English
FrançaisRegulations
Page 43 of 140, showing 20 records out of 2786 total, starting on record 841, ending on 860
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US 1565:2014, Standard specification for water emulsion floor polish | This Uganda Standard covers floor polish intended for use on all non-wood floors and on sealed-wood floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US EAS 811-5: 2014, Code of practice for safety of electrical installations — Part 5: Operation of electric supply lines, communication lines and equipment | This Uganda Standard specifies the practical work requirements to be followed during installation, operation and maintenance of electric supply and communications lines and equipment as a means of safeguarding employees and the public from injury. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 122:1999, Sulfuric acid — Specification | This Uganda Standard prescribes the requirements and the methods of sampling and test for sulfuric acid. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-3:2002, Polishes — Specification — Part 3: Floor polish water emulsion buffable type | This Uganda Standard prescribes requirements and methods of test for water emulsion floor polish buffable type. This standard applies to a buffable water emulsion floor polish for general application on vinyl, thermoplastic, linoleum, rubber vinyl asbestos, asphalt terrazo, marble, cured concentrate ceramic and quarry tiles. It shall not be used on wooded, cork or magnesite floors unless these are properly sealed. Floor polish in this specification is for polishes used on floor areas that are subjected to heavy abraise foot traffic and any areas where buffing is desired. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 3862:2009, Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water based fluids — Specification | This Uganda Standard specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH and −40 °C to +120 °C for types R12, R13 and R15. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US EAS 294:2002, Scouring powders — Specification | This Uganda Standard specifies requirements and methods of test for synthetic household detergent scouring powder for the removal of tenacious soil from hard surfaces and kitchen utensils. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 295:2002, Sodium hypochlorite solutions for domestic use — Specification | This Uganda Standard specifies requirements for dilute solutions of sodium hypochlorite intended for domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 3949:2009, Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification | This Uganda Standard specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US EAS 361:2004, Carbaryl dusting powders — Specification | This Uganda Standard prescribes the requirements and the methods of test for carbaryl dusting powders. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 3994:2007, Plastics hoses — Helical-thermoplastic reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification | This Uganda Standard specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from − 10 °C to + 55 °C. The three types of hose are for light-, medium- and heavy-duty applications. The types of hoses covered in this standard are not intended for use with flammable or combustible materials, nor with aromatic solvents | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 8124-1:2007, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 4079:2009, Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification | This Uganda Standard specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 ºC or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 4081:2010, Rubber hoses and tubing for cooling systems for internal combustion engines — Specification | This Uganda Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internal combustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) | This Uganda Standard specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use | This Uganda Standard specifies requirements and test methods for activity toys for domestic family use intended for children under 14 years to play on or in. Products covered by this part of US ISO 8124 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of one or more children. Products not included within the scope of this part of US ISO 8124 are: a) fitness and sporting equipment unless attached to the activity toy; b) equipment intended for use in schools, day care centres, kindergartens, public playgrounds, restaurants, shopping centres and similar public places; c) juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds or furniture including picnic tables, cradle rockers and products specifically designed for therapeutic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| ISO 4641:2010, Rubber hoses and hose assemblies for water suction and discharge — Specification | This Uganda Standard specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: ambient temperatures: −25 °C to +70 °C; andwater temperatures during operation: 0 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 22 September 2016 |
| US EAS 386:2005, Used footwear ― Inspection and acceptance criteria ― Code of practice | This Uganda Standard prescribes a Code of Practice for the inspection and acceptance criteria for used footwear. This standard applies to used footwear of all types and sizes irrespective of their intended end use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 9994: 2005 Lighters — Safety specification/ US ISO 9994: 2005/Amd.1: 2008, Lighters — Safety specification | This standard establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes. The safety specification given in this standard cannot eliminate all hazards, but is intended to reduce potential hazards to users. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
