English
FrançaisNon-tariff Measures
Showing items 6121 to 6140 of 7642
-
Applied by Zambia on the entire world for
The measure came into effect on 18 July 2003
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 18 July 2003
- Publication where the measure is specified
- Statutory Instrument No. 78 of 2003
- Regulation where the measure is specified
- ZS 264:1990 Specification for hair creams
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Prescribes requirements for hair creams and other oil based emulsion preparations for the hair.
Covers quality requirements, sampling, testing, packing and marking - Reference of the measure
- Page 369 of SI 78 of 2003
- Measure also domestic
- No
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 22 Cosmetics No - Description
- Prescribes requirements for hair creams and other oil based emulsion preparations for the hair.
Covers quality requirements, sampling, testing, packing and marking
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 05 July 2013
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 05 July 2013
- Publication where the measure is specified
- Statutory Instrument no. 59 of 2013
- Regulation where the measure is specified
- ZS 688: Part 5:Electric Cables with Extruded Solid Dielectric Insulation for Fixed Installations (300/500 V TO 1 900/3 300 V) – Specification Part 5: Halogen-free distribution cables - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- This part of ZS 688 Part 5: Halogen-free distribution cables, covers the requirements for construction, materials, dimensions and electric properties of single-core and multicore halogen-free cables of rated operating voltages (U0/U) 600/1 000 V to 1 900/3 300 V, for use in fixed installations.
Also covers inspection and testing requirements - Reference of the measure
- ZS 688 Part 5
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Halogen-free electrical distribution cables
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 19 November 2010
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 19 November 2010
- Publication where the measure is specified
- Statutory Instrument no. 102 of 2010
- Regulation where the measure is specified
- ZS 723: Peanut Butter - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Prescribes requirements and test methods for stabilised or unestablished peanut butter of two textures:
a) Smooth type; and
b) "Crunchy" type.
Covers quality requirements, hygiene, packaging, labelling, sampling and testing, contaminant, chemical, physical and microbiological requirements - Measure also domestic
- Yes
Products affected by the measure.
- Description
- Peanut butter of two textures:
a) Smooth type; and
b) "Crunchy" type.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for 8423: Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds. and 9016.00.00: Balances of a sensitivity of 5 cg or better, with or without weights.
The measure came into effect on 20 February 1998
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 20 February 1998
- Publication where the measure is specified
- Supplement to the Republic of Zambia Government Gazette dated 20/02/1998. statutory Instrument No 22 of 1998,the weights and Measures Act
- Regulation where the measure is specified
- The weights and Measures (assize) regulations, 1998
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 22. (1) An automatic weighing instrument shall be—
(a) of a pattern brought into use after the thirtieth day of October,1964 and certified by the Superintendent Assizer under section fifteen of the Act;
(b) securely fixed in position in which it will operate;
(c) tested in situ with the produce it is intended to weigh;
(d) fitted with seals to protect all adjusting devices or have all such devices operable only with a special detachable key;
(e) marked with clear marks, of identification on all parts that require to be dismantled; for any purpose whatsoever but which marks give a clear indication of the parts which match on re-assemble;
(f) provided with suitable means of extracting from any hopper or conveyor such loads or sample deliveries as the assizer may require for the tests;
(g) tested by taking not less than twenty sample deliveries either at random or in sequence, which tests shall be repeated as many times as the assizer considers necessary; and
(h) marked with a stamp of assize upon a lead plug in a conspicuous place on the beam, main body or frame of the instrument.
(2) The limits of error allowed on an automatic weighing machine shall be 1 scale interval at a load below 2000 scale intervals and for load exceeding 2000 scale intervals, the limit of error at initial assizing shall be increased to 2 stale intervals - Reference of the measure
- Part IV section 22 (c), (c)
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8423 Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds. Yes Automatic weighing instruments 9016.00.00 Balances of a sensitivity of 5 cg or better, with or without weights. No - Description
- Automatic weighing instruments
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 20 February 1998 - Description
- All countries
-
Applied by Zambia on the entire world
The measure came into effect on 13 April 2017
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 April 2017
- Publication where the measure is specified
- Metrology Act, 2017
- Regulation where the measure is specified
- The Metrology Act No 6 of 2017
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- 24 (3) The Executive Director shall cause the measuring instrument submitted for type approval to be inspected and tested by a laboratory, as appropriate,against the requirements of the relevant regulations provided for in section 22 for that type of measuring instrument
40. (1) Despite anything to the contrary in this Act, a person who imports, manufactures or sells a commodity or measuring instrument in respect of which a legal metrology measure is in force shall, at the written request of the Agency, within the period stated in the request, at that person’s own cost—
(a) transmit to the Agency such samples, as may be specified in the request, of the commodity for inspection, testing or analysis
(4) The result of an inspection, test or analysis of a sample of a product or measuring instrument shall, unless the contrary is proved, be deemed to be valid for the whole consignment or batch from which the sample was obtained - Reference of the measure
- PART VI: Section 24(3);
PART IX: Sections 40(1a) ; 40(4) - Measure also domestic
- Yes
Products affected by the measure.
