English
FrançaisRegulations
Page 112 of 140, showing 20 records out of 2786 total, starting on record 2221, ending on 2240
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO/TS 16976-1:2015, Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of US ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: metabolic rates associated with various intensities of work; oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-6:2014, Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects | This Uganda Standard provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD. It specifies for the writers of RPD standards, principles relating to the interaction between RPD and the human physiological and psychological perception, the acceptance by the wearer, and the need for training to improve acceptance of the RPD by the wearer. This standard does not cover requirements related to the specific hazard for which the RPD is designed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 17078-4:2010, Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment | This Uganda Standard provides informative documentation to assist the user/purchaser and the supplier/manufacturer in specification, design, selection, testing, calibration, reconditioning, installation and use of side-pocket mandrels, flow-control devices and associated latches and installation tools. The product design and manufacturing-related requirements for these products are included within the other parts of US ISO 17078. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers | This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 22846-2:2012, Personal equipment for protection against falls — Rope access systems — Part 2: Code of practice | This Uganda Standard provides recommendations and guidance on the use of rope access methods for work at height and expands on the fundamental principles given in ISO 22846-1, in conjunction with which it is intended to be used. It is intended for use by employers, employees and self-employed persons who use rope access methods, by those commissioning rope access works and by rope access associations. This part of US ISO 22846 is applicable to the use of rope access methods in any situation where ropes are used as the primary means of access, egress or support and as the primary means of protection against a fall, on both man-made and natural features. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 14998:2013, Petroleum and natural gas industries — Downhole equipment — Completion accessories | This Uganda Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This Uganda Standard provides requirements for the functional specification and technical specifications including: design, design verification and validation, materials, documentation and data control, redress, repair, shipment, and storage. This standard covers the pressure containing, load bearing, disconnect/reconnect, tubing movement, and opening a port functionalities of completion accessories. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 14310:2008, Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs This Uganda Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas | This Uganda Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry. This International Standard provides requirements for the functional specification and technical specification, including design, design verification and validation, materials, documentation and data control, repair, shipment, and storage. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 17078-3:2009, Petroleum and natural gas industries — Drilling and production equipment — Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels | This Uganda Standard provides requirements and guidelines for running tools, pulling tools, kick-over tools and latches used for the installation and retrieval of flow control and other devices to be installed in side-pocket mandrels for use in the petroleum and natural gas industries. This includes requirements for specifying, selecting, designing, manufacturing, quality control, testing and preparation for shipping of these tools and latches. Additionally, it includes information regarding performance testing and calibration procedures | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO/TS 16530-2:2014, Well integrity — Part 2: Well integrity for the operational phase | This Uganda Standard provides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 9241-391:2016, Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures | This Uganda Standard provides requirements and recommendations for reducing photosensitive seizures (PSS), while viewing images on electronic displays. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 17078-1:2004, Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels | This Uganda Standard provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of US ISO 17078 includes specifying, selecting, designing, manufacturing, quality control, testing, and preparation for shipping of side-pocket mandrels. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 17078-2:2007, Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels | This Uganda Standard provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures | 2015-12-15 | The Uganda National Bureau of standards | STATUTORY INSTRUMENTS SUPPLEMENT No. 8 to The Uganda Gazette No. 15 Volume CI dated 14th March, 2008. | 18 August 2016 |
| 1128. US ISO 15136-2: 2006, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 2: Surface-drive systems | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface-drive systems for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of surface-drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15136-1: 2009, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 1: Pumps | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered by this part of US ISO 15136. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15551-1:2015, Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling, and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 13535:2000, Petroleum and natural gas industries — Drilling and production equipment — Hoisting equipment | This Uganda Standard provides requirements for the design, manufacture and testing of hoisting equipment suitable for use in drilling and production operations. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 11114-1:2012, Gas cylinders — Compatibility of cylinders and valve materials with gas contents — Part 1: Metallic materials | This Uganda Standard provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content. The compatibility data given is related to single gases and to gas mixtures. Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, liquefied and dissolved gases, are considered. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US 738:2015, General standard for contaminants and toxins in food and feed (4th Edition) | This Uganda Standard provides the main principles for dealing with contaminants and toxins in food and feed, and lists the maximum levels and associated sampling plans of contaminants and natural toxicants in food and feed. This standard includes only maximum levels of contaminants and natural toxicants in feed in cases where the contaminated feed can be transferred to food of animal origin and can be relevant to public health. (This standard cancels and replaces US 738:2012, General standard for contaminants and toxins in food and feed (3rd Edition) which has been technically revised). | 2015-08-07 | National Forest Authority | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment | This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 17824:2009, Petroleum and natural gas industries — Downhole equipment — Sand screens | This Uganda Standard provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, functional evaluation, manufacturing, storage and transport. The requirements of this standard are applicable to wire-wrap screens, pre-pack screens and metal-mesh screens as defined herein. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
