English
FrançaisRegulations
Page 125 of 140, showing 20 records out of 2786 total, starting on record 2481, ending on 2500
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6361-1:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat-rolled products with a thickness over 0.15 mm up to and including 400 mm. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-2:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips, and plates for general engineering applications. It applies to flat-rolled products. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-3:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy strip by cold-rolling for general engineering applications. It applies to products with thickness of over 0.15 mm up to, and including 16 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock), or to special products such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-4:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet and plate by hot-rolling or cold-rolling for general engineering applications. It applies to products with a thickness over 0,15 mm up to and including 203 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products, such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-5:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-1:2012, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products. | 2016-08-12 | National Forest Authority | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of the following: • wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; • wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | 03 September 2016 | |
| US ISO 6362-7:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6425:1996, Divers’ watches | This Uganda Standard specifies requirements and test methods for divers’ watches and for divers’ watches for use in deep diving. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6465:2009, Spices – Cumin (Cuminum cyminum L.) – Specification (2nd Edition) | This Uganda Standard specifies requirements for fruits of cumin (Cuminum cyminum L.) | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6539:2014, Cinnamon (Cinnamomum zeylanicum Blume) – Specification (2nd Edition) | This Uganda Standard specifies requirements for whole or ground (powdered) cinnamon, of the Sri Lankan, Madagascan and Seychelles types obtained from the bark of the tree or shrub Cinnamomum zeylanicum Blume. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6698:1989, Cycles — Screw threads used to assemble freewheels on bicycle hubs | This Uganda Standard specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. It is based on the use of the ISO basic thread profile given in ISO 68; satisfactory interchangeability with the corresponding British Standard Cycle (B.S.C.) thread; this has required the use of an inch pitch (t.p.i.);the use of screw thread tolerance grades and tolerance positions given in ISO 965-l1; and the use of gauges made to ISO 1502. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 6699:1990, Cycles — Stern and handlebar bend — Assembly dimensions | This Uganda Standard specifies the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend of a bicycle. lt applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. lt does not apply to specialized types of bicycle such as tradesmen’s delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 669:2000, Resistance welding — Resistance welding equipment — Mechanical and electrical requirements | This Uganda Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete movable welding equipment. The following types are included: • single-phase equipment with alternating welding current; • single-phase equipment with rectified welding current by rectification of the output of the welding transformer; • single-phase equipment with inverter welding transformer; • three-phase equipment with rectified welding current by rectification of the output of the welding transformer; • three-phase equipment with a current rectification in the input of the welding transformer (sometimes called frequency convertor); and • three-phase equipment with inverter welding transformers. This standard applies neither to welding transformers sold separately nor to safety requirements | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 |
