English
FrançaisRegulations
Page 76 of 140, showing 20 records out of 2786 total, starting on record 1501, ending on 1520
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification | This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification | This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 7225:2005, Gas cylinders — Precautionary labels | This Uganda Standard specifies the design, content (that is, hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this standard.. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-1: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 2 hoop wrapped cylinder or tube with a load-sharing metal liner and composite reinforcement on the cylindrical portion only. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-2: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-3: 2013 Gas cylinders— Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load –sharing metallic or non-metallic liners | This Uganda Standard specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard does not address the design, fitting and performance of removable protective sleeves. . | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 14245:2006, Gas cylinders — Specification and testing of LPG cylinder valves — Self closing | This Uganda Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| Standards (Import Inspection) Regulations, 2008 (SIIR) | The Standard requirements consist of Packing and marking; sampling; inspection and testing for leakages in gloves | 2008-11-19 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 05 October 2016 |
| Standards (Import Inspection) Regulations, 2008 (SIIR) | Protection of human life by controlling the quality of the products covered by the scope of BOS 304. | 2012-05-04 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 05 October 2016 |
| Burnt Clay Masonry Units-Specification | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Burnt clay masonry units - Specification | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Burnt Clay Masonry Units - Specification | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticized polyvinyl chloride (UPVC) soil, waste and vent pipes and fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticized polyvinyl chloride (UPVC) soil, waste and vent pipes and fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticized polyvinyl chloride (UPVC) soil, waste and vent pipes and fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticized polyvinyl chloride (UPVC) soil, waste and vent pipes and fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticised polyvinyl chloride (UPVC) sewer and drain pipes and pipe fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticised polyvinyl chloride (UPVC) sewer and drain pipes and pipe fittings | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticised polyvinyl chloride (UPVC) sewer and drain pipes and pipe fittings. | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 | |
| Unplasticised polyvinyl chloride (UPVC) sewer and drain pipes and pipe fittings. | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 06 October 2016 |
