Regulations
Page 18 of 140, showing 20 records out of 2786 total, starting on record 341, ending on 360
Title | Description | Implementation date | Source | Publication | Created |
---|---|---|---|---|---|
US ISO 3949:2009, Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification | This Uganda Standard specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
US ISO 1401:1999, Rubber hoses for agricultural spraying | This Uganda Standard specifies requirements for three types of flexible rubber hose for pressure spraying of agropharmaceutical and/or fertilizer products within a temperature range of –10 °C to + 60 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
US ISO 13363:2004, Rubber and plastics hoses for marine engine wet-exhaust systems — Specification | This Uganda Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water).The three types are:type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; andtype 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.The two classes are:class A intended for diesel engines; andclass B intended for petrol engines, and for diesel engines with a very high exhaust temperature | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
US 833-2:2013, Sawn softwood timber — Part 2: Stress-graded structural timber and timber for frame wall construction — Specification | This Uganda Standard specifies requirements for three stress grades of visually graded structural timber and three stress grades of mechanically graded structural timber (including finger-jointed structural timber). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 805:2014, Use of nutrition and health claims — Requirements | This Uganda Standard specifies requirements for the use of nutrition and health claims in food labelling and in advertising. This standard applies to all foods for which nutrition and health claims are made without prejudice to specific provisions under other standards or guidelines relating to foods for special dietary uses and foods for special medical purposes. These requirements for nutrition and health claims do not apply to foods for infants and young children. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
US ISO 20712-2:2007, Water safety signs and beach safety flags — Part 2: Specifications for beach safety flags — Colour, shape, meaning and performance | This Uganda Standard specifies requirements for the shape and colour of beach safety flags for the management of activities on coastal and inland beaches, to be used for giving information on wind and water conditions and other hazardous conditions, and to indicate the location of swimming and other aquatic activity zones extending from the beach into the water. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification | This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use. (This Uganda Standard cancels and replaces US 663:2006, Pre-painted metal coated steel sheets and coils — Specification, which has been technically revised and republished) | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification | This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 02 November 2016 |
US ISO 13847: 2013, Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines | This Uganda Standard specifies requirements for the petroleum, petrochemical and natural gas industries, for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems which meet the requirements of US ISO 13623 or equivalent. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
US EAS 803:2014, Nutrition labelling — Requirements | This Uganda Standard specifies requirements for the nutrition labelling of foods. The standard applies to the nutrition labeling of all foods except for foods for special dietary uses. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 07 September 2016 |
US 1028:2013, Labelling requirements for prepackaged products (2nd Edition) | This Uganda Standard specifies requirements for the labelling of prepackaged products with constant nominal content with respect to the identity of the product, the name and place of business of the manufacturer, packer, distributor, importer or retailer and the net quantity of the product. This standard does not apply to the labeling of prepackaged foods for which a separate standard applies. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
US EAS 346: 2013, Labelling of cosmetics — General requirements | This Uganda Standard specifies requirements for the labelling of cosmetic products. (This Uganda Standard cancels and replaces US 484:2007, Labelling of cosmetic products — General requirements, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 346: 2013, Labelling of cosmetics — General requirements | This Uganda Standard specifies requirements for the labelling of cosmetic products. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 09 November 2016 |
US ISO 10424-1:2004, Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements | This Uganda Standard specifies requirements for the following drill stem elements: upper and lower Kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification | This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
US ISO 22727:2007, Graphical symbols — Creation and design of public information symbols — Requirements | This Uganda Standard specifies requirements for the creation and design of public information symbols. It specifies requirements for the design of public information symbols for submission for registration as approved public information symbols, including line width, the use of graphical symbol elements and how to indicate negation. It also specifies templates to be used in the design of public information symbols. It is for use by all those involved in the commissioning and the creation and design of public information symbols. This standard is not applicable to safety signs, including fire safety signs, or to traffic signs for use on the public highway. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
US 1612:2015, Fresh mushroom – Specification | This Uganda Standard specifies requirements for the carpophores (fruiting bodies) of strains grown from the genus Agaricus (syn. Psalliota) to be supplied fresh to the consumer. This standard does not apply to mushrooms for industrial processing. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
US ISO 5822:1988, Spot welding equipment — Taper plug gauges and taper ring gauges | This Uganda Standard specifies requirements for taper plug and ring gauges used for the checking of type A, B and C tapers according to US ISO 1089. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
US 1619:2015, Fresh tangerine – Specification | This Uganda Standard specifies requirements for tangerines (Citrus tangerina hort. ex Tanaka) grown to be supplied fresh in the export and local markets. This standard does not apply to tangerine for industrial processing. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 22 August 2016 |
US 970-2:2012, Agglomerated stone-slabs and cut-to-size product — Part 2: Product requirements | This Uganda Standard specifies requirements for slabs and cut-to-size product of agglomerated stone which are made for use as vanity, kitchen tops and other similar uses in furnishing and modular tiles of agglomerated stone which are made for use as flooring and stairs for internal and external uses, fixed by mortar or adhesives. | 2013-04-12 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 17 of 12th April 2013 | 10 May 2017 |