English
FrançaisRegulations
Page 110 of 140, showing 20 records out of 2786 total, starting on record 2181, ending on 2200
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 61215-2:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1. This part of US IEC 61215 is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61646: 2008, Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval | This Uganda Standard lays down requirements for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by US IEC 61215. (This Uganda Standard cancels and replaces US 553:2005, Thin film terrestrial PV (PV) modules – design qualification and type approval, which has been republished). | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US ISO 10431:1993, Petroleum and natural gas industries — Pumping units — Specification | This Uganda Standard lays down specification covering the design and rating of pumping units. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 5175:1987, Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, requirements and tests | This Uganda Standard lays down the general specifications, requirements of safety devices for fuel gases and oxygen or compressed air used downstream of cylinder or pipeline outlet regulators and of pipeline outlet valves, and upstream of blowpipes for welding, cutting and allied processes. lt does not specify location and combination of these devices in the gas system. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US EAS 334: 2013, List by category of cosmetic products | This Uganda Standard lays down the list of products that are classified as cosmetics. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 334: 2013, List by category of cosmetic products | This Uganda Standard lays down the list of products that are classified as cosmetics. (This Uganda Standard cancels and replaces US 442-1:2002, Illustrative list by category of cosmetic products, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US EAS 386:2005, Used footwear ― Inspection and acceptance criteria ― Code of practice | This Uganda Standard prescribes a Code of Practice for the inspection and acceptance criteria for used footwear. This standard applies to used footwear of all types and sizes irrespective of their intended end use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 356:2004, Code of practice for inspection and acceptance criteria for used textile products | This Uganda Standard prescribes a code of practice for the inspection and acceptance criteria for used textile products. It also applies to used garments of all types, sizes and fibre composition | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-3:2002, Polishes — Specification — Part 3: Floor polish water emulsion buffable type | This Uganda Standard prescribes requirements and methods of test for water emulsion floor polish buffable type. This standard applies to a buffable water emulsion floor polish for general application on vinyl, thermoplastic, linoleum, rubber vinyl asbestos, asphalt terrazo, marble, cured concentrate ceramic and quarry tiles. It shall not be used on wooded, cork or magnesite floors unless these are properly sealed. Floor polish in this specification is for polishes used on floor areas that are subjected to heavy abraise foot traffic and any areas where buffing is desired. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 377-1: 2013, Cosmetics and cosmetic products — Part 1: List of substances prohibited in cosmetic products | This Uganda Standard prescribes the chemical name, state and formulation under which specific use as substance is prohibited in the cosmetic products. This standard applies only to cosmetic products and not to medicinal products, medical devices or biocidal products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 377-1: 2013, Cosmetics and cosmetic products — Part 1: List of substances prohibited in cosmetic products | This Uganda Standard prescribes the chemical name, state and formulation under which specific use as substance is prohibited in the cosmetic products. This standard applies only to cosmetic products and not to medicinal products, medical devices or biocidal products. (This Uganda Standard cancels and replaces US 442-2:2002, Cosmetics — List of substances which must not form part of the composition of any cosmetic product, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 377-3: 2013, Cosmetics and cosmetic products — Part 3: List of colorants allowed in cosmetic products | This Uganda Standard prescribes the list of colorants allowed in cosmetic products. This standard includes the salts and flakes of substances and when a colorant is expressed as a specific salt, its other salts and flakes shall also be included. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 377-3: 2013, Cosmetics and cosmetic products — Part 3: List of colorants allowed in cosmetic products | This Uganda Standard prescribes the list of colorants allowed in cosmetic products. This standard includes the salts and flakes of substances and when a colorant is expressed as a specific salt, its other salts and flakes shall also be included. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 377-4: 2013, Cosmetics and cosmetics products — Part 4: List of preservatives allowed in cosmetic products | This Uganda Standard prescribes the list of preservatives allowed in cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 377-4: 2013, Cosmetics and cosmetics products — Part 4: List of preservatives allowed in cosmetic products | This Uganda Standard prescribes the list of preservatives allowed in cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 377-2: 2013, Cosmetics and cosmetic products — Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down | This Uganda Standard prescribes the list of substances which cosmetic products must not contain except subject to the restrictions laid down. This standard applies only to cosmetic products and not to medicinal products, medical devices or biocidal products. | 2015-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 377-2: 2013, Cosmetics and cosmetic products — Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down | This Uganda Standard prescribes the list of substances which cosmetic products must not contain except subject to the restrictions laid down. This standard applies only to cosmetic products and not to medicinal products, medical devices or biocidal products. (This Uganda Standard cancels and replaces US 442-3:2003, List of substances which cosmetics must not contain except subject to conditions applicable to drugs and conditions laid down, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 377-5: 2013, Cosmetics and cosmetic products — Part 5: List of UV filters allowed in cosmetic products | This Uganda Standard prescribes the list of UV filters allowed in cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
