Regulations
Page 42 of 140, showing 20 records out of 2786 total, starting on record 821, ending on 840
Title | Description | Implementation date | Source | Publication | Created |
---|---|---|---|---|---|
US EAS 196:2013, High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification | This Uganda Standard specifies the requirements for steel sheet in coils and cut lengths. It applies to the carbon steel and high-strength, low-alloy steel (HSLA) supplied as hot-rolled sheet and cold-rolled sheet. This standard is not applicable to hot-rolled, heavy-thickness carbon sheet coils. In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of the general specification. For the purposes of determining conformance with this specification and the various material specifications, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 412-1:2013, Steel for the reinforcement of concrete — Part 1: Plain bars | This Uganda Standard specifies technical requirements for plain bars to be used as reinforcement in concrete. This part of US EAS 412 covers nine steel grades not intended for welding (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P), and one steel grade (B420DWP) intended for welding. This standard covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded from this standard. (This Uganda Standard cancels and replaces US 155-1:2003, Specification for steel bars for reinforcement of concrete — Plain bars, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 412-2:2013, Steel for the reinforcement of concrete — Part 2: Ribbed bars | This Uganda Standard specifies technical requirements for ribbed bars to be used as reinforcement in concrete. This part of US EAS 412 covers six steel grades not intended for welding (B400A-R, B400B-R, B400C-R, B500A-R, B500B-R and B500C-R), and nine steel grades (B400AWR, B400BWR, B400CWR, B400DWR, B420DWR, B500AWR, B500BWR, B500CWR and B500DWR) intended for welding. The steel grades are designated with steel names allocated in accordance with ISO/TS 4949. (This Uganda Standard cancels and replaces US 155-2:2003, Specification for steel bars for reinforcement of concrete — Ribbed bars, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 468:2013, Pre-painted metal coated steel sheets and coils — Specification | This Uganda Standard specifies requirements for the pre-painted hot-dip metal-coated steel sheets and coils for exterior use. (This Uganda Standard cancels and replaces US 663:2006, Pre-painted metal coated steel sheets and coils — Specification, which has been technically revised and republished) | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US 1560:2013, Rotational moulded polyethylene water storage tank — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for rotational moulded polyethylene water storage tanks (closed and open top tank). This standard is not applicable to underground tanks and mobile water tanks and horizontal cylindrical water tanks | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US ISO 4998:2011, Continuous hot-dip zinc-coated carbon steel sheet of structural quality | This Uganda Standard applies to continuous hot-dip zinc- and zinc-iron-alloy-coated carbon steel sheet of structural quality. The product is intended for applications where resistance to corrosion is of prime importance. The steel sheet is produced in a number of grades, coating mass, ordering conditions and surface treatments. This standard does not cover steels designated as commercial quality, or drawing quality. (This Uganda Standard cancels and replaces US 649:2006, Continuous hot-dip zinc-coated carbon steel sheet of structural quality, which has been technically revised and republished) | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US ISO 6935-3:1992, Steel for the reinforcement of concrete — Part 3: Welded fabrics | This Uganda Standard specifies technical requirements for factory made sheets or rolls of welded fabric, manufactured from steel wires or bars with diameters from 4 mm to 16 mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of pre-stressed concrete structures. (This Uganda Standard cancels and replaces US EAS 412-3:2005, Steel for the reinforcement of concrete — Part 3: Welded fabric, which has been republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US ISO 7900:2006, Steel wire and wire products for fences — Zinc- and zinc-alloy coated steel barbed wire | This Uganda Standard specifies the characteristics of zinc- and zinc-alloy-coated steel barbed wire, with conventional and reverse twist consisting of two stranded line wires, around which the barbs are tightly wound, a twist being imparted between the barbs to restrict their movement. The barbed-wire entanglement has a single line wire, around which the barbs are wound. (This Uganda Standard cancels and replaces US 193:2001, Specification for steel wires and wire products used for fencing, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US ISO 7989-2:2007, Steel wire and wire products — Nonferrous metallic coatings on steel wire — Part 2: Zinc or zinc-alloy coating | This Uganda Standard specifies the requirements for the coating mass per unit area, for other properties and also for testing of zinc or zinc-alloy coatings on steel wire and steel wire products, of circular or other section. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US 833-1:2013, Sawn softwood timber — Part 1: General requirements | This Uganda Standard specifies requirements for visually, mechanically and proof-graded sawn softwood timber, for use as structural timber, brandering and batten, for frame wall construction and for structural purposes derived from the trees of genus Pinus. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US 833-2:2013, Sawn softwood timber — Part 2: Stress-graded structural timber and timber for frame wall construction — Specification | This Uganda Standard specifies requirements for three stress grades of visually graded structural timber and three stress grades of mechanically graded structural timber (including finger-jointed structural timber). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US 833-3:2013, Sawn softwood timber — Part 3: Industrial timber — Specification | This Uganda Standard specifies requirements for six grades of timber intended for industrial use. This standard does not apply timber intended for structural use. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US 833-4:2013, Sawn softwood timber — Part 4: Brandering and battens — Specification | This Uganda Standard specifies requirements for one grade of timber suitable for use as brandering and battens intended for being fixed against beams and joists in roofs for the attachment of ceilings and for the boxing in of eaves, and for use as supports on roof trusses for the fixing of roofing slates, tiles, wooden shingles and thatch. | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 334: 2013, List by category of cosmetic products | This Uganda Standard lays down the list of products that are classified as cosmetics. (This Uganda Standard cancels and replaces US 442-1:2002, Illustrative list by category of cosmetic products, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 335: 2013, Cologne — Specification | This Uganda Standard specifies the requirements and methods of test for cologne intended for human use. This standard shall also apply to toilet waters, lavender waters and all alcohol-based fresheners. (This Uganda Standard cancels and replaces US 505:2003, Cologne — Specification, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 336: 2013, Chemical depilatories — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for chemical depilatories of alkaline-thioglycollic acid composition. This standard does not cover depilatories of epilatory type and those having metallic sulphides or stannite composition. (This Uganda Standard cancels and replaces US 506:2003, Chemical depilatories – Specification, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 337: 2013, Henna powder — Specification | This Uganda Standard specifies the requirements, and methods of sampling and test for pure henna powder. (This Uganda Standard cancels and replaces US 507:2003 Specification for henna powder, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 338: 2013, Chemical hair relaxers and hair waving products — Specification | This Uganda Standard specifies requirements and methods of sampling and test for chemical hair relaxers and hair waving products. This standard applies to chemical cream hair relaxers based on alkalis or thioglycollates, as well as hair waving (curling) products based on thioglycollates | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 339: 2013, Hair creams, lotions and gels — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for hair creams, lotions and gels based on vegetable oil or mineral oil, or any combination of the above, with fatty acids or fatty acid emulsions. It also applies to hair conditioners and setting lotions. This standard does not cover hair sprays, hair sheens or hair oils including hair creams, lotions and gels for which therapeutic claims are made. (This Uganda Standard cancels and replaces US 487:2003, Hair creams, lotions and gels –Specification, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |
US EAS 341: 2013, Nail polish removers — Specification | This Uganda Standard specifies the requirements and methods of sampling and test for nail polish removers used for cosmetic purposes. (This Uganda Standard cancels and replaces US 486:2003, Nail polish removers — Specification — Part 1: Organic solvent based, which has been technically revised and republished). | 2014-01-27 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014 | 12 April 2017 |