English
FrançaisRegulations
Page 40 of 140, showing 20 records out of 2786 total, starting on record 781, ending on 800
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 3813:2004, Resilient floor coverings — Cork floor tiles — Specification | This Uganda Standard specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an in situ finish. Cork floor coverings can be covered with other complementary layers of decorative materials, e.g. decorative cork or wood veneers, with or without applied colours. This standard includes a classification system based on intensity of use which shows where cork floor tiles should give satisfactory service (see EN 685). It also specifies requirements for marking, labelling and packing | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 13007-1:2010, Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives (2nd Edition) | This Uganda Standard defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives]. This part of US ISO 13007 is applicable to ceramic tile adhesives for internal and external tile installations on walls and floors. It is not applicable to criteria or recommendations for the design and installation of ceramic tiles. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 153:2014, Packaged drinking water — Specification | This Uganda Standard specifies requirements and method of sampling and test for packaged drinking water for direct consumption. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 13007-3:2010, Ceramic tiles — Grouts and adhesives — Part 3: Terms, definitions and specifications for grouts (2nd Edition) | This Uganda Standard defines terms concerning the products, working methods and application properties for ceramic tile grouts. It specifies values of performance requirements for all ceramic tile grouts [cementitious (CG) and reaction resin (RG) grouts]. This part of US ISO 13007 is applicable to ceramic tile grouts for internal and external tile installations on walls and floors. It is not applicable to criteria or recommendations for the design and installation of ceramic tiles. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US 1534:2014, Liqueur — Specification | This Uganda standard specifies requirements and methods of sampling and test for spirit-based liqueurs | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 24011:2009, Resilient floor coverings — Specification for plain and decorative linoleum | This Uganda Standard specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls. To encourage the consumer to make an informed choice, this standard includes a classification system based on the intensity of use, which shows where resilient floor coverings provide satisfactory service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 38:2013, Labelling of pre-packaged foods — General requirements | This Uganda standard applies to the labelling of all prepackaged foods to be offered as such to the consumer or for catering purposes and to certain aspects relating to the presentation thereof. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 26986:2010, Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification | This Uganda Standard specifies the characteristics of floor coverings based on expanded (cushioned) poly (vinyl chloride), supplied as either tiles or rolls. This standard includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 803:2014, Nutrition labelling — Requirements | This Uganda Standard specifies requirements for the nutrition labelling of foods. The standard applies to the nutrition labeling of all foods except for foods for special dietary uses. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 1307:2006, Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses | This Uganda Standard specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut-to-length rubber and plastics hoses for industrial and automotive applications. This standard is intended to be used with the relevant hoses product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 804:2014, Claims on food — Requirements | This Uganda Standard specifies general requirements for claims made on a food irrespective of whether or not the food is covered by an individual East African Standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 1401:1999, Rubber hoses for agricultural spraying | This Uganda Standard specifies requirements for three types of flexible rubber hose for pressure spraying of agropharmaceutical and/or fertilizer products within a temperature range of –10 °C to + 60 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 805:2014, Use of nutrition and health claims — Requirements | This Uganda Standard specifies requirements for the use of nutrition and health claims in food labelling and in advertising. This standard applies to all foods for which nutrition and health claims are made without prejudice to specific provisions under other standards or guidelines relating to foods for special dietary uses and foods for special medical purposes. These requirements for nutrition and health claims do not apply to foods for infants and young children. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 1403:2005, Rubber hoses, textile-reinforced, for general-purpose water applications — Specification | This Uganda Standard specifies the requirements for three types of general-purpose textile-reinforced rubber water hose with an operating temperature range of −25 °C to +70 °C and a maximum working pressure of up to 25 bar.These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as firefighting hoses, for special agricultural machines or as collapsible water hoses. These hoses may be used with additives which lower the freezing point of water | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 1436:2009, Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from to −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 1825:2010, Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification | This Uganda Standard specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft. All four types are designed for use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume; operation within the temperature range of −30 °C to +65 °C and such that they will be undamaged by climatic conditions of −40 °C to +70 °C when stored in static conditions; andoperation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 2398:2006, Rubber hoses, textile-reinforced, for compressed air — Specification | This Uganda Standard specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 25 bar with an operating-temperature range of – 40 °C to + 70 °C, depending on the type and category | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 2929:2014, Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification | This Uganda Standard specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa). Both groups of hoses are designed for: • use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds; and • operation within the temperature range of − 30 °C to + 70 °C, undamaged by climatic conditions of − 50 °C to + 70 °C when stored in static conditions. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 3821:2008, Gas welding equipment — Rubber hoses for welding, cutting and allied processes | This Uganda Standard specifies requirements for rubber hoses (including twin hoses) for welding, cutting and allied processes. This standard specifies requirements for rubber hoses for normal duty of 2 MPa (20 bar) and light duty [limited to hoses for maximum working pressure of 1 MPa (10 bar) and with bore up to and including 6,3 mm]. This standard applies to hoses operated at temperatures −20 °C to +60 °C and used in:⎯ gas welding and cutting;⎯ arc welding under the protection of an inert or active gas; and⎯ processes allied to welding and cutting, in particular, heating, brazing, and metallization.This standard applies neither to thermoplastics hoses nor to hoses used for high pressure [>0,15 MPa (>1,5 bar)] acetylene | 2015-04-21 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 17 September 2016 |
| US ISO 3861:2005, Rubber hoses for sand and grit blasting — Specification | This Uganda Standard specifies the requirements for rubber hoses for wet and dry sand and grit blasting, suitable for use up to a maximum working pressure of 6,3 bar and over an operating temperature range of −25 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