- Description
- Measuring instrument
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for 8423: Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds. and 9016.00.00: Balances of a sensitivity of 5 cg or better, with or without weights.
The measure came into effect on 20 February 1998
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 20 February 1998
- Publication where the measure is specified
- Supplement to the Republic of Zambia Government Gazette dated 20/02/1998. statutory Instrument No 22 of 1998,the weights and Measures Act
- Regulation where the measure is specified
- The weights and Measures (assize) regulations, 1998
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 23. (1) Except where otherwise provided in regulation 18 tests shall be carried out for all weighing instruments at the following loads:
(a) zero load;
(b) maximum load, including if possible maximum additive tare loads;
(c) half load; and
(d) loads at which the method of balancing is modified by addition or subtraction of a unit weight.
(2) Self-indicating weighing instruments shall in addition be tested at—
(a) capacity of self-indication if different from maximum load; or
(b) loads at which the limit of error defined in
(a) changes; or
(c) at as many loads as the assizer considers desirable in view of the particular construction - Reference of the measure
- Part IV section 23
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8423 Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds. Yes Weighing Machines 9016.00.00 Balances of a sensitivity of 5 cg or better, with or without weights. No - Description
- Weighing Machines
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 20 February 1998 - Description
- All countries
-
Applied by Zambia on the entire world for 8423.8: - Other weighing machinery :
The measure came into effect on 20 February 1998
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 20 February 1998
- Publication where the measure is specified
- Supplement to the Republic of Zambia Government Gazette dated 20/02/1998. statutory Instrument No 22 of 1998,the weights and Measures Act
- Regulation where the measure is specified
- The weights and Measures (assize) regulations, 1998
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 25. (1) In a counter machine—
(a) the supports of the pans shall be of rigid structure; and
(b) the centre fork shall be so secured that it cannot twist or get out of place.
(2) A counter machine constructed on the beranger principle shall, if it is—
(a) a closed beranger, have—
(i) its working parts totally enclosed in a housing; and (ii) parts which, if interchangeable, do not affect the balance if interchanged;
(b) an open beranger, have—
(i) a capacity not exceeding 15kg;
(ii) a number stamped on any loose pan and on the frame or beam, which number shall commence with the final two digits of the year in which it was manufactured;
(iii) the weights pan of integral construction or securely fixed to its cross by means of two or more rivets;
(iv) the support for the goods-pan of welded or riveted construction and without holes in its upper surface;
(v) a frame of cast iron or mild steel, which stands level upon a level plate without rocking;
(vi) in the case of a steel frame, not less than three spreaders between the two sides to stiffen them;
(vii) if it is provided with anchor links, such links as are irremovable without the use of a mechanical appliance, and hardened taper pins as guard pins or securing the links; and Counter machines
(viii) pans of such shape that no tipping of the pan occurs when weights equal to half the capacity of the machine are placed in any position on the either pan.
(3) Material for balancing purposes shall be contained in a balance box which is—
(a) securely fixed to the under surface of a fixed weights pan or of the support for the weights-pan; and
(b) capable of containing lead to a weight not exceeding one per cent of the capacity of the machine.
(4) On a counter machine, the travel of the beam each way from the horizontal position shall be, where the capacity of the machine is—
(a) not over 2kg, not less than 6mm;
(b) over 2kg and not over 5kg, not less than 7mm;
(c) over 5kg and not over 10kg, not less than 8mm;
(d) over 10kg and not over 20kg, not less than 10mm; or
(e) over 20kg, not less than 12mm.
(5) A counter machine shall be tested—
(a) for eccentricity with a load equal to 1/3 of maximum capacity and any difference in indication due to this test shall not exceed the maximum permissible error specified in tables 3, 5 and 6 of the First Schedule;
(b) with a weight or weights equal to 1/3 of maximum capacity of the machine placed on the goods pan any where within a distance from the centre equal to 1/3 the greatest length of the pan or, if the pan has a vertical side, against the middle of that side and a similar weight placed in any position on the weights pan, and the machine shall indicate the same weight within half the limit of error specified in Tables 3, 5 and 6
of the Third Schedule;
(c) at capacity, with the weights placed centrally on each pan, unless the goods pan is in the form of a scoop in which case half the total weight shall be placed against the middle of the back of the scoop and the other half in any position on the scoop: Provided that the sensitiveness and discrimination errors shall be the maximum permissible errors specified in Tables 3, 5 and6 of the First Schedule.
