English
FrançaisRegulations
Page 10 of 140, showing 20 records out of 2786 total, starting on record 181, ending on 200
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 61427-1:2013, Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application | This Uganda Standard gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems and to the typical methods of test used for the verification of battery performances. This part deals with cells and batteries used in photovoltaic off-grid applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61427-2:2015; Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 2: On-grid applications | This Uganda Standard relates to secondary batteries used in on-grid Electrical Energy Storage (EES) applications and provides the associated methods of test for the verification of their endurance, properties and electrical performance in such applications. The test methods are essentially battery chemistry neutral, i.e. applicable to all secondary battery types. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US US IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long term operation in general open air climates, as defined in IEC 60721-2-1 | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61215-1-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1 | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61215-2:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1. This part of US IEC 61215 is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60432-1:1999+AMD1:2005+AMD2:2011, Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | This Uganda Standard specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60095-1:2006, Lead-acid starter batteries — Part 1: General requirements and methods of test | This Uganda Standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". This standard specifies general requirements; essential functional characteristics, relevant test methods and results required, for several classes of starter batteries; according to the general type of application; and according to the type of product. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60095-2:2009, Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals | This Uganda Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-1:2011, Power transformers — Part 1: General | This Uganda Standard applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; transformers, which have no windings with rated voltage higher than 1 000 V; instrument transformers; amongst others. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-2:2011, Power transformers — Part 2: Temperature rise for liquid-immersed transformers | This Uganda Standard applies to liquid-immersed transformers, identifies power transformers according to their cooling methods, defines temperature rise limits and gives the methods for temperature rise tests. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-3:2013, Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air | This Uganda Standard applies to power transformers as defined by and in the scope of US IEC 60076-1. It gives details of the applicable dielectric tests and minimum dielectric test levels. Recommended minimum external clearances in air between live parts and between live parts and earth are given for use when these clearances are not specified by the purchaser. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit | This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60282-1:2014, High-voltage fuses — Part 1: Current-limiting fuses | This Uganda Standard applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60282-2:2008, High-voltage fuses — Part 2: Expulsion fuses | This Uganda Standard specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V. This standard covers only the performance of fuses, each one comprising a specified combination of fuse-base, fuse-carrier and fuse-link which have been tested in accordance with this standard; successful performance of other combinations cannot be implied from this standard. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 127-2:2014, Synthetic detergent powders — Specification — Part 2: Machine wash | This Uganda Standard specifies the requirements and methods of sampling and test for synthetic detergents for machine wash. It does not cover hand wash powders and industrial detergent powders. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 812-1:2015, Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash | This Uganda Standard specifies the requirements and methods of test for synthetic and combined (soap and synthetic) hand wash. This standard does not apply to soap-based hand wash. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 815: 2015, Soap noodles — Specification | This Uganda Standard specifies requirements and methods of test for soap noodles used as an intermediate product for subsequent conversion into a marketable soap. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 816-1: 2015, Synthetic liquid laundry detergents — Specification — Part 1: Hand wash | This Uganda Standard specifies the requirements and methods of sampling and test for machine wash synthetic liquid laundry detergents. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 816-2:2015, Synthetic liquid laundry detergents — Specification — Part 2: Machine wash | This Uganda Standard specifies the requirements and methods of sampling and test for machine wash synthetic liquid laundry detergents. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
