English
FrançaisRegulations
Page 100 of 140, showing 20 records out of 2786 total, starting on record 1981, ending on 2000
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 5175:1987, Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, requirements and tests | This Uganda Standard lays down the general specifications, requirements of safety devices for fuel gases and oxygen or compressed air used downstream of cylinder or pipeline outlet regulators and of pipeline outlet valves, and upstream of blowpipes for welding, cutting and allied processes. lt does not specify location and combination of these devices in the gas system. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5182:2008, Resistance welding — Materials for electrodes and ancillary equipment | This Uganda Standard specifies the characteristics of materials for resistance welding electrodes and ancillary equipment which are used for carrying current and transmitting force to the work. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 225:2001, Standard for asparagus | This Uganda Standard applies to shoots of commercial varieties of asparagus grown from Asparagus officinalis L., of the Liliaceae family, to be supplied fresh to the consumer, after preparation and packaging. Asparagus for industrial processing is excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5183-1:1998, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10 | This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and for which the electrode taper fits in conformance with US ISO 1089. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 226:2001, Standard for cape gooseberry | This Uganda Standard applies to commercial varieties of cape gooseberries grown from Physalis peruviana (L.), of the Solanaceae family, to be supplied fresh to the consumer, after preparation and packaging. Cape gooseberries for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5183-2:2000, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes | This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and a parallel shaft is used to fix the adaptor to the electrode holder in accordance with US ISO 8430-3. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 241:2003, Standard for canned bamboo shoots | This Uganda Standard applies to canned bamboo shoots, complying with the characteristics of edible varieties from species of bamboo shoots and offered for direct consumption, including for catering purposes, repacking or further processing | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5822:1988, Spot welding equipment — Taper plug gauges and taper ring gauges | This Uganda Standard specifies requirements for taper plug and ring gauges used for the checking of type A, B and C tapers according to US ISO 1089. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 242:2003, Standard for canned stone fruits | This Uganda Standard applies to canned stone fruits of the genus Prunus, and offered for direct consumption, including for catering purposes or for repacking if required. It does not apply to the product when indicated as being intended for further processing. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5826:2014, Resistance welding equipment — Transformers — General specifications applicable to all transformers | This Uganda Standard gives specifications applicable to the following types of transformers for use in resistance welding equipment:single-phase transformers for a.c. welding, typically operating at 50 Hz or 60 Hz;single-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz;single-phase inverter transformers with connected rectifier for d.c. welding, typically operating at 400 Hz to 2 kHz; andthree-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz.For the purposes of this standard, the term transformer can refer to the transformer alone or with connected rectifier (transformer-rectifier unit). This standard applies to transformers built to protection class I or II according to IEC 61140. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 255:2007, Standard for table grapes | This Uganda Standard applies to commercial varieties (cultivars) of table grapes grown from Vitis vinifera L., of the Vitaceae family, to be supplied fresh to the consumer, after preparation and packaging. Grapes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5828:2001, Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics | This Uganda Standard specifies dimensions and characteristics of secondary connecting cables which are aircooled over their length and with terminals connected to water-cooled lugs. The secondary connecting cables are used for connection between the secondary terminals of a welding transformer and the electrode holders. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 260:2007, Standard for pickled fruits and vegetables | This Uganda Standard applies to pickled fruits and vegetables and offered for direct consumption, including for catering purposes or for repacking if required. It does not apply to the product when indicated as being intended for further processing. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 7291:2010, Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) | This Uganda Standard specifies requirements and test methods for pressure regulators in manifold systems used in welding, cutting, and allied processes for: compressed gases up to 30 MPa (300 bar);dissolved acetylene;liquefied petroleum gases (LPG);methylacetylene-propadiene-mixtures (MPS);carbon dioxide (CO2).It is not applicable to pressure regulators fitted directly to the gas cylinders, as defined in US ISO 2503. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 303:2011 – Standard for tree tomatoes | This Uganda Standard applies to commercial varieties of tree tomatoes grown from Cyphomandra betacea Sendt or Solanum betaceum Cav. of the Solanaceae family, to be supplied fresh to the consumer, after preparation and packaging. Tree tomatoes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 7931: 1985, Insulation taps and bushes for resistance welding equipment | This Uganda Standard specifies dimensions and requirements for insulated taps and bushes in the secondary circuit for resistance welding equipment, especially for use in back-ups according to ISO 5827. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 310:2013, Standard for pomegranates | This Uganda Standard applies to fruits of commercial varieties of pomegranates grown from Punica granatum L., of the Punicaceae family, to be supplied fresh to the consumer after preparation and packaging. Pomegranates for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 8430-1:1988, Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10 | This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type AI without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding cylinder in multiple spot welding equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 86:1981, Standard for cocoa butter | This Uganda Standard applies exclusively to cocoa butter used as an ingredient in the manufacture of chocolate and chocolate products. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 8430-2:1988, Resistance spot welding — Electrode holders — Part 2: Morse taper fixing | This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type 9) without offset and with a facility for cable clamping, and where a male Morse taper is used to fix the holder directly to the welding cylinder in multiple spot welding equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