(6) The stamp of assize shall be stamped upon a lead plug inserted in a conspicuous and easily accessible part of the beam: Provided that in the case of an enclosed beranger, it may be stamped upon the housing or upon a lead plug inserted therein - Reference of the measure
- Part IV section 25 (5)
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8423.8 - Other weighing machinery : Yes Counter Machines - Description
- Counter Machines
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 20 February 1998 - Description
- All countries
-
Applied by Zimbabwe on the entire world for 2710.12.19: Other
The measure came into effect on 22 February 2013
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 22 February 2013
- Publication where the measure is specified
- Statutory Instrument 23 0f 2013
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Ethanol Blend
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Distillation, colour, octane, induction period, lead content etc. use applicable method or when relevant, one of the applicable methods listed in column 4 and 5 of table 1
- Reference of the measure
- Article 5.1, p.8
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2710.12.19 Other Yes Ethanol Blend E5 - Description
- Ethanol Blend E5
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 2207.20.19: Other and 2207.20.99: Other
The measure came into effect on 22 February 2013
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 22 February 2013
- Publication where the measure is specified
- Statutory Instrument 23 0f 2013
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Denatured fuel ethanol for blending with gasoline for use as automotive spark ignition engine fuel
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- The precision of test methods can differ from the reported precision when testing denatured fuel ethanol. Tests for water, acidity, pHe are specified
- Reference of the measure
- Article 8, p. 4
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2207.20.19 Other Yes Denatured Fuel Ethanol 2207.20.99 Other Yes Denatured Fuel Ethanol - Description
- Denatured Fuel Ethanol
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 4407: Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- statutory instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Sawn softwood timber: Stress-graded Structural timber and timber for frame wall construction
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- In the case of proof-graded 50 mm x 76 mm timber, test each piece in the sample in accordance with appendix C of ZWS 257.1. In the case of other mechanically stress-graded timber test each piece in the sample in accordance with ZWS 218 and verify that the lot has been correctly stress-graded./
- Reference of the measure
- Article 5.2, p. 10
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 4407 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Yes Sawn softwood timber: stress-graded - Description
- Sawn softwood timber: stress-graded
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 6810.99.00: Other
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- statutory instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Burnt Clay Masonry Units
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Carry out all the tests, a minimum of 59 units is required.
- Reference of the measure
- Article 7.3, p. 7
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 6810.99.00 Other Yes Burnt Clay Masonry units - Description
- Burnt Clay Masonry Units
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3915.30: Of polymers of vinyl chloride, 3917.2: Tubes, pipes and hoses, rigid :, 3917.3: Other tubes, pipes and hoses : and 3917.40.00: Fittings
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- statutory instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Unplasticised polyvinyl chloride (UPVC) Soil, waste and vent pipes and pipe fittings
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Test specimens from a pipe or fitting in the sample, cut a test piece of area approximatey 100 mm x 40 mm place it between the two plates and place the assembly and allow it to cool for 120 +- 5min
- Reference of the measure
- Article 8.3.2, p. 24
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3915.30 Of polymers of vinyl chloride Yes soil and waste, unplasticised 3917.2 Tubes, pipes and hoses, rigid : Yes pipes, unplasticised pvc 3917.3 Other tubes, pipes and hoses : Yes pipes, unplasticised pvc 3917.40.00 Fittings Yes unplasticised pvc - Description
- Soil, waste and vent pipes and pipe fittings
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3917.23: Of polymers of vinyl chloride and 3917.3: Other tubes, pipes and hoses :
The measure came into effect on 05 June 1981
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 05 June 1981
- Publication where the measure is specified
- Statutory Instrument 271 of 1981
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Components of pressure pipe systems: Modified (Vinyl chloride) (PVC-M) Pressure pipe systems
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Select a test specimen of length at least 200 mm and draw a reference line along its complete length
- Reference of the measure
- Article 7.4.2, p.18
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3917.23 Of polymers of vinyl chloride Yes Pressure pipes (Unplasticised Poly (Vinyl Chloride) 3917.3 Other tubes, pipes and hoses : Yes Pressure pipes (Unplasticised Poly (Vinyl Chloride) - Description
- Pressure pipes (Unplasticised Poly (Vinyl Chloride)
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3923: Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics.
