English
FrançaisRegulations
Page 9 of 140, showing 20 records out of 2786 total, starting on record 161, ending on 180
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6361-2:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips, and plates for general engineering applications. It applies to flat-rolled products. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-3:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy strip by cold-rolling for general engineering applications. It applies to products with thickness of over 0.15 mm up to, and including 16 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock), or to special products such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-4:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet and plate by hot-rolling or cold-rolling for general engineering applications. It applies to products with a thickness over 0,15 mm up to and including 203 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products, such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-5:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-1:2012, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products. | 2016-08-12 | National Forest Authority | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of the following: • wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; • wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | 03 September 2016 | |
| US ISO 6362-7:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 209:2007, Aluminium and aluminium alloys — Chemical composition | This Uganda Standard specifies the designations indicating the chemical composition of aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 1642:2016, Domestic biogas stoves — Specification | This Uganda Standard covers construction, operation, safety requirements and methods of test for stoves intended for use with domestic biogas systems. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 1643:2016, Domestic biogas lamp — Specification | This Uganda Standard covers construction, operation, safety requirements, sampling and methods of test for lamps intended for use with biogas | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 194-1:2016, Nails — Part 1: Steel nails — Specification | This Uganda Standard specifies requirements for preferred form and dimensions, tolerance on dimensions, finish and surface coating for the type of steel nails and of loose steel wire nails for general applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 1461:2009, Hot dip galvanized coatings on fabricated iron and steel articles — Specification and test methods | This Uganda Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-1:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements | This Uganda Standard is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-2:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purpose rod | This Uganda Standard is applicable to general-purpose steel wire rod for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-3:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 3: Specific requirements for nominal and rimmed substitute low carbon steel rod | This Uganda Standard is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-4:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 4: Specific requirements for wire rod for special applications | This Uganda Standard is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
