Regulations
Page 61 of 140, showing 20 records out of 2786 total, starting on record 1201, ending on 1220
Title | Description | Implementation date | Source | Publication | Created |
---|---|---|---|---|---|
BOS 117: 2011 2nd ed. Pneumatic tyres for commercial vehicles and their trailers – Specification | This specification covers new pneumatic tyres primarily designed for use by all road vehicles. It does not however, apply to, a) new tyres for private (passenger) cars and their trailers, b) tyres of a speed category below 80km/h, or c) tyres designed for cycles and motor cycles. | 2011-07-20 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
Tanzania Food, Drugs and Cosmetics (Food Fortification) Regulations, 2011 | 2011-07-22 | Ministry of Health/Tanzania Food and Drugs Authority (TFDA) | Tanzania Food, Drugs, and Cosmetics (Food Fortification) GN No. 205 | 19 June 2018 | |
The Tanzania Food, Drugs and Cosmetics (Food Fortification)regulations,2011 | Save for small scale and micro scale manufacturers. These regulations shall apply in areas in which the Act applies including all food imported, domestically manufactured or sold and fortified for human consumption. | 2011-07-22 | Tanzania Food and Drugs Authority | Governmet Notice no 25 published on 22/7/2011. The Tanzania Food, Drugs and Cosmetics Act (Cap 219) | 27 June 2016 |
Refined sugar – Specification | This Tanzania Standard prescribes the requirements and the methods of sampling and test for refined sugar intended for industrial use or direct human consumption. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 101:2011 | 31 August 2016 |
TZS 726: 2011 Semi-gloss solvent borne paints for interior and exterior use – Specification | This measure specifies requirements for semi-gloss solvent borne paints for interior and exterior use. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 726: 2011 | 28 September 2016 |
TZS 144 (Part 2): 2011 Lead – acid starter batteries – Part 2: Dimension of batteries and marking of terminals | This Tanzanian Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 12 V and 6 V. All batteries in accordance with this Tanzanian Standard can be fastened to the vehicle either by means of the ledges around the case or by means of a hold-down device engaging with the lid. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 144 (Part 2): 2011 | 26 September 2017 |
TZS 1275 Cassava crisps – Specification | Specifies requirements and methods of sampling and test for crisps made from sweet varieties of cassava (Manihot esculenta Crantz). | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1275:2010 | 06 July 2017 |
TZS 1277:2010 Cassava wheat composite flour – Specification | Specifies the requirements and the methods of sampling and test for cassava-wheat composite. This standard does not apply to other composite flours from non wheat sources which may be used in different products. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1277:2010 | 06 July 2017 |
TZS 1278: 2010 Fresh potato tuber (ware potato tuber) – Specification | Specifies the requirements for ware potato tuber of varieties (cultivars) grown from (Solanum tuberosum L.) and its hybrids to be supplied fresh and either packaged or sold loose for human consumption. It does not cover the requirements for potato tubers intended for industrial processing or seed potato tuber. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1278;2010 | 06 July 2017 |
TZS 1279:2010Fresh potato chips – Specification | This measure specifies requirements and methods of sampling and test for deep fried potato chips ready for consumption | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1279:2010 | 06 July 2017 |
TZS 242:2011Farm implement – Forged hand hoe – Material and manufacturing process – Specification | This Tanzania Standard prescribes the material require¬ments and manufacturing processes only, which are required for the manufacture of a hand hoe. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 242:2011 | 09 October 2017 |
TZS 1408: 2011 Cationic polyacrylamides for treatment of water intended for human consumption – Specification | This measure is applicable to Cationic polyacrylamides, used for treatment of water intended for human consumption. It describes the characteristics of Cationic polyacrylamides and specifies the requirements and corresponding test methods. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1408: 2011 | 15 September 2016 |
TZS 1409: 2011 Polyamines for treatment of water intended for human consumption – Specification | This measure is applicable to polyamines, used for treatment of water intended for human consumption. It describes the characteristics of polyamines and specifies the requirements and corresponding test methods. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1409: 2011 | 15 September 2016 |
TZS 1410: 2011Chemicals used for treatment of water intended for human consumption – Anionic and non-ionic polyacrylamides – Specification | This measure is applicable to anionic and non-ionic polyacrylamides, used for treatment of water intended for human consumption. It describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and corresponding test methods. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1410: 2011 | 15 September 2016 |
TZS 1412: 2011 Fat spreads and blended fat spreads – Specification | This measure has been prepared to ensure the safety and quality of fat spreads and blended fat spreads produced in or imported into the country. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1412: 2011 | 15 September 2016 |
TZS 1413: 2011Building hardware – Padlocks and padlock fittings – Requirements and test methods | Padlocks are portable locks used to protect against theft, vandalism, sabotage, espionage, unauthorized use, and harm. They are designed to protect against some degree of forced and surreptitious entry. The padlock and padlock fittings must have several important features to be effective. These features needs to be standardized so as to meet and address all that factions mentioned above | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1413: 2011 | 16 September 2016 |
TZS 1415:2011 Agricultural equipment – Four wheeled tractors – Specifications | This measure is being prepared so as to take into account of the quality performance of these tractors. This is due to the fact that some of these tractors have been experienced to perform below the required performance levels. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1415:2011 | 16 September 2016 |
TZS 1006: 2011 Metre rules and rulers for the school and office use – Specification | This measure specifies the requirements for metre rules and rulers for schools and office use. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1006: 2011 | 16 September 2016 |
TZS 1416:2011 Agricultural equipment – Disc plough – Specifications | The disc plough is an agricultural implement used to turn over the surface of the soil in order to cultivate crops. The disc plough is usually mounted on a tractor, though, some may have a rear support by one or more wheels, and some may be trailed. The equipments are most popular and commonly used in Tanzania especially in rural areas for agricultural purposes. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1416:2011 | 16 September 2016 |
TZS 1428:2011 Setting lotion – Specification | This measure specifies the requirements, methods of sampling and test for setting lotions. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 1428:2011 | 16 September 2016 |