English
FrançaisRegulations
Page 22 of 140, showing 20 records out of 2786 total, starting on record 421, ending on 440
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15546:2011, Petroleum and natural gas industries — Aluminium alloy drill pipe | This Uganda Standard specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15544:2000, Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response | This Uganda Standard describes objectives, functional requirements and guidelines for emergency response (ER) measures on installations used for the development of offshore hydrocarbon resources. It is applicable to fixed offshore structures or floating production, storage and off-take systems | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15465:2004, Pipework — Stripwound metal hoses and hose assemblies | This Uganda Standard specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum allowable pressures of up to 40 bar. These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 15463:2003, Petroleum and natural gas industries — Field inspection of new casing, tubing and plain-end drill pipe | This Uganda Standard specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15136-1: 2009, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 1: Pumps | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered by this part of US ISO 15136. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 14998:2013, Petroleum and natural gas industries — Downhole equipment — Completion accessories | This Uganda Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This Uganda Standard provides requirements for the functional specification and technical specifications including: design, design verification and validation, materials, documentation and data control, redress, repair, shipment, and storage. This standard covers the pressure containing, load bearing, disconnect/reconnect, tubing movement, and opening a port functionalities of completion accessories. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 14732: 2013, Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials | This Uganda Standard specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding. | 2015-12-15 | The Uganda National Bureau of standards | 16 August 2016 | |
| US ISO 14693:2003, Petroleum and natural gas industries — Drilling and wellservicing equipment | This Uganda Standard provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of this standard | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 1461:2009, Hot dip galvanized coatings on fabricated iron and steel articles — Specification and test methods | This Uganda Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 14557:2002, Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies | This Uganda Standard gives requirements and test methods for rubber and plastics suction hoses for fire-fighting purposes. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 14373:2006, Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels | This Uganda Standard specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: • uncoated steels; • hot-dip zinc or iron-zinc alloy (galvannealed) coated steel; • electrolytic zinc, zinc-iron, or zinc-nickel coated steel; • aluminium coated steel; ad • zinc-aluminium coated steel. This standard is applicable to the welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm. Welding with the following types of equipment is within the scope of this standard: • pedestal welding equipment; • gun welders; • automatic welding equipment where the components are fed by robots or automatic feeding equipment; • multi welders; and • robotic welders. 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG). | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 1436:2009, Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from to −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US ISO 14313:2007, Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves | This Uganda Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of US ISO 13623 for the petroleum and natural gas industries. This standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723). This standard is not applicable to valves for pressure ratings exceeding PN 420. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 14310:2008, Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs This Uganda Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas | This Uganda Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry. This International Standard provides requirements for the functional specification and technical specification, including design, design verification and validation, materials, documentation and data control, repair, shipment, and storage. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 14245:2006, Gas cylinders — Specification and testing of LPG cylinder valves — Self closing | This Uganda Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 1413:1984, Horology — Shock resistant watches | This Uganda Standard specifies the minimum requirements for shock-resistant watches and describes the corresponding method of test. It is intended to allow homologation testing of watches rather than the individual control of all watches of a production batch. Indeed, assuming that each watch could comply with the minimum requirements without apparent damage, readjustment could still be made necessary because the test can lead to an alteration of the initial rate of a watch. This standard is based on the simulation of the shock received by a watch on falling accidentally from a height of 1 m on to a horizontal hardwood surface. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders | This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
