English
FrançaisRegulations
Page 91 of 140, showing 20 records out of 2786 total, starting on record 1801, ending on 1820
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 356:2004, Code of practice for inspection and acceptance criteria for used textile products | This Uganda Standard prescribes a code of practice for the inspection and acceptance criteria for used textile products. It also applies to used garments of all types, sizes and fibre composition | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 9994: 2005 Lighters — Safety specification/ US ISO 9994: 2005/Amd.1: 2008, Lighters — Safety specification | This standard establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes. The safety specification given in this standard cannot eliminate all hazards, but is intended to reduce potential hazards to users. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| Hydraulic brake fluids | Covers requirements for DOT 3 and DOT 4 fluids in hydraulic brake system of motor vehicles, containers of these fluids and labeling of the containers | 2015-12-07 | Standards Assocaition of zimbabwe | 14 September 2016 | |
| US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use | This Uganda Standard specifies requirements and test methods for activity toys for domestic family use intended for children under 14 years to play on or in. Products covered by this part of US ISO 8124 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of one or more children. Products not included within the scope of this part of US ISO 8124 are: a) fitness and sporting equipment unless attached to the activity toy; b) equipment intended for use in schools, day care centres, kindergartens, public playgrounds, restaurants, shopping centres and similar public places; c) juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds or furniture including picnic tables, cradle rockers and products specifically designed for therapeutic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) | This Uganda Standard specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 8124-1:2007, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties (2nd Edition) | This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 361:2004, Carbaryl dusting powders — Specification | This Uganda Standard prescribes the requirements and the methods of test for carbaryl dusting powders. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 295:2002, Sodium hypochlorite solutions for domestic use — Specification | This Uganda Standard specifies requirements for dilute solutions of sodium hypochlorite intended for domestic use. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 294:2002, Scouring powders — Specification | This Uganda Standard specifies requirements and methods of test for synthetic household detergent scouring powder for the removal of tenacious soil from hard surfaces and kitchen utensils. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-3:2002, Polishes — Specification — Part 3: Floor polish water emulsion buffable type | This Uganda Standard prescribes requirements and methods of test for water emulsion floor polish buffable type. This standard applies to a buffable water emulsion floor polish for general application on vinyl, thermoplastic, linoleum, rubber vinyl asbestos, asphalt terrazo, marble, cured concentrate ceramic and quarry tiles. It shall not be used on wooded, cork or magnesite floors unless these are properly sealed. Floor polish in this specification is for polishes used on floor areas that are subjected to heavy abraise foot traffic and any areas where buffing is desired. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 290-2:2002, Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) | This Uganda Standard prescribes the requirements and the methods of test for solvent based floor polishes (liquid and paste). The standard applies to solvent based floor polishes liquid or paste, that are intended for use on all wooden and solvent-resistant floors. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 122:1999, Sulfuric acid — Specification | This Uganda Standard prescribes the requirements and the methods of sampling and test for sulfuric acid. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-5: 2014, Code of practice for safety of electrical installations — Part 5: Operation of electric supply lines, communication lines and equipment | This Uganda Standard specifies the practical work requirements to be followed during installation, operation and maintenance of electric supply and communications lines and equipment as a means of safeguarding employees and the public from injury. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| Restraining devices (safety Belts) for occupants of adult build in motor vehicles | This standard is mandatory through Zimbabwe Government Roads and Road Traffic legislation. The specification applies to safety belts and restraint systems which are designed for separate use by person of adult build occupying forward-facing seats. | 1987-09-01 | Standards Assocaition of zimbabwe | 14 September 2016 | |
| US EAS 811-4:2014, Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines | This Uganda Standard specifies safety requirements for the installation and maintenance of underground electric supply and communication lines. It prescribes the associated structural arrangements and the extension of such systems into buildings. It also covers the cables and equipment employed primarily for the utilization of electric power when such cables and equipment are used by the utility in the exercise of its function as a utility. This standard does not apply for installations in electric supply stations. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-3:2014, Code of practice for safety of electrical installations — Part 3 :Installation and maintenance of overhead electric supply and communication lines | This Uganda Standard specifies safety requirements for installation and maintenance of overhead electric supply and communication lines and their associated equipment. It prescribes the associated structural arrangements of such systems and the extension of such systems into buildings. It includes requirements for spacing, clearances, and strength of construction. This part of US EAS 811 does not apply to installations in electric supply stations except as required by US EAS 811-1. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US EAS 811-2:2014, Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment | This Uganda Standard specifies the safety requirements for installations, operations and maintenance of electric supply stations. It also provides safety guidelines to personnel involved in electric supply stations and their associated structural arrangements that are accessible only to qualified personnel. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| TZS 1003:2009 Guide to the prepackaging of fruits and vegetables | This measure gives general guidance on the conditions and the methods of prepacking and packing for transport of the main types of fruits and vegetables sold fresh. | 2009-04-27 | Tanzania Bureau of Standards (TBS) | TZS 1003:2009 | 14 September 2016 |
| US EAS 811-1: 2014, Code of practice for safety of electrical installations — Part 1: General | This Uganda Standard specifies the terms and definitions, symbols and methods of earthing of electrical supply, communication facilities and associated equipment. It applies to all new and existing installations and extensions. This standard does not cover the earthed return of electric railways nor those lightning protection wires that are normally independent of supply or communication wires or equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