The measure came into effect on 28 May 2010
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 28 May 2010
- Publication where the measure is specified
- Statutory Instrument 98 of 2010
- Regulation where the measure is specified
- Environmental Management (Plastic Packaging and Plastic Bottles) Regulations, 2010.
- Country/Region applying the measure
- Zimbabwe
- The rationale of the measure
- The purpose of compulsory specification is to assist the implementation of the Plastic Packaging and Plastic Bottles Regulations in order to protect the environment
- Coded list of objectives
- E: Protection of the environment
- Description of the measure
- Test methods
3(a) Measure the thickness of the plastic film using the method described in SAZ-ISO4893, and check the results for compliance;
(b) Type of ink (nitrocellulose spot test) If Type A Ink is claimed, the claimant shall not exhibit any change of colour, the general principle is that a solution of diphenylamine in concentrated sulfuric acid is used to indicate the presence of nitrocellulose, the re-agent causes an almost instantaneous formation of a dark blue colour on contact with nitrocellulose.
CAUTION:
The substances used for this test are extremely dangerous. Gloves and safety glasses should be used throughout the preparation and use of this solution.
(i). Preparation of test solution.
A. Carefully mix together the following ingredients in a conical flask whilst cooling the flask under running water-
(1) 0.5g diphenylamine (C12 H11 N);
(2) 10,0 g water; and
(3) 30,0 g concentrated sulphuric acid (98%)
CAUTION:
Add the acid slowly to the water.
B. carefully add a further 60,0g of concentrated sulphuric acid, and mix gently.
C. transfer the contents of the flash to a dark glass bottle, and label and date the bottle,
NOTE:
The solution should have a shelf life of approximately one month. The solution will initially be a yellow/ orange colour, and it should be discarded and prepared afresh if it sows any signs of discolouration (which would probably indicate a reaction with light, oxidation or contamination).
(ii) Procedure
A. Place one drop of the test solution on a sample of the dried ink to be tested.
B. Check after thirty seconds for any colour change,
If the colour changes to the dark blue, it indicates the presence of nitrocellulose.” - Reference of the measure
- SCHEDULE (Section 2 and 3)
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics. No - Description
- Packaging that is made from thermo-plastic materials and covers plastic, and carrier packaging both domestically produced and imported for use within Zimbabwe
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by Zimbabwe on the entire world for 3917.23: Of polymers of vinyl chloride
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- statutory instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Unplasticised polyvinyl chloride (UPVC) sewer and drain pipes and pipe fittings
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Unless otherwise specified in (Or inconsistent with) a method, condition all test specimens for at least 16 h under standard test conditions (see 2.8) before testing them and conduct the tests under these conditions.
- Reference of the measure
- Article 8.2, p. 26
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3917.23 Of polymers of vinyl chloride Yes UPVC sewer and drain pipes - Description
- UPVC sewer and drain pipes
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3917.23: Of polymers of vinyl chloride and 3917.3: Other tubes, pipes and hoses :
The measure came into effect on 05 June 1981
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 05 June 1981
- Publication where the measure is specified
- Statutory Instrument 271 of 1981
- Regulation where the measure is specified
- Zimbabwe Standard Specification for Components of Pressure Pipe Systems: Unplasticised Poly (Vinyl Chloride) Pressure pipe system
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- From each sample cut a specimen of size approximately 100 mm x 40 mm, place it between two plates pre-heeated to 180 °C, and place the assembly in the oven for 120 +- 5 min
- Reference of the measure
- Article 7.2.2, p.33
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3917.23 Of polymers of vinyl chloride Yes Pressure pipes (Unplasticised Poly (Vinyl Chloride) 3917.3 Other tubes, pipes and hoses : Yes Pressure pipes (Unplasticised Poly (Vinyl Chloride) - Description
- Pressure pipes (Unplasticised Poly (Vinyl Chloride)
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3917.23: Of polymers of vinyl chloride
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- statutory instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standards Specification for Unplasticized polyvinyl chloride (UPVC) components for rainwater systems
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Conditioning unless otherwise specified in the method, condition all test specimen for at least 16 h under standard test conditions before testing them and conduct the test under these conditions
- Reference of the measure
- Article 6, p.9
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3917.23 Of polymers of vinyl chloride Yes UPVC pipes for rainwater system - Description
- UPVC pipes for rainwater system
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 2517.10.00: Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated and 6904.90.00: Other
The measure came into effect on 13 January 1978
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 13 January 1978
- Publication where the measure is specified
- Statutory Instrument 41 of 1978
- Regulation where the measure is specified
- Zimbabwe Standard for Methods for sampling and testing of aggregates and fillers
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- The aggregate impact value gives a relative measure of the resistance of an aggregate to sudden shock or impact, which in some aggregates differs from its resistance to a slowly applied compressive load.
