English
FrançaisRegulations
Page 126 of 140, showing 20 records out of 2786 total, starting on record 2501, ending on 2520
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 811-4:2014, Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines | This Uganda Standard specifies safety requirements for the installation and maintenance of underground electric supply and communication lines. It prescribes the associated structural arrangements and the extension of such systems into buildings. It also covers the cables and equipment employed primarily for the utilization of electric power when such cables and equipment are used by the utility in the exercise of its function as a utility. This standard does not apply for installations in electric supply stations. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 5172:2006, Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications | This Uganda Standard specifies specifications for blowpipes for gas welding, heating and cutting of metals. It applies to manual blowpipes for welding and heating with a nominal thermal power up to 32 000 kcal/h, and manual and machine cutting blowpipes with a cutting range up to 300 mm. This standard does not apply to air-aspirated blowpipes which are covered in US ISO 9012. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6935-3:1992, Steel for the reinforcement of concrete — Part 3: Welded fabrics | This Uganda Standard specifies technical requirements for factory made sheets or rolls of welded fabric, manufactured from steel wires or bars with diameters from 4 mm to 16 mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of pre-stressed concrete structures. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US ISO 6935-3:1992, Steel for the reinforcement of concrete — Part 3: Welded fabrics | This Uganda Standard specifies technical requirements for factory made sheets or rolls of welded fabric, manufactured from steel wires or bars with diameters from 4 mm to 16 mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of pre-stressed concrete structures. (This Uganda Standard cancels and replaces US EAS 412-3:2005, Steel for the reinforcement of concrete — Part 3: Welded fabric, which has been republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars | This Uganda Standard specifies technical requirements for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars | This Uganda Standard specifies technical requirements for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. (This Uganda Standard cancels and replaces US 155-1:2003, Specification for steel bars for reinforcement of concrete — Plain bars, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US EAS 412-2:2013, Steel for the reinforcement of concrete — Part 2: Ribbed bars | This Uganda Standard specifies technical requirements for ribbed bars to be used as reinforcement in concrete. This part of US EAS 412 covers six steel grades not intended for welding (B400A-R, B400B-R, B400C-R, B500A-R, B500B-R and B500C-R), and nine steel grades (B400AWR, B400BWR, B400CWR, B400DWR, B420DWR, B500AWR, B500BWR, B500CWR and B500DWR) intended for welding. The steel grades are designated with steel names allocated in accordance with ISO/TS 4949. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 412-2:2013, Steel for the reinforcement of concrete — Part 2: Ribbed bars | This Uganda Standard specifies technical requirements for ribbed bars to be used as reinforcement in concrete. This part of US EAS 412 covers six steel grades not intended for welding (B400A-R, B400B-R, B400C-R, B500A-R, B500B-R and B500C-R), and nine steel grades (B400AWR, B400BWR, B400CWR, B400DWR, B420DWR, B500AWR, B500BWR, B500CWR and B500DWR) intended for welding. The steel grades are designated with steel names allocated in accordance with ISO/TS 4949. (This Uganda Standard cancels and replaces US 155-2:2003, Specification for steel bars for reinforcement of concrete — Ribbed bars, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 18158:2016, Workplace air – Terminology | This Uganda Standard specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or are specific to physical and chemical processes of air sampling, the analytical method, or method performance. The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US IEC 60086-4: 2007, Primary batteries — Part 4: Safety of lithium batteries | This Uganda Standard specifies tests and requirements for primary batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US IEC 60086-5: 2011, Primary batteries — Part 5: Safety of batteries with aqueous electrolyte | This Uganda Standard specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 10 September 2016 |
| US ISO 8124-1:2007, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 825:2014, Groundnut seed — Requirements for certification | This Uganda Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of groundnut (Arachis hypogaea L.). It includes requirements for eligible varieties, field standards, field inspections, seed sampling, laboratory standards, certificates, packaging and labelling, and post-control tests. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US EAS 821:2014, Maize seed – Requirements for certification | This Uganda Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of maize (Zea mays L.). It includes requirements for eligible varieties, field standards, field inspections, seed sampling, laboratory standards, certificates, packaging and labelling and post-control tests. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US EAS 822:2014, Sorghum seed – Requirements for certification | This Uganda Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of sorghum (Sorghum bicolor (L.) Moench). It includes requirements for eligible varieties, field standards, field inspections, seed sampling, laboratory standards, certificates, packaging and labeling, and post control tests. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US EAS 824:2014, Soybean seed — Requirements for certification | This Uganda Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of soybean (Glycine max (L.) Merrill). It includes requirements for eligible varieties, field standards, field inspections, seed sampling, laboratory standards, certificates, packaging and labelling, and post-control tests. | 2015-08-07 | The Uganda National Bureau of standards | 22 August 2016 | |
| US EAS 823:2014, Sunflower seed – Requirements for certification | This Uganda Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of sunflower (Helianthus annuus L.). It includes requirements for eligible varieties, field standards, field inspections, seed sampling, laboratory standards, certificates, packaging and labelling, and post-control tests. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US ISO 26986:2010, Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification | This Uganda Standard specifies the characteristics of floor coverings based on expanded (cushioned) poly (vinyl chloride), supplied as either tiles or rolls. This standard includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 5182:2008, Resistance welding — Materials for electrodes and ancillary equipment | This Uganda Standard specifies the characteristics of materials for resistance welding electrodes and ancillary equipment which are used for carrying current and transmitting force to the work. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
