English
FrançaisRegulations
Page 65 of 140, showing 20 records out of 2786 total, starting on record 1281, ending on 1300
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 11119-3: 2013 Gas cylinders— Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load –sharing metallic or non-metallic liners | This Uganda Standard specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard does not address the design, fitting and performance of removable protective sleeves. . | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-2: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 11119-1: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l | This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 2 hoop wrapped cylinder or tube with a load-sharing metal liner and composite reinforcement on the cylindrical portion only. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 7225:2005, Gas cylinders — Precautionary labels | This Uganda Standard specifies the design, content (that is, hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this standard.. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification | This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification | This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 971-4:2014, Liquefied Petroleum Gases (LPG) — Part 4: Specification | This Uganda Standard specifies the requirements and methods of sampling and test for those products commonly referred to as liquefied petroleum gases, consisting predominantly of C3 hydrocarbons (propane/propene); C4 hydrocarbons (butane/butene); and mixtures of C3 and C4 hydrocarbons. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US ISO 32:1977, Gas cylinders for medical use — Marking for identification of content | This Uganda Standard establishes a system of marking and a series of colours for the identification of the content of gas cylinders intended for medical use only. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1511:2014, Oxygen for medical use — Specification | This Uganda Standard specifies the requirements, methods of sampling and test requirements for oxygen for medical use only. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 704: 2014; Absorbent cotton wool — Specification | This Uganda Standard specifies requirements and methods of test for absorbent cotton (surgical cotton or cotton wool) wool for medical use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1575:2014, Spring mattresses — Specification | This Uganda Standard specifies requirements and test methods for spring mattresses intended for institutional and domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1574:2014, Standard performance specification for towel products for institutional and household use | This Uganda Standard covers the evaluation of specific performance characteristics of importance in woven and knitted kitchen towel, dishcloth, crash towel, huck towel, washcloth, hand towel, bath towel, and bath sheet products for use in institutional and household environments. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers | This Uganda Standard establishes performance requirements, test methods and marking requirements to promote safe use of soft infant and toddler carriers. | 0000-00-00 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| Plugs, socket outlets, and socket outlet adaptors | Three-pin plugs | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 | |
| US 1583:2014, Fishing nets —Specification | This Uganda Standard specifies requirements for fishing nets. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US 307:2014, Mosquito nets — Specification (3RD Edition) | This Uganda Standard specifies requirements for long lasting insecticidal mosquito nets intended for malaria vector control. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| US EAS 386:2005, Used footwear ― Inspection and acceptance criteria ― Code of practice | This Uganda Standard prescribes a Code of Practice for the inspection and acceptance criteria for used footwear. This standard applies to used footwear of all types and sizes irrespective of their intended end use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 04 October 2016 |
| Plugs, socket outlets, and socket outlet adaptors- Specification | Three-pin plugs, socket outlets and socket outlet adaptors | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 | |
| Fortified edible oils-Specification | requirements for fortified edible oil derived from oil seeds and oil bearing fruits | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 | |
| Malawi Bureau of Standards Act | Requirements for Chilli sauce | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 |