- Reference of the measure
- Article 5, p.74
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2517.10.00 Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated Yes aggregates 6904.90.00 Other Yes fillers - Description
- aggregates and fillers
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 8535.90.00: Other and 8536.69.00: Other
The measure came into effect on 28 May 1976
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 28 May 1976
- Publication where the measure is specified
- Electricity (Consumers' Appliances) Regulations, 1976
- Regulation where the measure is specified
- Zimbabwe Standard Specification for 13 A Plugs, socket-outlets, Adaptors and connection units: Part 1: Rewirable and non rewirable 13 A fused plugs
- Country/Region applying the measure
- Zimbabwe
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Unless otherwise specified in this part the socket-outlets shall be tested as delivered by the manufacturer or responsible vendor and under normal conditions of use, at an ambient temperature of 20 +_ 5 °C, after being conditioned at normal laboratory temperature and humidity levels for at least 4 days
- Reference of the measure
- Article 5, p. 10
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8535.90.00 Other Yes 13 A Plugs 8536.69.00 Other Yes 13 A Plugs - Description
- 13 A Plugs
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zimbabwe on the entire world for 3004.90.10: Medicaments used in the management of chronic illnesses; approved by the secretary responsible for health, 3004.90.20: Preparations containing a drug not categorised as prescription preparation and 3004.90.90: Other
The measure came into effect on 11 September 2015
Non-Tariff Measure
- NTM classification
- B82: Testing requirement
- Date when the measure came into force
- 11 September 2015
- Publication where the measure is specified
- Statutory Instrument 97 of 2015
- Regulation where the measure is specified
- Medicines and Allied Substances Control (Complementary Medicines) Regulations, 2015
- Country/Region applying the measure
- Zimbabwe
- The rationale of the measure
- Not stated in the regulations
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 9. (1) For the purposes of subsection (6)(b) - 'finished product “in relation to a complementary medicine means complementary medicine which is wholly manufactured outside Zimbabwe and is imported into Zimbabwe and is ready for sale without having to be relabelled or repackaged.
(2) Any person who is required to make an application shall complete the appropriate form and shall furnish the Director- General, or some other person appointed by him or her , with such further information or particulars as may be required.
(3) An application for the approval of a complementary medicine may be made by –
(a) the Principal; or
(b) any other person acceptable to the Authority.
(4) Every application for the approval of a complementary medicine shall be submitted in form C.M.1 in duplicate.
(5) In addition to subsection (4) , such application shall be accompanied by the following –
(a ) a sample of the complementary medicine in the smallest of each of the package form available for distribution to the public including the identification marks on such complementary complimentary medicine where appropriate, or if such package forms are not yet available , a sample in package , in which the applicant intends to make the complementary medicine available for distribution to the public; and (b) detailed information of all package inserts which the applicant intends to use; and
(c) such samples of the complementary medicine or the raw materials thereof as the Authority may request for the analysis; and
(d) a single copy of any literature in support of the application. Provided that the Authority may require additional copies of such literature.
(e) a draft package insert or where there is no package insert, three labels or copies of the package and
(f) one copy of all records and batch data relating to a particular batch , where appropriate or possible, which shall include raw material analytical reports, master sheets relating to manufacture and packaging , in-process control records, final product analytical records and authorization for release , and any other relevant records; and
(g) the appropriate fee, together with such additional fee as may be fixed by the authority for the purpose of analysing such complimentary medicines.
(6) Every applicant shall, without delay inform the authority either before or after the approval of a complementary medicine-
(a) of any alteration from the information or particulars furnished by him or her in applying for approval in terms of subsections (4) and (5) ; and
(b) whether the complementary medicine is to be imported as a finished product , into or relabelled or repackaged or dealt with in any manner in Zimbabwe. - Reference of the measure
- Art 9 (5) (a) and (c)
- Measure also domestic
- No
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3004.90.10 Medicaments used in the management of chronic illnesses; approved by the secretary responsible for health No 3004.90.20 Preparations containing a drug not categorised as prescription preparation No 3004.90.90 Other No - Description
- Aromatherapeutic substances, Ayurvedic Medicines, Energy Substances or Medicines, Homeopathic Remedies, Nutritional Substance in pharmaceutical form, Traditional Chinese Medicines, Traditional Dutch Remedies, Unanni Tibb Medicines, Western Herbal Medicines and such other medicines or remedies as may be approved by the Authority
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
B82: Testing requirement
