English
FrançaisRegulations
Page 122 of 140, showing 20 records out of 2786 total, starting on record 2421, ending on 2440
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification | This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 17249:2013, Safety footwear with resistance to chain saw cutting | This Uganda Standard specifies requirements for safety footwear with resistance to chain saw cutting. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 2503:2009, Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa | This Uganda Standard specifies requirements for single or two-stage pressure regulators without flow metering devices for connection to gas cylinders used for compressed gases up to 300 bar 1) (30 MPa),dissolved acetylene,liquefied petroleum gases (LPG),methylacetylene-propadiene mixtures (MPS), andcarbon dioxide (CO2),for use in welding, cutting and allied processes. It does not cover pressure regulators having a nominal outlet pressure p2 > 20 bar. This standard also specifies requirements for single or two-stage pressure regulators with flow metering devices for connection to gas cylinders used for compressed gases or mixtures up to 300 bar (30 MPa), and carbon dioxide (CO2), for use in welding, cutting and allied processes. This standard does not cover pressure regulators intended for direct use on cylinder bundles. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US 833-3:2013, Sawn softwood timber — Part 3: Industrial timber — Specification | This Uganda Standard specifies requirements for six grades of timber intended for industrial use. This standard does not apply timber intended for structural use. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 1436:2009, Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from to −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US 970-2:2012, Agglomerated stone-slabs and cut-to-size product — Part 2: Product requirements | This Uganda Standard specifies requirements for slabs and cut-to-size product of agglomerated stone which are made for use as vanity, kitchen tops and other similar uses in furnishing and modular tiles of agglomerated stone which are made for use as flooring and stairs for internal and external uses, fixed by mortar or adhesives. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US 970-2:2012, Agglomerated stone-slabs and cut-to-size product — Part 2: Product requirements | This Uganda Standard specifies requirements for slabs and cut-to-size product of agglomerated stone which are made for use as vanity, kitchen tops and other similar uses in furnishing and modular tiles of agglomerated stone which are made for use as flooring and stairs for internal and external uses, fixed by mortar or adhesives. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |
| US 1619:2015, Fresh tangerine – Specification | This Uganda Standard specifies requirements for tangerines (Citrus tangerina hort. ex Tanaka) grown to be supplied fresh in the export and local markets. This standard does not apply to tangerine for industrial processing. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US ISO 5822:1988, Spot welding equipment — Taper plug gauges and taper ring gauges | This Uganda Standard specifies requirements for taper plug and ring gauges used for the checking of type A, B and C tapers according to US ISO 1089. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US 1612:2015, Fresh mushroom – Specification | This Uganda Standard specifies requirements for the carpophores (fruiting bodies) of strains grown from the genus Agaricus (syn. Psalliota) to be supplied fresh to the consumer. This standard does not apply to mushrooms for industrial processing. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US ISO 22727:2007, Graphical symbols — Creation and design of public information symbols — Requirements | This Uganda Standard specifies requirements for the creation and design of public information symbols. It specifies requirements for the design of public information symbols for submission for registration as approved public information symbols, including line width, the use of graphical symbol elements and how to indicate negation. It also specifies templates to be used in the design of public information symbols. It is for use by all those involved in the commissioning and the creation and design of public information symbols. This standard is not applicable to safety signs, including fire safety signs, or to traffic signs for use on the public highway. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification | This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 10424-1:2004, Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements | This Uganda Standard specifies requirements for the following drill stem elements: upper and lower Kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US EAS 346: 2013, Labelling of cosmetics — General requirements | This Uganda Standard specifies requirements for the labelling of cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 346: 2013, Labelling of cosmetics — General requirements | This Uganda Standard specifies requirements for the labelling of cosmetic products. (This Uganda Standard cancels and replaces US 484:2007, Labelling of cosmetic products — General requirements, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US 1028:2013, Labelling requirements for prepackaged products (2nd Edition) | This Uganda Standard specifies requirements for the labelling of prepackaged products with constant nominal content with respect to the identity of the product, the name and place of business of the manufacturer, packer, distributor, importer or retailer and the net quantity of the product. This standard does not apply to the labeling of prepackaged foods for which a separate standard applies. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US EAS 803:2014, Nutrition labelling — Requirements | This Uganda Standard specifies requirements for the nutrition labelling of foods. The standard applies to the nutrition labeling of all foods except for foods for special dietary uses. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
| US ISO 13847: 2013, Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines | This Uganda Standard specifies requirements for the petroleum, petrochemical and natural gas industries, for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems which meet the requirements of US ISO 13623 or equivalent. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification | This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification | This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use. (This Uganda Standard cancels and replaces US 663:2006, Pre-painted metal coated steel sheets and coils — Specification, which has been technically revised and republished) | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
