English
FrançaisRegulations
Page 108 of 140, showing 20 records out of 2786 total, starting on record 2141, ending on 2160
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 764:2002, Horology — Magnetic resistant watches | This Uganda Standard specifies the minimum requirements and test methods for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current magnetic field of 4 800 A/m. Annex A deals with watches designated as magnetic resistant with an additional indication of intensity of a magnetic field exceeding 4 800 A/m. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 1413:1984, Horology — Shock resistant watches | This Uganda Standard specifies the minimum requirements for shock-resistant watches and describes the corresponding method of test. It is intended to allow homologation testing of watches rather than the individual control of all watches of a production batch. Indeed, assuming that each watch could comply with the minimum requirements without apparent damage, readjustment could still be made necessary because the test can lead to an alteration of the initial rate of a watch. This standard is based on the simulation of the shock received by a watch on falling accidentally from a height of 1 m on to a horizontal hardwood surface. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6425:1996, Divers’ watches | This Uganda Standard specifies requirements and test methods for divers’ watches and for divers’ watches for use in deep diving. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 22810:2010, Horology — Water-resistant watches | This Uganda Standard establishes the requirements and specifies the test methods used to verify the water resistance of watches. Moreover, it indicates the marking which the manufacturer is authorized to apply to them. Divers' watches, specified as such, are covered by US ISO 6425 which establishes special requirements. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 203:2014, Boxes for enclosure of electrical accessories — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of test for boxes intended to contain one or more electrical accessories and to be recessed into a wall, ceiling or similar flat-surfaced structure. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 205:2014, Controls for heating units in household electric ranges — Specification (2nd Edition) | This Uganda Standard specifies the requirements and test methods for control units for household electric ranges. It applies to multi-heat switches, energy regulators and thermostats including those for ovens, hotplates and rotisseries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 168:2014, Junction boxes for use in electrical installations — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of sampling and test for junction boxes of surface or flush mounting types for use in fixed wiring installations. This standard applies to junction boxes used in a.c. and d.c. circuits where the rated voltage does not exceed 250 V and where the conductors are not subject to mechanical tension in normal use. It covers junction boxes having fixed terminals with capacity for cable conductors up to 10 mm2. It does not apply to junction boxes for use in conditions where special protection against the ingress of dust or moisture is required. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-1: 2014, Code of practice for safety of electrical installations — Part 1: General | This Uganda Standard specifies the terms and definitions, symbols and methods of earthing of electrical supply, communication facilities and associated equipment. It applies to all new and existing installations and extensions. This standard does not cover the earthed return of electric railways nor those lightning protection wires that are normally independent of supply or communication wires or equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 1512:2014, Adhesives — Ethyl & methyl cyanocrylate types 1,2 and 3 — Specification | This Uganda Standard specifies requirements and methods of test for two grades of one component Grade M - methyl 2-cyanoacrylate and Grade E - ethyl-2-cyanoacrylate (commonly sold under trade name such as "Super Glue"). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 811-2:2014, Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment | This Uganda Standard specifies the safety requirements for installations, operations and maintenance of electric supply stations. It also provides safety guidelines to personnel involved in electric supply stations and their associated structural arrangements that are accessible only to qualified personnel. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 1572:2014, Standard specification for epoxy (flexible) adhesive for bonding metallic and non- metallic materials | The Uganda Standard covers a two-part modified epoxy paste adhesive for bonding metallic and nonmetallic materials. The adhesive should be suitable for forming bonds that can withstand environmental exposure to temperatures from –184 to 82 °C (–300 to 180 °F) when exposed to an expected combination of stress, temperature, and relative humidity to be encountered in service | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 811-3:2014, Code of practice for safety of electrical installations — Part 3 :Installation and maintenance of overhead electric supply and communication lines | This Uganda Standard specifies safety requirements for installation and maintenance of overhead electric supply and communication lines and their associated equipment. It prescribes the associated structural arrangements of such systems and the extension of such systems into buildings. It includes requirements for spacing, clearances, and strength of construction. This part of US EAS 811 does not apply to installations in electric supply stations except as required by US EAS 811-1. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-4:2014, Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines | This Uganda Standard specifies safety requirements for the installation and maintenance of underground electric supply and communication lines. It prescribes the associated structural arrangements and the extension of such systems into buildings. It also covers the cables and equipment employed primarily for the utilization of electric power when such cables and equipment are used by the utility in the exercise of its function as a utility. This standard does not apply for installations in electric supply stations. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 1565:2014, Standard specification for water emulsion floor polish | This Uganda Standard covers floor polish intended for use on all non-wood floors and on sealed-wood floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 811-5: 2014, Code of practice for safety of electrical installations — Part 5: Operation of electric supply lines, communication lines and equipment | This Uganda Standard specifies the practical work requirements to be followed during installation, operation and maintenance of electric supply and communications lines and equipment as a means of safeguarding employees and the public from injury. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 122:1999, Sulfuric acid — Specification | This Uganda Standard prescribes the requirements and the methods of sampling and test for sulfuric acid. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-3:2002, Polishes — Specification — Part 3: Floor polish water emulsion buffable type | This Uganda Standard prescribes requirements and methods of test for water emulsion floor polish buffable type. This standard applies to a buffable water emulsion floor polish for general application on vinyl, thermoplastic, linoleum, rubber vinyl asbestos, asphalt terrazo, marble, cured concentrate ceramic and quarry tiles. It shall not be used on wooded, cork or magnesite floors unless these are properly sealed. Floor polish in this specification is for polishes used on floor areas that are subjected to heavy abraise foot traffic and any areas where buffing is desired. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 3862:2009, Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water based fluids — Specification | This Uganda Standard specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH and −40 °C to +120 °C for types R12, R13 and R15. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US EAS 294:2002, Scouring powders — Specification | This Uganda Standard specifies requirements and methods of test for synthetic household detergent scouring powder for the removal of tenacious soil from hard surfaces and kitchen utensils. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
