English
FrançaisRegulations
Page 110 of 140, showing 20 records out of 2786 total, starting on record 2181, ending on 2200
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 60227-5:2011, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords) | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 | |
| US IEC 60227-6: 2001, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 6: Lift cables and cables for flexible connections | This Uganda Standard details the particular specifications for both circular and flat lift cables and cables for flexible connections of rated voltages up to and including 450/750 V. Each cable complies with the appropriate requirements given in US IEC 60227-1, and with the particular requirements of this part of US IEC 60227. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60227-7:2012, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 7: Flexible cables screened and unscreened with two or more conductors | This Uganda Standard details the particular specifications for polyvinyl chloride insulated, screened and unscreened control cables of rated voltages up to and including 300/500 V. All cables comply with the appropriate requirements given in US IEC 60227-1 and each individual type of cable complies with the particular requirements of this part. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-1: 2011, Primary batteries — General | This Uganda Standard is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. This standard specifies test methods for testing primary cells and batteries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-2: 2011, Primary batteries — Part 2: Physical and electrical specifications | This Uganda Standard is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions and the discharge test conditions and discharge performance requirements. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-3: 2011, Primary batteries — Part 3: Watch batteries | This Uganda Standard specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-4: 2007, Primary batteries — Part 4: Safety of lithium batteries | This Uganda Standard specifies tests and requirements for primary batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-5: 2011, Primary batteries — Part 5: Safety of batteries with aqueous electrolyte | This Uganda Standard specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US 1565:2014, Standard specification for water emulsion floor polish | This Uganda Standard covers floor polish intended for use on all non-wood floors and on sealed-wood floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US 307:2014, Mosquito nets — Specification (3RD Edition) | This Uganda Standard specifies requirements for long lasting insecticidal mosquito nets intended for malaria vector control. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1583:2014, Fishing nets —Specification | This Uganda Standard specifies requirements for fishing nets. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1575:2014, Spring mattresses — Specification | This Uganda Standard specifies requirements and test methods for spring mattresses intended for institutional and domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 203:2014, Boxes for enclosure of electrical accessories — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of test for boxes intended to contain one or more electrical accessories and to be recessed into a wall, ceiling or similar flat-surfaced structure. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 205:2014, Controls for heating units in household electric ranges — Specification (2nd Edition) | This Uganda Standard specifies the requirements and test methods for control units for household electric ranges. It applies to multi-heat switches, energy regulators and thermostats including those for ovens, hotplates and rotisseries. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 168:2014, Junction boxes for use in electrical installations — Specification (2nd Edition) | This Uganda Standard specifies requirements and methods of sampling and test for junction boxes of surface or flush mounting types for use in fixed wiring installations. This standard applies to junction boxes used in a.c. and d.c. circuits where the rated voltage does not exceed 250 V and where the conductors are not subject to mechanical tension in normal use. It covers junction boxes having fixed terminals with capacity for cable conductors up to 10 mm2. It does not apply to junction boxes for use in conditions where special protection against the ingress of dust or moisture is required. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-1: 2014, Code of practice for safety of electrical installations — Part 1: General | This Uganda Standard specifies the terms and definitions, symbols and methods of earthing of electrical supply, communication facilities and associated equipment. It applies to all new and existing installations and extensions. This standard does not cover the earthed return of electric railways nor those lightning protection wires that are normally independent of supply or communication wires or equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 704: 2014; Absorbent cotton wool — Specification | This Uganda Standard specifies requirements and methods of test for absorbent cotton (surgical cotton or cotton wool) wool for medical use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 811-2:2014, Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment | This Uganda Standard specifies the safety requirements for installations, operations and maintenance of electric supply stations. It also provides safety guidelines to personnel involved in electric supply stations and their associated structural arrangements that are accessible only to qualified personnel. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-3:2014, Code of practice for safety of electrical installations — Part 3 :Installation and maintenance of overhead electric supply and communication lines | This Uganda Standard specifies safety requirements for installation and maintenance of overhead electric supply and communication lines and their associated equipment. It prescribes the associated structural arrangements of such systems and the extension of such systems into buildings. It includes requirements for spacing, clearances, and strength of construction. This part of US EAS 811 does not apply to installations in electric supply stations except as required by US EAS 811-1. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-4:2014, Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines | This Uganda Standard specifies safety requirements for the installation and maintenance of underground electric supply and communication lines. It prescribes the associated structural arrangements and the extension of such systems into buildings. It also covers the cables and equipment employed primarily for the utilization of electric power when such cables and equipment are used by the utility in the exercise of its function as a utility. This standard does not apply for installations in electric supply stations. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
