English
FrançaisRegulations
Page 5 of 140, showing 20 records out of 2786 total, starting on record 81, ending on 100
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 798:2013, Lipid food supplements – Requirements | This Uganda Standard specifies the requirements for lipid food supplements used for complementing the normal diet with essential fatty acids. This standard covers lipid food supplements primarily providing essential fatty acids and presented in forms such as capsules, paste or liquid. The product may be taken directly or added to another food with the primary objective of increasing the energy content of the food and provide essential fatty acids. This standard does not cover lipid food supplements intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 798:2013, Lipid food supplements – Requirements | This Uganda Standard specifies the requirements for lipid food supplements used for complementing the normal diet with essential fatty acids. This standard covers lipid food supplements primarily providing essential fatty acids and presented in forms such as capsules, paste or liquid. The product may be taken directly or added to another food with the primary objective of increasing the energy content of the food and provide essential fatty acids. This standard does not cover lipid food supplements intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 9312:2013, Resistance welding equipment — Insulated pins for use in electrode back-ups | This Uganda Standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment, or other live equipment, which need to be insulated from each other. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification | This Uganda Standard specifies the requirements for general-purpose textile reinforced thermoplastics water-discharge hoses. Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:ambient temperatures: −10 °C to +60 °C; and water temperature during operation: 0 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 8028:1999, Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification | This Uganda Standard specifies the requirements for four types, differentiated by burst pressure and temperature of use, of elastomeric hose and hose assembly for use in airless paint spraying. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 8029:2007, — General-purpose collapsible water hose, textile reinforced — Specification | This Uganda Standard specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of−10 °C to +55 °C. Such hoses are classified into four types, as follows:low pressure, designed for a maximum working pressure of up to 4,0 bar at 23 °C and up to 2,0 bar at 55 °C;medium pressure, for a maximum working pressure of up to 7,0 bar at 23 °C and up to 3,6 bar at 55 °C;high pressure, for a maximum working pressure of up to 10,0 bar at 23 °C and up to 5,1 bar at 55 °C; andextra-high pressure, for a maximum working pressure of up to 15,5 bar at 23 °C and up to 7,9 bar at 55 °C.This standard does not apply to products used for fire-fighting or the conveyance of drinking water | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5774:2006 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification | This Uganda Standard specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from − 10 °C to + 60 °C. The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 14245:2006, Gas cylinders — Specification and testing of LPG cylinder valves — Self closing | This Uganda Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 10441:2007, Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications | This Uganda Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the installation. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 3813:2004, Resilient floor coverings — Cork floor tiles — Specification | This Uganda Standard specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an in situ finish. Cork floor coverings can be covered with other complementary layers of decorative materials, e.g. decorative cork or wood veneers, with or without applied colours. This standard includes a classification system based on intensity of use which shows where cork floor tiles should give satisfactory service (see EN 685). It also specifies requirements for marking, labelling and packing | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 7240-13:2005, Fire detection and alarm systems — Part 13: Compatibility assessment of system components | This Uganda Standard specifies the requirements for compatibility and connectability assessment of system components that either comply with the requirements of US ISO 7240 or with a manufacturer’s specification where there is standard. This standard includes only system requirements when these are necessary for compatibility assessment. This standard also specifies requirements for the integrity of the fire detection and fire alarm system when connected to other systems. This standard does not specify the manner in which the system is designed, installed and used in any particular application. This standard is applicable to systems where the components are connected to control-and-indicating equipment (c.i.e.) and where the components are interconnected by electrical wires. For fire detection and fire alarm systems using other means of interconnection (for example optical fibre or radio frequency links), this standard may be used as guidance. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US 803:2008, Kerosene for domestic heating and illuminating (BIK) | This Uganda Standard specifies the requirements for a hydrocarbon fuel suitable for use in wick-fed, pressure vaporizing and other kerosene burning appliances for space heating, cooking and illumination. | 2008-09-08 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 23 November 2016 |
| US 920:2012, Dried and dried-salted fish — Specification | This Uganda Standard specifies the requirements and the methods of sampling and test for various types of dried and dried-salted fish intended for human consumption. This standard does not apply to dried silver cyprinid (mukene) and dried smoked fish. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US EAS 349:2014, Liquid glucose (glucose syrup) – Specification | This Uganda Standard specifies the requirements and the methods of sampling and test for liquid glucose (glucose syrup) for human consumption. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 03 August 2016 |
| US EAS 350:2014, Hard boiled sweets – Specification | This Uganda Standard specifies the requirements and the methods of sampling and test for hard-boiled sweets. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 03 August 2016 |
| US ISO 4642-2:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). This part of US ISO 4642 applies to delivery hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 4642-1:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter. Hoses conforming to this part of US ISO 4642 are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works. This part of US ISO 4642 applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US EAS 205:2014, Controls for heating units in household electric ranges — Specification (2nd Edition) | This Uganda Standard specifies the requirements and test methods for control units for household electric ranges. It applies to multi-heat switches, energy regulators and thermostats including those for ovens, hotplates and rotisseries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 12170:1996, Gas welding equipment — Thermoplastic hoses for welding and allied processes | This Uganda Standard specifies the requirements and relevant methods of measurement and testing of two types of thermoplastic hoses with maximum design working pressure of 1 MPa and of 2 MPa, used for flexible gas supply lines in specific fields of application as follows:small kits for brazing and welding in accordance with US ISO 14112;air-aspirated blowpipes for welding and allied processes;miniature welding such as jewellery work, dental work excluding acetylene applications; andarc welding with shielding gas. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US EAS 812-1:2015, Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash | This Uganda Standard specifies the requirements and methods of test for synthetic and combined (soap and synthetic) hand wash. This standard does not apply to soap-based hand wash. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
