English
FrançaisRegulations
Page 78 of 140, showing 20 records out of 2786 total, starting on record 1541, ending on 1560
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| TZS 1679: 2014, Hot-rolled, heavy-thickness carbon steel sheets, coils and strips — Specification | This standard specifies requirements for hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | 24 September 2016 | |
| TZS 1196:2015, Guava juice — Specification | This standard prescribes requirements and methods of sampling and tests for guava juice. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 1196:2015 | 24 September 2016 |
| TZS 1196: 2015, Guava juice — Specification | This standard prescribes requirements and methods of sampling and tests for guava juice. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | 24 September 2016 | |
| TZS 605-3:2015 | This standard specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | 24 September 2016 | |
| Regulamento de Produção, Transporte, Comercialização e Garantia de Qualidade de Cimentos CorrentesDecreto n.º 28/2016 de 18 de Julho | 2016-12-14 | INNOQ | NM 80 | 23 September 2016 | |
| Regulamento de Produção, Transporte, Comercialização e Garantia de Qualidade de Cimentos CorrentesDecreto n.º 28/2016 de 18 de Julho | The purpose of this Regulation is to establish technical requirements, health, hygiene and safety, and the environment which must be observed in the production, transportation and marketing of cement chains, as well as establish the obligation of conformity assessment of the national cement and imported. | 2016-12-14 | INNOQ | NM NP EN 197-1 | 23 September 2016 |
| TZS 741:2010 Simsim (sesame) seeds – Specification | This measure specifies requirements and methods of sampling and tests for Simsim (Sesame) seeds (sesamum indicum, Linnaeus). | 2011-01-25 | Tanzania Bureau of Standards (TBS) | TZS 741:2010 | 23 September 2016 |
| TZS 741:2010 Simsim (sesame) seeds – Specification | This measure specifies requirements and methods of sampling and tests for Simsim (Sesame) seeds (sesamum indicum, Linnaeus). | 2011-01-25 | Tanzania Bureau of Standards (TBS) | TZS 741:2010 | 23 September 2016 |
| TZS 739:2010 Cashew kernels – Specification | This measure specifies requirements and methods of sampling and test for kernels obtained from the cashewnut tree (Anacardium occidentale, Linnaeus) for human consumption | 2011-01-25 | Tanzania Bureau of Standards (TBS) | TZS 739:2010 | 23 September 2016 |
| TZS 683: 2002, Aluminium and aluminium alloys – Household cooking utensils – Specification | This standard covers cold-formed aluminium and aluminium alloys utensils for household use but does not include pressure cookers. It specifies dimensions, materials, construction and testing. | 2002-10-22 | Tanzania Bureau of Standards (TBS) | 22 September 2016 | |
| Plastics piping systems for water supply drainage and sewerage under pressure (PVC-U) | This standard specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | 22 September 2016 | |
| TZS 736: 2015 Knitted polyester/cellulosic blended fabric — Specification | This measure specifies the requirements for knitted polyester/cellulosic blended fabric for apparel purposes. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 736: 2015 | 22 September 2016 |
| ISO 4641:2010, Rubber hoses and hose assemblies for water suction and discharge — Specification | This Uganda Standard specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: ambient temperatures: −25 °C to +70 °C; andwater temperatures during operation: 0 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| TZS 724: 2011 Matt solvent- borne paints for interior and exterior use – Specification | This measure specifies the requirements for matt solvent – borne paints for interior and exterior use. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 724: 2011 | 22 September 2016 |
| US ISO 4081:2010, Rubber hoses and tubing for cooling systems for internal combustion engines — Specification | This Uganda Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internal combustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 4079:2009, Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 ºC or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 3994:2007, Plastics hoses — Helical-thermoplastic reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification | This Uganda Standard specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from − 10 °C to + 55 °C. The three types of hose are for light-, medium- and heavy-duty applications. The types of hoses covered in this standard are not intended for use with flammable or combustible materials, nor with aromatic solvents | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 3949:2009, Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification | This Uganda Standard specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| TZS 1518-7: 2012 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 7: Flexible cables screened and unscreened with two or more conductors | 2012-07-06 | Tanzania Bureau of Standards (TBS) | TZS 1518-7: 2012 | 22 September 2016 | |
| US ISO 3862:2009, Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water based fluids — Specification | This Uganda Standard specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH and −40 °C to +120 °C for types R12, R13 and R15. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
