English
FrançaisRegulations
Page 124 of 140, showing 20 records out of 2786 total, starting on record 2461, ending on 2480
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6742-2:2015, Cycles — Lighting and retroreflective devices — Part 2:Retroreflective devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-3:2015, Cycles — Lighting and retroreflective devices — Part 3:Installation and use of lighting and retro-reflective devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-4:2015, Cycles — Lighting and retroreflective devices — Part 4: Lighting systems powered by the cycle’s movement | This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems powered by the cycle’s movement. It applies to light devices complying with US ISO 6742-1. Lighting systems include lighting devices and power supplied by cycle's movement such as generator. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 10 August 2016 |
| US ISO 6742-5:2015, Cycles — Lighting and retroreflective devices — Part 5: Lighting systems not powered by the cycle’s movement | systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems not powered by the cycle’s movement. It applies to light devices complying with ISO 6742-1. Lighting systems include lighting devices and power not supplied by cycle’s movement such as battery. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 10 August 2016 |
| US ISO 8098:2014, Cycles — Safety requirements for bicycles for young children | This Uganda Standard specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 10 August 2016 |
| US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers | This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10427-2:2004, Petroleum and natural gas industries — Equipment for well cementing — Part 2: Centralizer placement and stop-collar testing | This Uganda Standard provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10431:1993, Petroleum and natural gas industries — Pumping units — Specification | This Uganda Standard lays down specification covering the design and rating of pumping units. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-1:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements | This Uganda Standard specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of US ISO 10438 is intended to be used in conjunction with US ISO 10438-2, US ISO 10438-3 or US ISO 10438-4, as appropriate. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-2:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems | This Uganda Standard, in conjunction with of US ISO 10438-1, specifies requirements for oil systems for special purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-3:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil systems | This Uganda Standard, in conjunction with US ISO 10438-1, specifies requirements for oil systems for general purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-4:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4:Self-acting gas seal support systems | This Uganda Standard in conjunction with US ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10439-1:2015, Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander compressors ⎯ Part 1: General requirements | This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies general requirements applicable to all such machines. This standard does not apply to fans or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. This standard also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors. Hot gas expanders over 300 °C (570 °F) are not covered by this standard. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10439-2:2015, Petroleum, chemical and gas service industries ⎯ Axial and centrifugal compressors and expander compressors ⎯ Part 2: Non-integrally geared centrifugal and axial compressors | This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in US ISO 10439-1. These machines do not have gears integral with their casing but can have external gears. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13623: 2009, Petroleum and natural gas industries — Pipeline transportation systems | This Uganda Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13680:2010, Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions | This Uganda Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13706:2011, Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers | This Uganda Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13707:2000, Petroleum and natural gas industries ⎯ Reciprocating compressors | This Uganda Standard covers the minimum requirements for reciprocating compressors and their drivers used in the petroleum and natural gas industries with either lubricated or no lubricated cylinders. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13709:2009, Centrifugal pumps for petroleum, petrochemical and natural gas industries | This Uganda Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This standard is applicable to overhung pumps, between-bearings pumps and vertically suspended pumps. Clause 9 provides requirements applicable to specific types of pump. All other clauses of this standard are applicable to all pump types. Illustrations are provided of the various specific pump types and the designations assigned to a specific type. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13710: 2004, Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps | This Uganda Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
