English
FrançaisRegulations
Page 111 of 140, showing 20 records out of 2786 total, starting on record 2201, ending on 2220
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 377-5: 2013, Cosmetics and cosmetic products — Part 5: List of UV filters allowed in cosmetic products | This Uganda Standard prescribes the list of UV filters allowed in cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US 1035:2013, Wood moisture meters — General provisions for verification methods and equipment | This Uganda Standard prescribes the methods, equipment and conditions for the initial and periodic verifications of wood moisture meters. This standard covers all moisture meters, irrespective of their principles of operation. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US EAS 383: 2013, Synthetic organic liquid detergent for household use — Specification | This Uganda Standard prescribes the requirements and methods of sampling and test for synthetic liquid detergents for household use both for general purpose and dishwashing liquid detergent. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 23 November 2016 |
| US EAS 383: 2013, Synthetic organic liquid detergent for household use — Specification | This Uganda Standard prescribes the requirements and methods of sampling and test for synthetic liquid detergents for household use both for general purpose and dishwashing liquid detergent. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 26 April 2017 |
| US EAS 122:1999, Sulfuric acid — Specification | This Uganda Standard prescribes the requirements and the methods of sampling and test for sulfuric acid. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 361:2004, Carbaryl dusting powders — Specification | This Uganda Standard prescribes the requirements and the methods of test for carbaryl dusting powders. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 20712-1:2008, Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in workplaces and public areas | This Uganda Standard prescribes water safety signs intended for use in connection with the aquatic environment. It is intended for use by owners and operators of aquatic environments and by manufacturers of signs and equipment. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO/TS 16901:2015, Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | This Uganda Standard provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 18788:2015, Management system for private security operations — Requirements with guidance for use | This Uganda Standard provides a framework for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the management of security operations. It provides the principles and requirements for a security operations management system (SOMS). This standard provides a business and risk management framework for organizations conducting or contracting security operations and related activities and functions while demonstrating: a) conduct of professional security operations to meet the requirements of clients and other stakeholders; b) accountability to law and respect for human rights; c) consistency with voluntary commitments to which it subscribes. This standard is applicable to any organization that needs to: a) establish, implement, maintain and improve an SOMS; b) assess its conformity with its stated security operations management policy; c) demonstrate its ability to consistently provide services that meet client needs and are in conformance with applicable laws and human rights requirements. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 24505:2016, Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision | This Uganda Standard provides a method for creating conspicuous colour combinations for use in visual signs and displays taking into account viewer age. It is based on the perceived similarity of colours at photopic and mesopic lighting conditions. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10427-2:2004, Petroleum and natural gas industries — Equipment for well cementing — Part 2: Centralizer placement and stop-collar testing | This Uganda Standard provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 14693:2003, Petroleum and natural gas industries — Drilling and wellservicing equipment | This Uganda Standard provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of this standard | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 13880:1999, Petroleum and natural gas industries —Content and drafting of a technical specification | This Uganda Standard provides guidance for the content and drafting of a technical specification in order to ensure that all technical requirements of a product, process or service are included and can be verified as complying with specified performance requirements, such as may be specified in a functional specification (see US ISO 13879). | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15663-2:2001, Petroleum and natural gas industries —Life-cycle costing —Part 2:Guidance on application of methodology and calculation methods | This Uganda Standard provides guidance on application of the methodology for life-cycle costing for the development and operation of facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 also provides guidance on the application and calculations of the life-cycle costing process defined in US ISO 15663-1. This part of US ISO 15663 is not concerned with determining the life-cycle cost of individual items of equipment, but rather with life-cycle costing in order to estimate the cost differences between competing project options. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 13879:2015, Petroleum and natural gas industries — Content and drafting of a functional specification | This Uganda Standard provides guidance on the content and drafting of a functional specification. A functional specification may not be necessary if a user/purchaser wishes to obtain a known standard product, process or service manufactured/supplied to a recognized standard. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 17348:2016, Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment | This Uganda Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this standard. This standard only considers materials compatibility with the environment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15663-3:2001, Petroleum and natural gas industries —Life-cycle costing —Part 3: Implementation guidelines | This Uganda Standard provides guidelines for the implementation of life-cycle costing for the development and operation of the facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 is applicable when making decisions on any option which has cost implications for more than one cost element or project phase. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO/TS 16976-5:2013, Respiratory protective devices — Human factors — Part 5: Thermal effects | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. It contains information related to thermal effects of respiratory protective devices on the human body, in particular: temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; thermal effects of breathing gas temperatures on lung airways and tissues; effects of breathing gas temperature and humidity on respiratory heat exchange; effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women aged between 20 and 60 years. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-2:2015, Respiratory protective devices — Human factors — Part 2: Anthropometrics | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for: anthropometric measurement methods; anthropometric data for head, face, and neck dimensions; anthropometric data for torso dimensions; human test panels; models of headforms | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
