English
FrançaisRegulations
Page 64 of 140, showing 20 records out of 2786 total, starting on record 1261, ending on 1280
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| TZS 775: 2014 Chemical hair relaxers and hair waving products — specification | This measure specifies requirements and methods of sampling and test for chemical hair relaxers and hair waving products. It also applies to chemical cream hair relaxers based on alkalis or thioglycollates, as well as hair waving (curling) products based on thioglycollates. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | TZS 775: 2014 | 26 September 2016 |
| TZS 775: 2014 Chemical hair relaxers and hair waving products — specification | This measure specifies requirements and methods of sampling and test for chemical hair relaxers and hair waving products. It also applies to chemical cream hair relaxers based on alkalis or thioglycollates, as well as hair waving (curling) products based on thioglycollates. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | TZS 775: 2014 | 26 September 2016 |
| TZS 781: 2015 Whisky — Specification | This measure prescribe the requirements for whisky (whiskey). It does not apply to whisky concentrate, which shall be subject to further processing before consumption. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 781: 2015 | 26 September 2016 |
| TZS 782-1: 2015Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements | This measure specifies the metrological and technical requirements for water meters for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 782-1: 2015 | 26 September 2016 |
| TZS 782-4: 2015Water meters for cold potable water and hot water — Part 4: Non-metrological requirements | This measure applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 782-4: 2015 | 26 September 2016 |
| TZS 782-5: 2015 Water meters for cold potable water and hot water — Part 5: Installation requirements | This measure applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume. | 2015-11-07 | Tanzania Bureau of Standards (TBS) | TZS 782-5: 2015 | 26 September 2016 |
| Asbestos-Cement pipes for sewerage and drainage | Specifies requirements for asbestos- cement pipes suitable for gravity flow lines at atmospheric pressure for sewage and drainage applications. | 1978-01-13 | Standards Assocaition of zimbabwe | Statutory Instrument 41 of 1978 | 26 September 2016 |
| TZS 1547: 2012 Ophthalmic optics – Specification for single-vision ready-towear near-vision spectacles | This measure specifies the minimum requirements for complete single-vision ready-to-wear nearvision spectacles. These spectacles are not intended for regular use without the approval of an eyecare professional | 2012-07-06 | Tanzania Bureau of Standards (TBS) | TZS 1547: 2012 | 27 September 2016 |
| TZS 1548-1: 2012 Ophthalmic optics – Semi-finished spectacle lens blanks – Part 1: Specifications for single-vision and multifocal lens blanks | This measure specifies requirements for the optical and geometrical properties of semi-finished single-vision and multifocal spectacle lens blanks | 2012-07-06 | Tanzania Bureau of Standards (TBS) | TZS 1548-1: 2012 | 27 September 2016 |
| TZS 1548-2: 2012 Ophthalmic optics – Semi-finished spectacle lens blanks – Part 2: Specifications for progressive power lens blanks | This measure specifies requirements for the optical and geometrical properties of semi-finished progressive power spectacle lens blanks. | 2012-07-06 | Tanzania Bureau of Standards (TBS) | TZS 1548-2: 2012 | 27 September 2016 |
| TZS 1591: 2013 Motorcycle and scooter tyres — Specification | This measure prescribes the requirements and methods of sampling and test for motorcycle and scooter tyres. Performance of on road requirement of the tyres is not covered in this measure. | 2013-05-07 | Tanzania Bureau of Standards (TBS) | TZS 1591: 2013 | 27 September 2016 |
| Regulations on management of urban waste | The Regulation aims at establishing management rules of urban residue | 0000-00-00 | INNOQ | Solid waste - Classification referenced in Decree 94/2014 | 27 September 2016 |
| TZS 726: 2011 Semi-gloss solvent borne paints for interior and exterior use – Specification | This measure specifies requirements for semi-gloss solvent borne paints for interior and exterior use. | 2011-07-28 | Tanzania Bureau of Standards (TBS) | TZS 726: 2011 | 28 September 2016 |
| US ISO 4642-1:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter. Hoses conforming to this part of US ISO 4642 are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works. This part of US ISO 4642 applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 4642-2:2009, Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | This Uganda Standard specifies the requirements and test methods for semi-rigid reel hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). This part of US ISO 4642 applies to delivery hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5359:2008, Low-pressure hose assemblies for use with medical gases | This Uganda Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen; nitrous oxide; medical air; helium; carbon dioxide; xenon; specified mixtures of the gases listed above; oxygen-enriched air; air for driving surgical tools; nitrogen for driving surgical tools; vacuum. It is intended in particular to ensure gas-specificity and to prevent cross-connection between systems conveying different gases. These hose assemblies are intended for use at maximum operating pressures of less than 1 400 kPa. This standard specifies the allocation of (NIST), (DISS), (SIS) connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors. This standard does not specify:requirements for coaxial hoses used for the supply and disposal of air for driving surgical tools; andrequirements for electrical conductivity.This standard does not specify the intended uses of hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5771:2008, Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification | This Uganda Standard specifies the minimum requirements for rubber hoses used for transferring ammonia, in liquid or in gaseous form, at ambient temperatures from −40 °C up to and including +55 °C. It does not include specifications for end fittings, but is limited to the performance of the hoses and hose assemblies. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5772:1998, Rubber hoses and hose assemblies for measured fuel dispensing — Specification | This Uganda Standard specifies the requirements for three types of rubber hose and hose assembly used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15 % oxygenated compounds). The three types of hose are as follows:type 1: hoses with textile reinforcement suitable for reeling on a drum or hanging in bends;type 2: hoses with textile and helical wire reinforcement designed for torsional flexibility, suitable for coiling, reeling on a drum or hanging in bends; and type 3: hoses with fine wire reinforcement designed for low dilation, suitable for reeling on a drum or hanging in bends. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 5774:2006 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification | This Uganda Standard specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from − 10 °C to + 60 °C. The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
| US ISO 6134:2005, Rubber hoses and hose assemblies for saturated steam — Specification | This Uganda Standard specifies requirements for two types of hoses and hose assemblies, low pressure with a maximum working pressure of 6 bar and high pressure with a maximum working pressure of 18 bar, made of rubber and hose fittings made of metal, designed to convey saturated steam and hot water condensate. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 28 September 2016 |
