English
FrançaisRegulations
Page 137 of 140, showing 20 records out of 2786 total, starting on record 2721, ending on 2740
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 15465:2004, Pipework — Stripwound metal hoses and hose assemblies | This Uganda Standard specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum allowable pressures of up to 40 bar. These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 1403:2005, Rubber hoses, textile-reinforced, for general-purpose water applications — Specification | This Uganda Standard specifies the requirements for three types of general-purpose textile-reinforced rubber water hose with an operating temperature range of −25 °C to +70 °C and a maximum working pressure of up to 25 bar.These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as firefighting hoses, for special agricultural machines or as collapsible water hoses. These hoses may be used with additives which lower the freezing point of water | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 3994:2007, Plastics hoses — Helical-thermoplastic reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification | This Uganda Standard specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from − 10 °C to + 55 °C. The three types of hose are for light-, medium- and heavy-duty applications. The types of hoses covered in this standard are not intended for use with flammable or combustible materials, nor with aromatic solvents | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 5772:1998, Rubber hoses and hose assemblies for measured fuel dispensing — Specification | This Uganda Standard specifies the requirements for three types of rubber hose and hose assembly used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15 % oxygenated compounds). The three types of hose are as follows:type 1: hoses with textile reinforcement suitable for reeling on a drum or hanging in bends;type 2: hoses with textile and helical wire reinforcement designed for torsional flexibility, suitable for coiling, reeling on a drum or hanging in bends; and type 3: hoses with fine wire reinforcement designed for low dilation, suitable for reeling on a drum or hanging in bends. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6804:2009, Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification | This Uganda Standard specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).It is applicable to the following types of hose: Type 1: rubber hoses for unheated water supply (maximum temperature 70 °C).Type 2: rubber hoses for heated water supply (maximum temperature 90 °C).Type 3: plastics hoses for unheated water supply (maximum temperature 60 °C). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 2398:2006, Rubber hoses, textile-reinforced, for compressed air — Specification | This Uganda Standard specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 25 bar with an operating-temperature range of – 40 °C to + 70 °C, depending on the type and category | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 2929:2014, Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification | This Uganda Standard specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa). Both groups of hoses are designed for: • use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds; and • operation within the temperature range of − 30 °C to + 70 °C, undamaged by climatic conditions of − 50 °C to + 70 °C when stored in static conditions. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US EAS 797:2013, Vitamin and mineral food supplements – Requirements | This Uganda Standard specifies the requirements for vitamin and mineral food supplements intended for use in supplementing the daily diet with vitamins and/or minerals. This standard covers vitamin and mineral food supplements in concentrated forms of those nutrients singly or in combinations, marketed in forms such as capsules, tablets, powders, paste and solutions. This standard does not cover vitamin and mineral products intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 797:2013, Vitamin and mineral food supplements – Requirements | This Uganda Standard specifies the requirements for vitamin and mineral food supplements intended for use in supplementing the daily diet with vitamins and/or minerals. This standard covers vitamin and mineral food supplements in concentrated forms of those nutrients singly or in combinations, marketed in forms such as capsules, tablets, powders, paste and solutions. This standard does not cover vitamin and mineral products intended for special dietary uses or medical/therapeutic purposes. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US ISO 1728:2006, Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability | This Uganda Standard specifies the requirements which ensure interchangeability of the pneumatic braking connections between motor vehicles and towed vehicles. It concerns vehicle combinations equipped with pneumatic braking systems with two lines: one control line and one supply line. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 766-2: 2013, Antibacterial toilet soap — Specification ― Part 2: Liquid | This Uganda Standard specifies the requirements, and methods of sampling and test for liquid antibacterial toilet soap. It includes antibacterial (bacteriostatic) and antifungal (fungal static). This standard does not cover synthetic hand wash liquid detergents, shampoo and products for specific purposes such as those for industrial and surgical uses. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 23 November 2016 |
| US EAS 766-2: 2013, Antibacterial toilet soap — Specification ― Part 2: Liquid | This Uganda Standard specifies the requirements, and methods of sampling and test for liquid antibacterial toilet soap. It includes antibacterial (bacteriostatic) and antifungal (fungal static). This standard does not cover synthetic hand wash liquid detergents, shampoo and products for specific purposes such as those for industrial and surgical uses. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 26 April 2017 |
| US EAS 337: 2013, Henna powder — Specification | This Uganda Standard specifies the requirements, and methods of sampling and test for pure henna powder. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
| US EAS 337: 2013, Henna powder — Specification | This Uganda Standard specifies the requirements, and methods of sampling and test for pure henna powder. (This Uganda Standard cancels and replaces US 507:2003 Specification for henna powder, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
| US 1598:2015, Alcoholic beverages —Ready to Drink (RTD) — Specification | This Uganda Standard specifies the requirements, method of sampling and test for Ready to Drink alcoholic beverages (RTD). | 2015-08-07 | National Forest Authority | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
| US EAS 756:2013, Pigeon peas – Specification (2nd Edition) | This Uganda Standard specifies the requirements, methods of sampling and test for dry pigeon peas of the varieties (cultivars) grown from Cajanus cajan Linn. intended for human consumption. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
| US EAS 756:2013, Pigeon peas – Specification (2nd Edition) | This Uganda Standard specifies the requirements, methods of sampling and test for dry pigeon peas of the varieties (cultivars) grown from Cajanus cajan Linn. intended for human consumption. (This Uganda Standard cancels and replaces US EAS 756:2011, Pigeon peas – Specification, which has been technically revised). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 05 April 2017 |
| US 1511:2014, Oxygen for medical use — Specification | This Uganda Standard specifies the requirements, methods of sampling and test requirements for oxygen for medical use only. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1624-1:2015, Hair shampoo — Part 1: Synthetic detergent-based — Specification | This Uganda Standard specifies the requirements, methods of test and sampling for hair shampoo, synthetic detergent-based. This standard also includes shampoos with positive dermatological effect on the skin and neutralizing shampoos | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US 1625:2015, Acid based instant hand sanitizers— Specification | This Uganda Standard specifies the requirements, sampling and test methods for acid based instant sanitizers. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
