pisum sativum var. arvense (L.) Poir. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 760:2013, Lentils – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for shelled whole lentils of varieties (cultivars) grown from Lens culinaris Medic. Syn. Lens esculenta Moench. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 761:2013, Dry split peas – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for dry split peas of varieties (cultivars) grown from Pisum sativum L. and Pisum sativum var. arvense (L.) Poir. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 762:2013, Dry soybeans – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for dry whole soybeans of varieties (cultivars) grown from Glycine max (L.) Merr. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 763:2013, Faba beans – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for faba beans of cultivated varieties (cultivars) grown from Vicia faba L. intended for human consumption. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
US EAS 765:2013, Brown rice – Specification (2nd Edition) This Uganda Standard specifies the requirements and methods of sampling and test for brown rice of the varieties grown from Oryza spp., intended for human consumption or for processing to milled rice. 2014-01-27 The Uganda National Bureau of standards THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 02 November 2016
1 2 3...33 34 35 36 37...138 139 140