English
FrançaisRegulations
Page 25 of 140, showing 20 records out of 2786 total, starting on record 481, ending on 500
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 11612:2015, Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements | This Uganda Standard specifies performance requirements for protective clothing made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of this standard are gaiters, hoods, and over boots. However, concerning hoods, requirements for visors and respiratory equipment are not given. The performance requirements set out in this standard are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition) | This Uganda Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition) | This Uganda Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 29 September 2016 |
| US ISO 11425:1996, Rubber hoses and hose assemblies for automobile power steering systems — Specification | This Uganda Standard specifies requirements for five types of hose and hose assembly used in automobile power-steering systems, the five types differing in their pressure ratings and volumetric expansion. They are for use with fluids in the temperature range - 40 “C to + 135 “C. This standard is based on performance tests and, in order to take account of technological developments, no requirements are included for specific materials, detailed construction or manufacturing methods. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 11424:1996, Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification | This Uganda Standard specifies requirements for vulcanized-rubber hoses and tubing for use in the various air and vacuum systems found on internal combustion engines. The standard does not cover hoses used for direct power-brake actuation in trucks and trailers, nor for air intakes and ducting within the passenger compartment. The highest-temperature hoses are generally used for turbocharger applications. All hoses and tubing remain serviceable down to - 40 “C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 11237:2010, Rubber hoses and hose assemblies — Compact wire-braid reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for five types of compact, wire-braid-reinforced hose and hose assembly of nominal size from 5 to 31,5. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification | This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 11119-3: 2013 Gas cylinders— Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load –sharing metallic or non-metallic liners | This Uganda Standard specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard does not address the design, fitting and performance of removable protective sleeves. . | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-2: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-1: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 2 hoop wrapped cylinder or tube with a load-sharing metal liner and composite reinforcement on the cylindrical portion only. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11118:1999, Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods | This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved gases exposed to extreme worldwide ambient temperatures. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 11114-1:2012, Gas cylinders — Compatibility of cylinders and valve materials with gas contents — Part 1: Metallic materials | This Uganda Standard provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content. The compatibility data given is related to single gases and to gas mixtures. Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, liquefied and dissolved gases, are considered. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 1089:1980, Electrode taper fits for spot welding equipment — Dimensions | This Uganda Standard lays down the taper dimensions and tolerances of electrode taper fits for spot welding electrode , electrode adaptors, electrode holders and similar parts. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 10499-2:1998, Industrial tyres and rims — Rubber solid tyres (metric series)for pneumatic tyre rims — Part 2: Load ratings | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 10499-1:1991, Industrial tyres and rims — Rubber solid tyres (metric series)or pneumatic tyre rims — Part 1: Designation, dimensions and marking | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 08 August 2016 | |
| US ISO 10461:2005, Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing | This Uganda Standard deals with seamless aluminium-alloy transportable gas cylinders intended for compressed and liquefied gases under pressure, of water capacity from 0.5 l to 150 l; it also applies, as far as practical, to cylinders of less than 0.5 l water capacity. This standard specifies the requirements for periodic inspection and testing to verify the integrity of such gas cylinders for further service. This standard does not apply to periodic inspection and testing of acetylene cylinders or composite cylinders with aluminium-alloy liners. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 10441:2007, Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications | This Uganda Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the installation. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10439-3:2015, Petroleum, chemical and natural gas service industries — Axial and centrifugal compressors and expander compressors — Part 3: Integrally geared centrifugal compressors | This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies integrally geared centrifugal compressors in conjunction with US ISO 10439‑1. | 0000-00-00 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 10439-2:2015, Petroleum, chemical and gas service industries ⎯ Axial and centrifugal compressors and expander compressors ⎯ Part 2: Non-integrally geared centrifugal and axial compressors | This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in US ISO 10439-1. These machines do not have gears integral with their casing but can have external gears. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
