English
FrançaisRegulations
Page 98 of 140, showing 20 records out of 2786 total, starting on record 1941, ending on 1960
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 13709:2009, Centrifugal pumps for petroleum, petrochemical and natural gas industries | This Uganda Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This standard is applicable to overhung pumps, between-bearings pumps and vertically suspended pumps. Clause 9 provides requirements applicable to specific types of pump. All other clauses of this standard are applicable to all pump types. Illustrations are provided of the various specific pump types and the designations assigned to a specific type. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13710: 2004, Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps | This Uganda Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13847: 2013, Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines | This Uganda Standard specifies requirements for the petroleum, petrochemical and natural gas industries, for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems which meet the requirements of US ISO 13623 or equivalent. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 14313:2007, Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves | This Uganda Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of US ISO 13623 for the petroleum and natural gas industries. This standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723). This standard is not applicable to valves for pressure ratings exceeding PN 420. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15136-1: 2009, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 1: Pumps | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered by this part of US ISO 15136. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US CODEX STAN 288:1976 (Revision in 2010), Standard for Cream and Prepared Creams | This Uganda Standard applies to cream and prepared creams for direct consumption or further processing | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US 1628:2016, Sesame – Specification | This Uganda Standard specifies requirements, sampling and test methods for sesame (Sesamun indicum.L.) for human consumption. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| 1128. US ISO 15136-2: 2006, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 2: Surface-drive systems | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface-drive systems for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of surface-drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15589-1:2015, Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines | This Uganda Standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in US ISO 13623 for the petroleum, petrochemical, and natural gas industries. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15589-2:2012, Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines | This Uganda Standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection (CP) systems for offshore pipelines for the petroleum, petrochemical and natural gas industries as defined in US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15590-3:2004, Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges | This Uganda Standard applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges. This part of US ISO 15590 specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. This part of US ISO 15590 designates those categories of flanges that meet the industry’s need to match ISO 3183 pipe. These flanges are for normal and low-temperature service and include supplementary requirements where required for sour service. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US 1635 2016, Shea butter – Specification | This Uganda Standard specifies requirements, sampling and test methods for shea butter Vitellaria paradoxa derived from the kernels of the nut of Vitellaria paradoxa | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6465:2009, Spices – Cumin (Cuminum cyminum L.) – Specification (2nd Edition) | This Uganda Standard specifies requirements for fruits of cumin (Cuminum cyminum L.) | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification | This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16812:2007, Petroleum, petrochemical and natural gas industries — Shell and-tube heat exchangers | This Uganda Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. This standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. This standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 21809-1:2011, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) | This Uganda Standard specifies requirements of plant-applied external three-layer polyethylene- and polypropylene-based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas industries in accordance with US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 21809-2:2014, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings | This Uganda Standard specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 21809-3:2011, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings | This Uganda Standard specifies requirements for field joint coating of seamless or welded steel pipes for pipeline transportation systems in the petroleum and natural gas industries as defined in US ISO 13623. This part of US ISO 21809 specifies the qualification, application and testing of the corrosion protection coatings applied to steel surfaces left bare after the pipes and fittings (components) are joined by welding. This part of US ISO 21809 does not address additional mechanical protection, thermal insulation or joint infills for concrete weight-coated pipes. This part of US ISO 21809 defines and codifies the different types of field joint coatings for buried or submerged pipelines. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 209:2007, Aluminium and aluminium alloys — Chemical composition | This Uganda Standard specifies the designations indicating the chemical composition of aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 1642:2016, Domestic biogas stoves — Specification | This Uganda Standard covers construction, operation, safety requirements and methods of test for stoves intended for use with domestic biogas systems. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
