English
FrançaisRegulations
Page 21 of 140, showing 20 records out of 2786 total, starting on record 401, ending on 420
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 17078-3:2009, Petroleum and natural gas industries — Drilling and production equipment — Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels | This Uganda Standard provides requirements and guidelines for running tools, pulling tools, kick-over tools and latches used for the installation and retrieval of flow control and other devices to be installed in side-pocket mandrels for use in the petroleum and natural gas industries. This includes requirements for specifying, selecting, designing, manufacturing, quality control, testing and preparation for shipping of these tools and latches. Additionally, it includes information regarding performance testing and calibration procedures | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 17078-2:2007, Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels | This Uganda Standard provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures | 2015-12-15 | The Uganda National Bureau of standards | STATUTORY INSTRUMENTS SUPPLEMENT No. 8 to The Uganda Gazette No. 15 Volume CI dated 14th March, 2008. | 18 August 2016 |
| US ISO 17078-1:2004, Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels | This Uganda Standard provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of US ISO 17078 includes specifying, selecting, designing, manufacturing, quality control, testing, and preparation for shipping of side-pocket mandrels. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 16812:2007, Petroleum, petrochemical and natural gas industries — Shell and-tube heat exchangers | This Uganda Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. This standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. This standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 16528-1:2007, Boilers and pressure vessels — Part 1: Performance requirements | This Uganda Standard defines the performance requirements for the construction of boilers and pressure vessels. It is not the intent of this standard to address operation, maintenance and in-service inspection of boilers and pressure vessels. In relation to the geometry of the pressure-containing parts for pressure vessels, the scope of this standard includes the following: • welding end connection for the first circumferential joint for welded connections; • first threaded joint for screwed connections; • face of the first flange for bolted, flanged connections; • first sealing surface for proprietary connections or fittings; • safety accessories, where necessary. In relation to the geometry of pressure-containing parts for boilers, the scope of this standard covers the following: • feedwater inlet (including the inlet valve) to steam outlet (including the outlet valve), including all inter-connecting tubing that can be exposed to a risk of overheating and cannot be isolated from the main system; • associated safety accessories; • connections to the boilers involved in services, such as draining, venting, superheating, etc. This standard does not apply for nuclear components, railway and marine boilers, gas cylinders or piping systems or mechanical equipment, e.g. turbine and machinery casings. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 16438:2012, Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications | This Uganda Standard specifies requirements for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C. It is applicable to irrigation hoses with nominal diameters between 40 mm and 500 mm and working pressures between 0,3 bar (0,03 MPa) and 6 bar (0,6 MPa). This standard is applicable to two types of hose configurations: distributor hose (with outlet connections) and plain hose (without outlet connections). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 16120-4:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 4: Specific requirements for wire rod for special applications | This Uganda Standard is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-3:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 3: Specific requirements for nominal and rimmed substitute low carbon steel rod | This Uganda Standard is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-2:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purpose rod | This Uganda Standard is applicable to general-purpose steel wire rod for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-1:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements | This Uganda Standard is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16070:2005, Petroleum and natural gas industries — Downhole equipment — Lock mandrels and landing nipples | This Uganda Standard provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries. It includes the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15663-3:2001, Petroleum and natural gas industries —Life-cycle costing —Part 3: Implementation guidelines | This Uganda Standard provides guidelines for the implementation of life-cycle costing for the development and operation of the facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 is applicable when making decisions on any option which has cost implications for more than one cost element or project phase. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15663-2:2001, Petroleum and natural gas industries —Life-cycle costing —Part 2:Guidance on application of methodology and calculation methods | This Uganda Standard provides guidance on application of the methodology for life-cycle costing for the development and operation of facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. This part of US ISO 15663 also provides guidance on the application and calculations of the life-cycle costing process defined in US ISO 15663-1. This part of US ISO 15663 is not concerned with determining the life-cycle cost of individual items of equipment, but rather with life-cycle costing in order to estimate the cost differences between competing project options. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15663-1:2000, Petroleum and natural gas industries —Life cycle costing —Part 1: Methodology | This Uganda Standard specifies requirements for undertaking life-cycle costing for the development and operation of facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15615:2013, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices | This Uganda Standard establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in US ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 15590-3:2004, Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges | This Uganda Standard applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges. This part of US ISO 15590 specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. This part of US ISO 15590 designates those categories of flanges that meet the industry’s need to match ISO 3183 pipe. These flanges are for normal and low-temperature service and include supplementary requirements where required for sour service. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15589-2:2012, Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines | This Uganda Standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection (CP) systems for offshore pipelines for the petroleum, petrochemical and natural gas industries as defined in US ISO 13623. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15589-1:2015, Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines | This Uganda Standard specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in US ISO 13623 for the petroleum, petrochemical, and natural gas industries. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 15551-1:2015, Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling, and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
