English
FrançaisRegulations
Page 136 of 140, showing 20 records out of 2786 total, starting on record 2701, ending on 2720
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 8029:2007, — General-purpose collapsible water hose, textile reinforced — Specification | This Uganda Standard specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of−10 °C to +55 °C. Such hoses are classified into four types, as follows:low pressure, designed for a maximum working pressure of up to 4,0 bar at 23 °C and up to 2,0 bar at 55 °C;medium pressure, for a maximum working pressure of up to 7,0 bar at 23 °C and up to 3,6 bar at 55 °C;high pressure, for a maximum working pressure of up to 10,0 bar at 23 °C and up to 5,1 bar at 55 °C; andextra-high pressure, for a maximum working pressure of up to 15,5 bar at 23 °C and up to 7,9 bar at 55 °C.This standard does not apply to products used for fire-fighting or the conveyance of drinking water | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 8028:1999, Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification | This Uganda Standard specifies the requirements for four types, differentiated by burst pressure and temperature of use, of elastomeric hose and hose assembly for use in airless paint spraying. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification | This Uganda Standard specifies the requirements for general-purpose textile reinforced thermoplastics water-discharge hoses. Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:ambient temperatures: −10 °C to +60 °C; and water temperature during operation: 0 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 9312:2013, Resistance welding equipment — Insulated pins for use in electrode back-ups | This Uganda Standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment, or other live equipment, which need to be insulated from each other. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US EAS 798:2013, Lipid food supplements – Requirements | This Uganda Standard specifies the requirements for lipid food supplements used for complementing the normal diet with essential fatty acids. This standard covers lipid food supplements primarily providing essential fatty acids and presented in forms such as capsules, paste or liquid. The product may be taken directly or added to another food with the primary objective of increasing the energy content of the food and provide essential fatty acids. This standard does not cover lipid food supplements intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 798:2013, Lipid food supplements – Requirements | This Uganda Standard specifies the requirements for lipid food supplements used for complementing the normal diet with essential fatty acids. This standard covers lipid food supplements primarily providing essential fatty acids and presented in forms such as capsules, paste or liquid. The product may be taken directly or added to another food with the primary objective of increasing the energy content of the food and provide essential fatty acids. This standard does not cover lipid food supplements intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 4261:2013, Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications | This Uganda Standard specifies the requirements for petroleum fuels for gas turbines (see ISO 3977) used in public utility, industrial, and marine applications. It does not cover requirements for gas turbine fuels for aviation use. This standard is intended for the guidance of users such as turbine manufacturers, suppliers, and purchasers of gas turbine fuels. This standard sets out the properties of fuels at the time and place of transfer of custody to the user. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 8217:2012, Petroleum products — Fuels (class F) — Specifications of marine fuels | This Uganda Standard specifies the requirements for petroleum fuels for use in marine diesel engines and boilers, prior to appropriate treatment before use. The specifications for fuels in this standard can also be applicable to fuels for stationary diesel engines of the same or similar make and type as those used for marine purposes. This standard specifies four categories of distillate fuel, one of which is for diesel engines for emergency purposes. It also specifies six categories of residual fuel. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 21809-4:2009, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE) | This Uganda Standard specifies the requirements for qualification, application, inspection, testing, handling and storage of materials for plant application of two-layer polyethylene coatings (2-layer PE) applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 21809-2:2014, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings | This Uganda Standard specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 21809-5:2010, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings | This Uganda Standard specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. The external application of concrete is primarily used for the negative buoyancy of pipes used in buried or submerged pipeline systems and/or for the mechanical protection of the pipe and its pre-coating. This part of US ISO 21809 is applicable to concrete thicknesses of 25 mm or greater. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 3861:2005, Rubber hoses for sand and grit blasting — Specification | This Uganda Standard specifies the requirements for rubber hoses for wet and dry sand and grit blasting, suitable for use up to a maximum working pressure of 6,3 bar and over an operating temperature range of −25 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 8066-2:2001, Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 2: Refrigerant 134a | This Uganda Standard specifies the requirements for rubber or thermoplastic hoses and hose assemblies used for circulating liquid and gaseous R134a (tetrafluoroethane) in the air-conditioning systems of automobiles. The hoses and hose assemblies are designed in such a way as to restrict losses of refrigerant and contamination of the system. The operational temperature range is 40 °C to +125 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US 1039:2013, Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological requirements | This Uganda Standard specifies the requirements for speedometers, mechanical odometers and chronotachographs for motor vehicles. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US EAS 196:2013, High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification | This Uganda Standard specifies the requirements for steel sheet in coils and cut lengths. It applies to the carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet. This standard is not applicable to hot-rolled, heavy-thickness carbon sheet coils. In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of the general specification. For the purposes of determining conformance with this specification and the various material specifications, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 196:2013, High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification | This Uganda Standard specifies the requirements for steel sheet in coils and cut lengths. It applies to the carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet. This standard is not applicable to hot-rolled, heavy-thickness carbon sheet coils. In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of the general specification. For the purposes of determining conformance with this specification and the various material specifications, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 4081:2010, Rubber hoses and tubing for cooling systems for internal combustion engines — Specification | This Uganda Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internal combustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 6807:2003, Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification | This Uganda Standard specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This standard applies to hoses which are suitable for use at ambient temperatures between − 20 °C and + 52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This standard does not apply to hoses which are intended for use with gases.. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 7989-2:2007, Steel wire and wire products — Nonferrous metallic coatings on steel wire — Part 2: Zinc or zinc-alloy coating | This Uganda Standard specifies the requirements for the coating mass per unit area, for other properties and also for testing of zinc or zinc-alloy coatings on steel wire and steel wire products, of circular or other section. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US ISO 7989-2:2007, Steel wire and wire products — Nonferrous metallic coatings on steel wire — Part 2: Zinc or zinc-alloy coating | This Uganda Standard specifies the requirements for the coating mass per unit area, for other properties and also for testing of zinc or zinc-alloy coatings on steel wire and steel wire products, of circular or other section. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
