English
FrançaisRegulations
Page 38 of 140, showing 20 records out of 2786 total, starting on record 741, ending on 760
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 7240-11:2011, Fire detection and alarm systems — Part 11: Manual call points | This Uganda Standard specifies the requirements; test methods and performance criteria for manual call points in fire detection and alarm systems in and around buildings (see US ISO 7240-1). It takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A “direct operation” and type B “indirect operation”, and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location. This standard does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests than those given in this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 7240-12:2006, Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam | This Uganda Standard specifies requirements, test methods and performance criteria for line-type smoke detectors for use in fire detection systems installed in buildings. The detectors consist of at least a transmitter and a receiver and can include reflector(s), for the detection of smoke by the attenuation and/or changes in attenuation of an optical beam. This standard does not coverline-type smoke detectors designed to operate with separations between opposed components of less than 1 m;line-type smoke detectors whose optical path length is defined or adjusted by an integral mechanical connection; andline-type smoke detectors with special characteristics, which cannot be assessed by the test methods in this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 7240-13:2005, Fire detection and alarm systems — Part 13: Compatibility assessment of system components | This Uganda Standard specifies the requirements for compatibility and connectability assessment of system components that either comply with the requirements of US ISO 7240 or with a manufacturer’s specification where there is standard. This standard includes only system requirements when these are necessary for compatibility assessment. This standard also specifies requirements for the integrity of the fire detection and fire alarm system when connected to other systems. This standard does not specify the manner in which the system is designed, installed and used in any particular application. This standard is applicable to systems where the components are connected to control-and-indicating equipment (c.i.e.) and where the components are interconnected by electrical wires. For fire detection and fire alarm systems using other means of interconnection (for example optical fibre or radio frequency links), this standard may be used as guidance. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 7240-15:2004, Fire detection and alarm systems — Part 15: Multisensor fire detectors | This Uganda Standard specifies requirements, test methods and performance criteria for point-type resettable multisensor fire detectors for use in fire detection systems installed in buildings, incorporating in one mechanical enclosure at least one smoke sensor and at least one other sensor which responds to heat, and in which the signal(s) of the smoke sensor(s) is (are) combined with the signal(s) of the heat sensor(s). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 7240-16:2007, Fire detection and alarm systems — Part 16: Sound system control and indicating equipment | This Uganda Standard specifies the requirements, test methods and performance criteria for sound system control and indicating equipment (s.s.c.i.e.) for use in buildings and structures as part of a sound system for emergency purposes (s.s.e.p.) (see in US ISO 7240-1). The s.s.c.i.e. is primarily intended to broadcast information for the protection of lives within one or more specified areas in an emergency, to effect a rapid and orderly mobilization of occupants in an indoor or outdoor area. This includes systems using loudspeakers to broadcast voice announcements for emergency purposes, alert signals complying with ISO 7731, and evacuate signals complying with ISO 8201. The overall requirements of an s.s.e.p., especially concerning audibility and intelligibility, are contained within ISO 7240-19. In addition to ensuring compliance with this standard, the manufacturer should also consider the requirements of ISO 7240-19, national regulations, codes and standards that affect the s.s.c.i.e. design and usability. For example, some regulations require certain optional functions to be available on all s.s.c.i.e. installed within the jurisdiction. The use of the equipment for normal sound reinforcement and distribution systems purposes under nonhazardous circumstances is not excluded. This standard can also be used for the assessment of similar control and indicating equipment for use in systems where the warning-signal broadcast does not include a voice message. This standard does not apply to systems using only sounders or bells. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US 985:2014, Apple — Specification | This Uganda Standard applies to fruits of commercial varieties (cultivars) of apples grown from Malus domestica Borkh, of the Rosaceae family, to be supplied fresh to the consumer, after preparation and packaging. Apples for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 06 September 2016 |
| US ISO 7240-17:2009, Fire detection and alarm systems — Part 17: Short-circuit isolators | This Uganda Standard specifies requirements, test methods and performance criteria for short-circuit isolators, for use in fire detection and alarm systems for buildings; see US ISO 7240-1. Means of isolation or protection incorporated within control and indicating equipment in US ISO 7240-1 are not covered by this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US 997:2014, Cooking banana (matooke) — Specification | This Uganda standard specifies requirements for cooking banana (matooke) grown from Musa spp. (AAA-EAH) and of family Musaceae to be supplied raw to the consumer. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 7240-18:2009, Fire detection and alarm systems — Part 18: Input/output devices | This Uganda Standard specifies requirements, test methods and performance criteria for input/output devices connected to a transmission path of a fire detection and alarm system used to receive and/or transmit signals to or from the transmission path, necessary for the operation of the fire detection and fire alarm system and/or fire protection system. An input/output device can be a physically separate device or its function can be integrated into another device, in which case this standard can be used to assess this function. An input/output device can include signal amplifiers and signal transfer in separate enclosures, in which case the requirements of this standard shall apply. Control and indicating equipment and ancillary control and indicating equipment (e.g. repeater panels and fire brigade panels) are not covered by this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 7240-20:2010, Fire detection and alarm systems — Part 20: Aspirating smoke detectors | This Uganda Standard specifies the requirements, test methods and performance criteria for aspirating smoke detectors for use in fire detection and alarm systems installed in buildings. Aspirating smoke detectors developed for the protection of specific risks that incorporate special characteristics (including additional features or enhanced functionality for which this standard does not define a test or assessment method) are also covered by this standard. The performance requirements for any special characteristics are beyond the scope of this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US 998:2014, Plantain (gonja) — Specification | This Uganda standard specifies requirements for plantain (gonja) (AAB genome) banana grown from Musa spp. (AAA-B) and of family Musaceae. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 6079:1990, Instant tea in solid form — Specification | This Uganda Standard specifies requirements for instant tea in solid form. It does not apply to: instant tea containing non-tea carbohydrates as bulking/filling agents (normally referred to as "filled instant tea"); preparations of instant tea containing added aromatic material unless these are derived exclusively from the plant Camellia sinensis; and decaffeinated instant tea. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 799:2014, Edible full fat soya flour — Specification | This Uganda Standard specifies requirements and methods of sampling and test for edible full fat soya flour for human consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 800:2014, Soya milk — Specification | This Uganda standard specifies requirements and methods of sampling and test for soya milk intended for human consumption | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 801:2014, Soya protein products — Specification | This Uganda standard specifies requirements and methods of sampling and test for soya protein products intended for human consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 802:2014, Textured soya protein products — Specification | This Uganda Standard specifies requirements and methods of sampling and test for textured soya protein products intended for human consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 12:2014, Potable water — Specification | This Uganda Standard specifies requirements and methods of sampling and test for potable water (treated potable water and natural potable water). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 13:2014, Packaged natural mineral water — Specification | This Uganda Standard specifies the requirements and methods of test for packaged natural mineral water offered for human consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 13:2014, Packaged natural mineral water — Specification | This Uganda Standard specifies the requirements and methods of test for packaged natural mineral water offered for human consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US EAS 61:2014, Opaque beer — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for opaque beer. The standard does not cover stout beer. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
