English
FrançaisRegulations
Page 99 of 140, showing 20 records out of 2786 total, starting on record 1961, ending on 1980
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 15465:2004, Pipework — Stripwound metal hoses and hose assemblies | This Uganda Standard specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum allowable pressures of up to 40 bar. These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 196:1995, Standard for litchi | This Uganda Standard applies to commercial varieties (cultivars) of litchis grown from Litchi chinensis Sonn., of the Sapindaceae family, to be supplied fresh to the consumer, after preparation and packaging. Litchis for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 16438:2012, Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications | This Uganda Standard specifies requirements for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C. It is applicable to irrigation hoses with nominal diameters between 40 mm and 500 mm and working pressures between 0,3 bar (0,03 MPa) and 6 bar (0,6 MPa). This standard is applicable to two types of hose configurations: distributor hose (with outlet connections) and plain hose (without outlet connections). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 204:1997, Standard for mangosteen | This Uganda Standard applies to commercial varieties of mangosteens grown from Garcinia mangostana L., of the Guttiferae family, to be supplied fresh to the consumer, after preparation and packaging. Mangosteens for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 17165-1:2007, Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements | This Uganda Standard specifies requirements for hose assemblies that are manufactured from hoses that conform to US ISO 3949 and to all parts of US ISO 1436, US ISO 3862, US ISO 4079 and US ISO 11237 and hose fittings with elastomeric seals that conform to US ISO 12151-1, US ISO 12151-2, US ISO 12151-3 and ISO 12151-6. This part of US ISO 17165 contains information of the most important criteria for the selection of preferred types of hoses and hose fittings with elastomeric sealing for use in hydraulic fluid power applications. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 213:1999, Standard for limes | This Uganda Standard applies tocommercial varieties of limes grown from Citrus latifolia Tanaka, of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Limes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 23297:2008, Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification | This Uganda Standard specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic hoses and hose assemblies of nominal size from 3,2 to 31,5. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR, and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for grades A and B and −40 °C to +120 °C for grades C and D. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 214:1999, Standard for pummelos (citrus grandi) | This Uganda Standard applies to commercial varieties of pummelos grown from Citrus grandis (L.) Osbeck (syn. C. maxima Merr.), of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Pummelos for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 669:2000, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements | This Uganda Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete movable welding equipment. The following types are included: • single-phase equipment with alternating welding current; • single-phase equipment with rectified welding current by rectification of the output of the welding transformer; • single-phase equipment with inverter welding transformer; • three-phase equipment with rectified welding current by rectification of the output of the welding transformer; • three-phase equipment with a current rectification in the input of the welding transformer (sometimes called frequency convertor); and • three-phase equipment with inverter welding transformers. This standard applies neither to welding transformers sold separately nor to safety requirements | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 215:1999, Standard for guavas | This Uganda Standard applies to commercial varieties of guavas grown from Psidium guajava L., of the Myrtaceae family, to be supplied fresh to the consumer, after preparation and packaging. Guavas for industrial processing are excluded | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 216:1999, Standard for chayotes | This Uganda Standard applies to commercial varieties of chayotes grown from Sechium edule (Jacq.) Sw., of the Cucurbitaceae family, to be supplied fresh to the consumer, after preparation and packaging. Chayotes for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 218:1999, Standard for ginger | This Uganda Standard applies to the rhizome of commercial varieties of ginger grown from Zingiber officinale Roscoe, of the Zingiberaceae family, to be supplied fresh to the consumer, after preparation and packaging. Ginger for industrial processing is excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 2503:2009, Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa | This Uganda Standard specifies requirements for single or two-stage pressure regulators without flow metering devices for connection to gas cylinders used for compressed gases up to 300 bar 1) (30 MPa),dissolved acetylene,liquefied petroleum gases (LPG),methylacetylene-propadiene mixtures (MPS), andcarbon dioxide (CO2),for use in welding, cutting and allied processes. It does not cover pressure regulators having a nominal outlet pressure p2 > 20 bar. This standard also specifies requirements for single or two-stage pressure regulators with flow metering devices for connection to gas cylinders used for compressed gases or mixtures up to 300 bar (30 MPa), and carbon dioxide (CO2), for use in welding, cutting and allied processes. This standard does not cover pressure regulators intended for direct use on cylinder bundles. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 219:1999, Standard for grapefruits (Citrus paradisi) | This Uganda Standard applies to commercial varieties of grapefruits grown from Citrus paradisi Macfad., of the Rutaceae family, to be supplied fresh to the consumer, after preparation and packaging. Grapefruits for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5171:2009, Gas welding equipment — Pressure gauges used in welding, cutting and allied processes | This Uganda Standard specifies requirements for Bourdon-tube pressure gauges normally used with compressed gas systems at pressures up to 30 MPa (300 bar) in welding, cutting and allied processes. It also covers use for dissolved acetylene and for liquefied gases under pressure. It does not cover gauges for acetylene in acetylene-manufacturing plants | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 220:1999, Standard for longans | This Uganda Standard applies to commercial varieties of longans grown from Dimocarpus longan Lour., of the Sapindaceae family, to be supplied fresh to the consumer, after preparation and packaging. Longans for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
| US ISO 5172:2006, Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications | This Uganda Standard specifies specifications for blowpipes for gas welding, heating and cutting of metals. It applies to manual blowpipes for welding and heating with a nominal thermal power up to 32 000 kcal/h, and manual and machine cutting blowpipes with a cutting range up to 300 mm. This standard does not apply to air-aspirated blowpipes which are covered in US ISO 9012. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US CODEX STAN 224:2001, Standard for tannia | This Uganda Standard applies to the tubercles of commercial varieties of lilac tannia grown from Xanthosoma violaceum Schott and white tannia grown from Xanthosoma sagittifolium (L.) Schott, of the Araceae family, to be supplied fresh to the consumer, after preparation and packaging. Tannias for industrial processing are excluded. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 15 September 2016 |
