English
FrançaisRegulations
Page 26 of 140, showing 20 records out of 2786 total, starting on record 501, ending on 520
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 10439-1:2015, Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander compressors ⎯ Part 1: General requirements | This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies general requirements applicable to all such machines. This standard does not apply to fans or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. This standard also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors. Hot gas expanders over 300 °C (570 °F) are not covered by this standard. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-4:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4:Self-acting gas seal support systems | This Uganda Standard in conjunction with US ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-3:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil systems | This Uganda Standard, in conjunction with US ISO 10438-1, specifies requirements for oil systems for general purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-2:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems | This Uganda Standard, in conjunction with of US ISO 10438-1, specifies requirements for oil systems for special purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-1:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements | This Uganda Standard specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of US ISO 10438 is intended to be used in conjunction with US ISO 10438-2, US ISO 10438-3 or US ISO 10438-4, as appropriate. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10437:2003, Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications | This Uganda Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of steam turbines for special-purpose applications. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment. It is not applicable to general-purpose steam turbines, which are covered in ISO 10436. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment | This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10431:1993, Petroleum and natural gas industries — Pumping units — Specification | This Uganda Standard lays down specification covering the design and rating of pumping units. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10427-2:2004, Petroleum and natural gas industries — Equipment for well cementing — Part 2: Centralizer placement and stop-collar testing | This Uganda Standard provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers | This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10426-2:2003, Petroleum and natural gas industries — Cements and materials for well cementing — Part 2: Testing of well cements | This Uganda Standard specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 10426-1:2009, Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification | This Uganda Standard specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 10425:2003, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance | This Uganda Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10424-2:2007, Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Threading and gauging of rotary shouldered thread connections | This Uganda Standard specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as instruments and methods for inspection of thread connections. These connections are intended primarily for use in drill-string components. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 10424-1:2004, Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements | This Uganda Standard specifies requirements for the following drill stem elements: upper and lower Kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 10423:2009, Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment | This Uganda Standard specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 10417:2004, Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress | This Uganda Standard establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, this standard establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10407-2:2008, Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Inspection and classification of used drillstem elements | This Uganda Standard specifies the required inspection for each level of inspection and procedures for the inspection and testing of used drill stem elements. For the purpose of this part of US ISO 10407, drill stem elements include drill pipe body, tool joints, rotary-shouldered connections, drill collar, HWDP and the ends of drill stem elements that make up with them. This part of US ISO 10407 has been prepared to address the practices and technology commonly used in inspection | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 10405:2000, Petroleum and natural gas industries — Care and use of casing and tubing | This Uganda Standard establishes practices for care and use of casing and tubing. It specifies practices for running and pulling casing and tubing, including drifting, stabbing, making up and lowering, field makeup, drifting and landing procedures. Also included are causes of trouble, as well as transportation, handling and storage, inspection and field welding of attachments. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 10380:2012, Pipework — Corrugated metal hoses and hose assemblies | This Uganda Standard specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hoses and metal hose assemblies | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
