English
FrançaisRegulations
Page 108 of 140, showing 20 records out of 2786 total, starting on record 2141, ending on 2160
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 17680:2015, Tourism and related services -- Thalassotherapy -- Service requirements | This Uganda Standard establishes the requirements for the provision of services in thalassotherapy centres using marine environment's beneficial effects with curative or preventive purposes, aiming at ensuring -Good quality services responding to customer's implicit and explicit needs, -The respectful use of the thalassotherapy concept, -Very specifically, the implementation of hygiene and safety principles, and -The comfort to the customers. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 3864-1:2011, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings | This Uganda Standard establishes the safety identification colours and design principles for safety signs and safety markings to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. This standard is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61427-1:2013, Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application | This Uganda Standard gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems and to the typical methods of test used for the verification of battery performances. This part deals with cells and batteries used in photovoltaic off-grid applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 14122-1:2016, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access | This Uganda Standard gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 12609-2:2013, Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use | This Uganda Standard gives guidance and information to users, manufacturers, suppliers, and safety advisors on the selection and use of eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-8:2013, Respiratory protective devices — Human factors — Part 8: Ergonomic factors | This Uganda Standard gives guidance on the generic ergonomic factors for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). It specifies principles relating to: the biomechanical interaction between RPD and the human body; the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 13534:2000, Petroleum and natural gas industries — Drilling and production equipment — Inspection, maintenance, repair and remanufacture of hoisting equipment | This Uganda Standard gives guidelines and establishes requirements for inspection, maintenance, repair and remanufacture of items of hoisting equipment used in drilling and production operations, in order to maintain the serviceability of this equipment. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 3864-3:2012, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs | This Uganda Standard gives principles, criteria and guidance for the design of graphical symbols for use in safety signs as defined in US ISO 3864 1, and for the safety sign element of product safety labels as defined in US ISO 3864 2. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 13706:2011, Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers | This Uganda Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14557:2002, Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies | This Uganda Standard gives requirements and test methods for rubber and plastics suction hoses for fire-fighting purposes. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders | This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-3:2016, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails | This Uganda Standard gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-2:2016, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways | This Uganda Standard gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. (This Uganda Standard cancels and replaces, US 463-2:2005 Photovoltaic devices — Part 2: Requirements for reference solar cells, which has been republished). | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 24 August 2016 |
| US ISO 5826:2014, Resistance welding equipment — Transformers — General specifications applicable to all transformers | This Uganda Standard gives specifications applicable to the following types of transformers for use in resistance welding equipment:single-phase transformers for a.c. welding, typically operating at 50 Hz or 60 Hz;single-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz;single-phase inverter transformers with connected rectifier for d.c. welding, typically operating at 400 Hz to 2 kHz; andthree-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz.For the purposes of this standard, the term transformer can refer to the transformer alone or with connected rectifier (transformer-rectifier unit). This standard applies to transformers built to protection class I or II according to IEC 61140. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
